--- loncom/build/Makefile	2002/05/13 08:28:33	1.108
+++ loncom/build/Makefile	2004/03/08 20:18:30	1.156.2.6
@@ -1,14 +1,18 @@
 # The LearningOnline Network with CAPA
 
-# Scott Harrison
-# $Id: Makefile,v 1.108 2002/05/13 08:28:33 harris41 Exp $
+# $Id: Makefile,v 1.156.2.6 2004/03/08 20:18:30 albertel Exp $
 
+# TYPICAL USAGE of this Makefile is primarily for two targets:
+# "make build" and "make install".
+# Many other targets and features are supported (see the initial
+# help targets).
+
+# ======================================= Default settings for Makefile options
 DISTPROBE=`perl ./distprobe`
 DIST=$(DISTPROBE)
 CATEGORY="development"
 SOURCE=../..
 TARGET=""
-DIRTARGET=loncapa
 NORESTORECONF="0"
 HOSTNAME=""
 LAUNCH=| perl
@@ -18,45 +22,196 @@ SAVE=program.pl.$(TIMESTAMP)
 LAUNCHSAVE=$(OUTSTREAM) $(SAVE)
 METAMTARGET=""
 MTARGET=""
-VERSION=0.1
-
+VERSION=1.1.2
+# The current working definition for "RELEASE" is: changes not in the software,
+# but in the operating system dependent packaging of the software.  Thus, the
+# generic tarball releases do not need to have a release number specified.
+RELEASE=1 # As a general rule for now, this is always being set to "1".
+DIRTARGET=loncapa-$(VERSION)
+LOCALAUTHPATH=/home/httpd/lib/perl
+
+# =============================================== Help targets for the Makefile
+# If 'make' is run without any arguments, the 'help' target is called since
+# it is the first target.
 help:
 	@echo "*** You need to specify a valid target ***"
-	@echo "NOTE: You can specify options to your Makefile target."
+	@echo "To get a list of valid targets: \"make help_TARGETS\""
+	@echo "To get a list of valid options: \"make help_OPTIONS\""
+	@echo " "
+	@echo "Typically invoked targets are:"
+	@echo "    make build"
+	@echo "    make install"
+	@echo "    make test"
+	@echo "    make clean"
+
+help_OPTIONS:
+	@echo "* ADJUSTABLE OPTIONS *"
 	@echo "(option) DIST can be redhat7, debian, redhat6.2, or default"
-	@echo "(option) CATEGORY can be runtime or development"
-	@echo "(option) SOURCE is an absolute or relative directory path"
-	@echo "(option) TARGET is an absolute or relative directory path"
-	@echo "build: compile the CVS source tree"
-	@echo "install: install from a compiled CVS source tree to a "
-	@echo "         specified TARGET destination on the filesystem"
-	@echo "test: test different parts of the LON-CAPA system (TEST_*)"
-	@echo "TEST_lpml_scripts: make sure that the system can process "
-	@echo "                   the Linux Packaging Markup Language"
+	@echo "         You probably do not need to specify this; it is"
+	@echo "         automatically probed for."
+	@echo "(option) CATEGORY can be 'runtime' or 'development'; currently"
+	@echo "         the 'development' setting is the most reliable;"
+	@echo "         eventually, production machines should be using the"
+	@echo "         'runtime' settings"
+	@echo "(option) SOURCE is an absolute or relative directory path."
+	@echo "         SOURCE corresponds to the root directory of the"
+	@echo "         loncapa source release"
+	@echo "(option) TARGET is an absolute or relative directory path."
+	@echo "         This is where files will be installed on your system."
+	@echo "         Typically, this should be set to nothing (which"
+	@echo "         corresponds to the '/' root of the entire filesystem)."
+	@echo "(option) NORESTORECONF, when set to a non-zero value, stops"
+	@echo "         filesystem upgrades from overwriting existing "
+	@echo "         configuration files.  Ordinarily, NORESTORECONF=0, "
+	@echo "         because the existing configuration files are safely"
+	@echo "         dealt with (or so one hopes... :) )."
+	@echo "(option) HOSTNAME specifies the name of a remote server for"
+	@echo "         which a NET_* Makefile target should be launched"
+	@echo "(option) VERSION; especially useful for the 'tardist' target"
+	@echo "         this tags the tarball file and internal directories"
+	@echo "         with a specific version string (conventionally "
+	@echo "         numeric)"
+
+help_TARGETS:
+	@echo "*** RUNNING TESTS TO ENSURE SOLID PERFORMANCE ***"
+	@echo "test: test different parts of the LON-CAPA system (TEST_*)."
+	@echo "      Makefile-dependent processes as well as horizontal and"
+	@echo "      vertical aspects of the LON-CAPA system architecture"
+	@echo "      are all tested."
+	@echo "TEST_lpml_scripts: make sure that the system can process"
+	@echo "                   the Linux Packaging Markup Language."
+	@echo "                   This is neither horizontal or vertical"
+	@echo "                   testing.  The idea is to make sure that"
+	@echo "                   the installation software itself works"
+	@echo "                   as expected."
 	@echo "TEST_system_dependencies: make sure that all needed system "
 	@echo "                          components are active and present "
 	@echo "                          on the server such as perl modules"
 	@echo "                          and the MySQL database"
-	@echo "TEST_web_layer: mimic a login and various system actions on "
+	@echo "                          (horizontal testing)"
+	@echo "TEST_web_layer: mimic a login and various vertical actions on "
 	@echo "                a LON-CAPA system"
+	@echo "TEST_hosts_and_domain_tab: make sure that a "
+	@echo "        loncapa/loncom/hosts.tab and loncapa/loncom/domain.tab"
+	@echo "        file is specified for installation"
+	@echo "TEST_html2ps: test for the presence of html2ps which is needed"
+	@echo "              for making a PDF compilation for pdfdoc"
+	@echo "*** GENERAL TARGETS SUCH AS 'build' AND 'install' ***"
+	@echo "build: compile the source tree"
+	@echo "buildflag: a semaphore that helps educate the user to run"
+	@echo "           'make build' first before running 'make install'"
+	@echo "configinstall: install configuration files and restore with"
+	@echo "               prior information"
+	@echo "install: install from a ***compiled*** source tree"
+	@echo "         (see make build) to a specified TARGET destination"
+	@echo "         on the filesystem (default setting is TARGET=/)."
+	@echo "rawinstall: just install files, links and directories without"
+	@echo "            any bells or whistles (e.g. double-checking"
+	@echo "            configurations, fine-tuning webserver, etc.)"
+	@echo "hosts_and_domain_tab: install the hosts.tab and domain.tab" 
+	@echo "                      to the filesystem"
+	@echo "webserverconf: fine-tune the web server configuration;"
+	@echo "               make sure the proper 'Include' statements"
+	@echo "               are appended to httpd.conf"
+	@echo "vanillatar: generate top-level files such as README, UPDATE,"
+	@echo "            CHECKRPMS, and TEST (needed by tardist)"
+	@echo "tardist: build a tarball that will upgrade the software on a "
+	@echo "         system"
+	@echo "sanitycheck: probe for common errors and recommend fixes to"
+	@echo "             the user"
+	@echo "updatequery: solicit the user for machine configuration"
+	@echo "             information; to be incorporated during an update"
+	@echo "             procedure (via the UPDATE command)"
+	@echo "postinstall: double-check things after installation"
+	@echo "VERSION: tag the filesystem with version information inside"
+	@echo "         /etc/loncapa-release and"
+	@echo "         /home/httpd/html/lon-status/version.txt"
+	@echo "aboutVERSION: place version information inside about.html"
+	@echo "              and loncapa_apache.conf"
+	@echo "*** Makefile.* TARGETS BUILT DYNAMICALLY FROM loncapafiles.lpml ***"
+	@echo "Makefile.configinstall: generate a Makefile for configuration"
+	@echo "                        files; built dynamically from"
+	@echo "                        loncapafiles.lpml"
+	@echo "Makefile.build: generate a Makefile for compiling"
+	@echo "                files inside the source directory; "
+	@echo "                Makefile.build is generated from"
+	@echo "                loncapafiles.lpml"
+	@echo "Makefile.install: generate a Makefile for installing"
+	@echo "                  files; built dynamically from"
+	@echo "                  loncapafiles.lpml"
+	@echo "*** TARGETS FOR OPERATING ON FILESYSTEMS ACROSS THE NETWORK ***"
+	@echo "lpmladm: coordinates username=lpmladm mediated secure shell"
+	@echo "         processes; needed for the NET_* targets"
+	@echo "NET_hosts_and_domain_tab: install the hosts.tab and domain.tab"
+	@echo "                          to a filesystem elsewhere"
+	@echo "                          on the network"
+	@echo "NET_webserverconf: fine-tune the web server configuration on a"
+	@echo "                   filesystem elsewhere on the network"
+	@echo "NET_rawinstall: launch the rawinstall target on a filesystem"
+	@echo "                elsewhere on the network"
+	@echo "*** TARGETS FOR MAKING LISTS (MANIFESTS) OF LON-CAPA FILES ***"
+	@echo "MANIFEST_all: generate a list of all files to be included in"
+	@echo "              the distributed tarball"
+	@echo "MANIFEST_cvs: essentially a list of all CVS/Entries files used"
+	@echo "              for 'time-checking' intelligence"
+	@echo "MANIFEST_lpml: a list of all LON-CAPA files to be installed,"
+	@echo "               compile from, used as building software, and"
+	@echo "               testing"
+	@echo "MANIFEST_vanillatar: 'README'-type top-level files that a user"
+	@echo "                     of the distributed tarball would first"
+	@echo "                     look at and work with"
+	@echo "*** STATUS REPORT TARGETS ***"
+	@echo "warningnote: analyze the WARNINGS file and produce a synopsis"
+	@echo "             and recommended action to the user"
 	@echo "HTML: generate an HTML-formatted description of the LON-CAPA"
-	@echo "      CVS files"
-	@echo "documentation_tree: compiles a documentation tree from the "
-        @echo "                    CVS:doc directory"
-	@echo "status: compare the TARGET filesystem with a compiled CVS "
+	@echo "      source files"
+	@echo "status: compare the TARGET filesystem with a compiled loncapa "
 	@echo "        source directory"
 	@echo "statuspost: post the results of "make status" to "
 	@echo "            TARGET/home/httpd/html/lon-status/filestatus.html"
 	@echo "rpmstatus: compare the rpms on a system to defined lists "
-	@echo "           CVS:doc/otherfiles/cd_rpms and "
-	@echo "           CVS:doc/otherfiles/rpm_list.txt"
-	@echo "rpmstatuspost: post the results of "make rpmstatus" to "
+	@echo "           loncapa/doc/otherfiles/cd_rpms and "
+	@echo "           loncapa/doc/otherfiles/rpm_list.txt"
+	@echo "rpmstatuspost: post the results of 'make rpmstatus' to "
 	@echo "            TARGET/home/httpd/html/lon-status/rpmstatus.html"
-	@echo "RPM: build LON-CAPA-base RPM from CVS repository"
-	@echo "setup_RPM: build LON-CAPA-setup RPM from CVS repository"
-	@echo "           handy for CD-ROM generation"
-	@echo "tardist: build a tarball that will upgrade the software on a "
-	@echo "         system"
+	@echo "*** ALTERNATIVE PACKAGING TARGETS ***"
+	@echo "RPM: build LON-CAPA-base RPM from loncapa source repository"
+	@echo "     (still under development)"
+	@echo "DPKG: build a loncapa Debian package from loncapa source"
+	@echo "      repository (still under development)"
+	@echo "base_rpm_file_list: create a file listing to be used for"
+	@echo "                    generating an RPM software package"
+	@echo "BinaryRoot: create a BinaryRoot directory to be used for"
+	@echo "            generating an RPM software package"
+	@echo "*** MASTER DOCUMENTATION TARGETS ***"	
+	@echo "doc: generate web-page documentation for install.lon-capa.org"
+	@echo "     (and eventually for documentation on installed machines)"
+	@echo "pdfdoc: make a PDF-formatted compilation of all installation"
+	@echo "        documentation"
+	@echo "*** KEEPING THINGS CLEAN ***"
+	@echo "clean: remove any files that might (even by remote chance)"
+	@echo "       interfere with rebuilding/recompiling software"
+	@echo "reallyclean: remove all files that were generated during"
+	@echo "             building or compilation of the software"
+	@echo "uninstall: remove all directories that do not contain files"
+	@echo "           from other software packages and that do not contain"
+	@echo "           student and instructor data; NOTE THAT THIS IS"
+	@echo "           INTERACTIVE--you will be given a final chance"
+	@echo "           to look at what will and will not be deleted."
+	@echo "           Still, be careful.  This is a very new target and is"
+	@echo "           an alpha-level software feature for now."
+	@echo "backup: rolls a tarball backup of all important student and "
+	@echo "        instructor data (NOT YET IMPLEMENTED)"
+	@echo "restore: reseeds a LON-CAPA server with tarball backups "
+	@echo "         generated by \"make backup\" (NOT YET IMPLEMENTED)"
+	@echo "*** AUXILIARY TESTS ***"
+	@echo "localauth: tests to see if localauth exists or not and run"
+	@echo "           appropriate tests"
+	@echo "*** A HELPFUL DEPENDENCY ***"
+	@echo "alwaysrun: blank target that is a dependency for targets"
+	@echo "           that should \"always run\""
+
+# =========================== *** RUNNING TESTS TO ENSURE SOLID PERFORMANCE ***
 
 test: TEST_lpml_scripts TEST_system_dependencies TEST_web_layer
 	@echo "ALL SYSTEM DEPENDENCY TESTS SUCCESSFUL"
@@ -75,8 +230,8 @@ TEST_web_layer:
 
 TEST_hosts_tab:
 	@echo "Testing hosts.tab"
-	@if (test -h ../hosts.tab); then \
-		echo "there is a defined link; assume okay"; \
+	@if (test -e ../hosts.tab); then \
+		echo "there is a defined link or file; assume okay"; \
 	else echo "**** ERROR **** hosts.tab not defined!" && \
 	     echo -n "You need to do one of the following within your " && \
 	     echo "CVS repository (cd loncapa/loncom)" && \
@@ -87,21 +242,222 @@ TEST_hosts_tab:
 	     exit 1; \
 	fi
 
-NET_hosts_tab:
-	make TIMESTAMP=`date +"%s"` METAMTARGET="TRANSPORT" \
-	MTARGET="hosts_tab" HOSTNAME="$(HOSTNAME)" lpmladm
+TEST_domain_tab:
+	@echo "Testing domain.tab"
+	@if (test -e ../domain.tab); then \
+		echo "there is a defined link or file; assume okay"; \
+	else echo "**** ERROR **** domain.tab not defined!" && \
+	     echo -n "You need to do one of the following within your " && \
+	     echo "CVS repository (cd loncapa/loncom)" && \
+	     echo "   1) ln -s production_domain.tab domain.tab" && \
+	     echo "   2) ln -s development_domain.tab domain.tab" && \
+	     echo "or 3) ln -s rawhide_domain.tab domain.tab" && \
+	     echo "(you most likely want option #1, production_domain.tab)" && \
+	     exit 1; \
+	fi
+
+TEST_html2ps:
+	@if (test -e /usr/local/html2ps/bin/html2ps); then \
+		echo "I can find html2ps; assume okay"; \
+	else \
+	echo "**** ERROR **** cannot find /usr/local/html2ps/bin/html2ps!" && \
+        echo "Please visit http://www.tdb.uu.se/~jan/html2ps.html" && \
+	exit 1; \
+	fi
+
+# ======================= *** GENERAL TARGETS SUCH AS 'build' AND 'install' ***
 
-hosts_tab: TEST_hosts_tab
+build: Makefile.build pod2html.sh pod2man.sh
+	install -d $(SOURCE)/doc/man
+	install -d $(SOURCE)/doc/scripts
+	install -d $(SOURCE)/doc/lib/perl/Apache
+	echo -n "" > WARNINGS
+	make -f Makefile.build all
+	echo '1' > buildflag
+	make warningnote
+
+buildflag:
+	@echo "**** ERROR **** You need to run 'make build' first" > WARNINGS
+	make warningnote
+	@need_to_run_make_build_first 2>/dev/null
+
+configinstall: Makefile.configinstall
+	make -f Makefile.configinstall SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
+	configfiles
+	if (test "0" = $(NORESTORECONF)); then \
+	perl loncaparestoreconfigurations suffix .lpmlnew; fi
+
+install: buildflag VERSION TEST_hosts_tab TEST_domain_tab Makefile.install Makefile
+	echo -n "" > WARNINGS
+	make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
+	directories
+	make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" files
+	make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" links
+	make SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
+	NORESTORECONF="$(NORESTORECONF)" configinstall
+	make postinstall
+	make warningnote
+	@echo "You can now run 'make test' to see if your system is ready to go!"
+#	@echo "NOTE THAT YOUR SYSTEM MUST HAVE MYSQL WITH A USER=\"www\" AND"
+#	@echo -n "PASSWORD=\"localhostkey\" FOR www\@localhost"
+#	@echo -n "(YOU MAY NEED TO REINITIALIZE YOUR MYSQL www\@localhost USER)"
+#	@echo -n "Please see http://install.lon-capa.org/ for more information"
+
+rawinstall: VERSION Makefile.install Makefile
+	echo -n "" > WARNINGS
+	make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
+	directories
+	make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" files
+	make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" links
+	make SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
+	NORESTORECONF="$(NORESTORECONF)" configinstall
+
+hosts_and_domain_tab: TEST_hosts_tab TEST_domain_tab
 	cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
 	perl xfml_parse.pl $(SOURCE)/doc/loncapafiles/valid_hosts.xfml | \
 	perl lpml_parse.pl install $(CATEGORY) $(DIST) "$(SOURCE)" \
 	"$(TARGET)" > Makefile.install
 	make -f Makefile.install directories
 	make -f Makefile.install files
-	@echo "If hosts.tab has changed, restart httpd and loncontrol:"
+	@echo "If hosts.tab or domain.tab has changed, restart httpd and loncontrol:"
 	@echo "   /etc/rc.d/init.d/httpd restart"
 	@echo "   /etc/rc.d/init.d/loncontrol restart"
 
+webserverconf:
+	cat $(SOURCE)/doc/loncapafiles/webserver.piml | \
+	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH)
+
+# ---------------- Top-level files such as README, UPDATE, CHECKRPMS, and TEST
+vanillatar:
+	# --------------------------- Point UPDATE to the internal make process
+	echo '#!/bin/sh' > $(SOURCE)/UPDATE
+	echo 'touch loncom/build/WARNINGS' >> $(SOURCE)/UPDATE;
+	echo 'ln -s loncom/build/WARNINGS WARNINGS' >> $(SOURCE)/UPDATE;
+	echo 'cd loncom/build; make build' >> $(SOURCE)/UPDATE
+	echo 'make rawinstall' >> $(SOURCE)/UPDATE
+	echo 'make configinstall' >> $(SOURCE)/UPDATE
+	echo 'make updatequery' >> $(SOURCE)/UPDATE
+	echo 'make hosts_and_domain_tab' >> $(SOURCE)/UPDATE
+	echo 'make postinstall' >> $(SOURCE)/UPDATE
+	echo 'make aboutVERSION' >> $(SOURCE)/UPDATE
+	echo 'make warningnote' >> $(SOURCE)/UPDATE
+	# ----------------------------- Point TEST to the internal make process
+	echo '#!/bin/sh' > $(SOURCE)/TEST
+	echo 'cd loncom/build; make test' >> $(SOURCE)/TEST
+	echo 'cd system_dependencies || cd loncom/build/system_dependencies; cp -v CPAN_STATUS_REPORT ../../../CPAN_STATUS_REPORT' >> $(SOURCE)/TEST
+	# ----------------------------- Copy CHECKRPMS to the vanilla top-level
+	cp -v $(SOURCE)/loncom/build/CHECKRPMS $(SOURCE)/CHECKRPMS
+	# ----------------------- vanilla executables must indeed be executable
+	chmod a+rx $(SOURCE)/UPDATE
+	chmod a+rx $(SOURCE)/TEST
+	chmod a+rx $(SOURCE)/CHECKRPMS
+	# -------------------------------- Copy README to the vanilla top-level
+	#cp -v $(SOURCE)/doc/shortest_path_redhat7.2.txt $(SOURCE)/README
+
+tardist:
+	make MANIFEST_all
+	make vanillatar
+	# -------------------------------------------------------- Make tardist
+	@cd $(SOURCE); \
+	if (test -h $(DIRTARGET)); then \
+		echo "$(DIRTARGET) link already defined; assume okay"; \
+	else \
+		ln -s . $(DIRTARGET); \
+	fi
+	cp -v $(SOURCE)/loncom/license/about.html \
+	$(SOURCE)/loncom/license/about.html.orig
+	cp -v $(SOURCE)/loncom/loncapa_apache.conf \
+	$(SOURCE)/loncom/loncapa_apache.conf.orig
+	make aboutVERSION
+	cd $(SOURCE); \
+	tar --no-recursion --numeric-owner --files-from MANIFEST \
+	-h -czf $(DIRTARGET).tar.gz 2>tar_WARNINGS || [ "0" == "0" ]
+	mv -v $(SOURCE)/loncom/license/about.html.orig \
+	$(SOURCE)/loncom/license/about.html
+	mv -v $(SOURCE)/loncom/loncapa_apache.conf.orig \
+	$(SOURCE)/loncom/loncapa_apache.conf
+	cat $(SOURCE)/tar_WARNINGS | \
+	xargs --replace=XXX echo '**** WARNING **** XXX' > WARNINGS
+	rm -f $(SOURCE)/tar_WARNINGS
+	make warningnote
+
+sanitycheck:
+	cat $(SOURCE)/doc/loncapafiles/sanitycheck.piml | \
+	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
+	tee -a WARNINGS
+
+updatequery:
+	cat $(SOURCE)/doc/loncapafiles/updatequery.piml | \
+	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(QUERYLAUNCH)
+
+accesscount_seed:
+	cat $(SOURCE)/doc/loncapafiles/accesscount_seed.piml | \
+	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
+	tee -a WARNINGS
+
+reseval_fixup:
+	cat $(SOURCE)/doc/loncapafiles/reseval_fixup.piml | \
+	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
+	tee -a WARNINGS
+
+clearoutoldspreadsheetcache:
+	cat $(SOURCE)/doc/loncapafiles/clearoutoldspreadsheetcache.piml | \
+	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
+	tee -a WARNINGS
+
+sendmail_fix:
+	cat $(SOURCE)/doc/loncapafiles/sendmail_fix.piml | \
+	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
+	tee -a WARNINGS
+
+postinstall:
+	make webserverconf
+	make reseval_fixup
+	make accesscount_seed
+	make clearoutoldspreadsheetcache
+	make sanitycheck
+	make sendmail_fix
+
+VERSION:
+	install -d $(TARGET)/etc
+	echo -n "LON-CAPA release $(VERSION)-" > $(TARGET)/etc/loncapa-release
+	date +"%Y%m%d" >> $(TARGET)/etc/loncapa-release
+	install -d $(TARGET)/home/httpd/html/lon-status
+	echo -n "$(VERSION)-" > $(TARGET)/home/httpd/html/lon-status/version.txt
+	date +"%Y%m%d" >> $(TARGET)/home/httpd/html/lon-status/version.txt
+
+aboutVERSION:
+	cat $(SOURCE)/loncom/license/about.html | \
+	perl -e '$$d=`date +"%Y%m%d"`;chomp($$d);while(<>){s/\<\!\-\- VERSION \-\-\>/$(VERSION)-$$d/; print;}' > \
+	$(SOURCE)/loncom/license/about.html.new
+	mv -v $(SOURCE)/loncom/license/about.html.new \
+	$(SOURCE)/loncom/license/about.html
+	cat $(SOURCE)/loncom/loncapa_apache.conf | \
+	perl -e '$$d=`date +"%Y%m%d"`;chomp($$d);while(<>){s/\<\!\-\- VERSION \-\-\>/$(VERSION)-$$d/; print;}' > \
+	$(SOURCE)/loncom/loncapa_apache.conf.new
+	mv -v $(SOURCE)/loncom/loncapa_apache.conf.new \
+	$(SOURCE)/loncom/loncapa_apache.conf
+
+# ========= *** Makefile.* TARGETS BUILT DYNAMICALLY FROM loncapafiles.lpml ***
+
+Makefile.configinstall: $(SOURCE)/doc/loncapafiles/loncapafiles.lpml \
+                        lpml_parse.pl
+	cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
+	perl lpml_parse.pl configinstall $(CATEGORY) $(DIST) "$(SOURCE)" \
+	"$(TARGET)" > Makefile.configinstall
+
+Makefile.build: $(SOURCE)/doc/loncapafiles/loncapafiles.lpml lpml_parse.pl
+	cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
+	perl lpml_parse.pl build $(CATEGORY) $(DIST) "$(SOURCE)" "$(TARGET)" \
+	> Makefile.build
+
+Makefile.install: alwaysrun
+	cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
+	perl lpml_parse.pl install $(CATEGORY) $(DIST) "$(SOURCE)" \
+	"$(TARGET)" > Makefile.install
+
+# ============= *** TARGETS FOR OPERATING ON FILESYSTEMS ACROSS THE NETWORK ***
+
 lpmladm:
 	@if (test $(METAMTARGET) = "TRANSPORT"); then \
 		echo "Transporting to $(HOSTNAME)"; \
@@ -132,6 +488,95 @@ lpmladm:
 		echo "**** ERROR **** Incorrect METAMTARGET"; \
 	fi
 
+NET_hosts_and_domain_tab:
+	make TIMESTAMP=`date +"%s"` METAMTARGET="TRANSPORT" \
+	MTARGET="hosts_and_domain_tab" HOSTNAME="$(HOSTNAME)" lpmladm
+
+NET_webserverconf:
+	make TIMESTAMP=`date +"%s"` METAMTARGET="LAUNCH" \
+	MTARGET="webserverconf" HOSTNAME="$(HOSTNAME)" lpmladm
+
+NET_rawinstall:
+	make TIMESTAMP=`date +"%s"` METAMTARGET="TRANSPORT" \
+	MTARGET="rawinstall" HOSTNAME="$(HOSTNAME)" lpmladm
+
+# ============== *** TARGETS FOR MAKING LISTS (MANIFESTS) OF LON-CAPA FILES ***
+
+MANIFEST_all:
+	# --------------------------------------------------------- start clean
+	rm -f $(SOURCE)/MANIFEST
+	make MANIFEST_lpml
+	make MANIFEST_vanillatar
+	make MANIFEST_cvs
+	# ---------------------------------- might as well include the MANIFEST
+	echo 'MANIFEST' >> $(SOURCE)/MANIFEST
+	# ------------------------------------------ hosts.tab are belong to us
+	echo 'loncom/rawhide_hosts.tab' >> $(SOURCE)/MANIFEST
+	echo 'loncom/production_hosts.tab' >> $(SOURCE)/MANIFEST
+	echo 'loncom/development_hosts.tab' >> $(SOURCE)/MANIFEST
+	echo 'loncom/production_domain.tab' >> $(SOURCE)/MANIFEST
+	echo 'loncom/development_domain.tab' >> $(SOURCE)/MANIFEST
+	# ------------------ Files needed for dynamically generated directories
+	echo 'doc/man' >> $(SOURCE)/MANIFEST
+	echo 'doc/lib' >> $(SOURCE)/MANIFEST
+	echo 'doc/lib/perl' >> $(SOURCE)/MANIFEST
+	echo 'doc/lib/perl/Apache' >> $(SOURCE)/MANIFEST
+	echo 'doc/scripts' >> $(SOURCE)/MANIFEST
+	# --------------------------------------------------- Clean up MANIFEST
+	cd $(SOURCE); \
+	sort MANIFEST | perl -nle 'print "$(DIRTARGET)/$$_"' | \
+	perl -nle 's/\w+\/\.\.\///g;s/\w+\/\.\.\///g;print' | \
+	perl -nle 's/\w+\/\.\.\///g;s/\w+\/\.\.\///g;print' | \
+	perl -nle 's/\w+\/\.\.\///g;s/\w+\/\.\.\///g;print' | \
+	perl -nle 's/\/\.\//\//g;print' | sort | uniq > \
+	MANIFEST_loncapa
+	cd $(SOURCE); mv -v MANIFEST_loncapa MANIFEST
+
+# --------------- MANIFEST files with important CVS versioning/date information
+MANIFEST_cvs:
+	# ------ CVS/Entries directories to retain 'time-checking' intelligence
+	cd $(SOURCE); find . -type f -name 'Entries' | grep 'CVS/Entries' >> \
+	MANIFEST
+
+# ------------------- MANIFEST the building, testing and standard loncapa files
+MANIFEST_lpml:
+	cat $(SOURCE)/doc/loncapafiles/buildfiles.lpml | \
+	perl lpml_parse.pl MANIFEST development default \
+	'$(SOURCE)' '$(TARGET)' | grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST
+	cat $(SOURCE)/doc/loncapafiles/testfiles.lpml | \
+	perl lpml_parse.pl MANIFEST development default \
+	'$(SOURCE)' '$(TARGET)' | grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST
+	cat $(SOURCE)/doc/loncapafiles/installfiles.lpml | \
+	perl lpml_parse.pl MANIFEST development default \
+	'$(SOURCE)' '$(TARGET)' | grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST
+	cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
+	perl lpml_parse.pl MANIFEST development default \
+	'$(SOURCE)' '$(TARGET)' | grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST
+
+# ------------ Files for top-level (the vanilla layer that the user first sees)
+MANIFEST_vanillatar:
+	echo 'README' >> $(SOURCE)/MANIFEST
+	echo 'UPDATE' >> $(SOURCE)/MANIFEST
+	echo 'TEST' >> $(SOURCE)/MANIFEST
+	echo 'CHECKRPMS' >> $(SOURCE)/MANIFEST
+
+# =============================================== *** STATUS REPORT TARGETS ***
+
+warningnote:
+	@if (test -s WARNINGS); then \
+		W=`grep -c '\*\*\*\* WARNING' WARNINGS`; \
+		E=`grep -c '\*\*\*\* ERROR' WARNINGS`; \
+		N=`grep -c '\*\*\*\* NOTE' WARNINGS`; \
+		echo "--->  $$W WARNINGS ENCOUNTERED!       "; \
+		echo "--->  $$E ERRORS ENCOUNTERED!         "; \
+		echo "--->  $$N NOTES ENCOUNTERED!          "; \
+		echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"; \
+		echo "!!!!  Please read the WARNINGS file !!!!"; \
+		echo "!!!!   to make sure everything is   !!!!"; \
+		echo "!!!!    correct and taken care of   !!!!"; \
+		echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"; \
+	fi
+
 HTML:
 	install -d HTML
 	cp $(SOURCE)/doc/loncapafiles/*.gif HTML
@@ -166,101 +611,14 @@ rpmstatus:
 rpmstatuspost: rpmstatus
 	cp RPMSTATUS/rpmstatus.html /home/httpd/html/lon-status/rpmstatus.html
 
-configinstall: Makefile.configinstall
-	make -f Makefile.configinstall SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
-	configfiles
-	if (test "0" = $(NORESTORECONF)); then \
-	perl loncaparestoreconfigurations suffix .lpmlnew; fi
-
-Makefile.configinstall: $(SOURCE)/doc/loncapafiles/loncapafiles.lpml lpml_parse.pl
-	cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
-	perl lpml_parse.pl configinstall $(CATEGORY) $(DIST) "$(SOURCE)" \
-	"$(TARGET)" > Makefile.configinstall
-
-warningnote:
-	@if (test -s WARNINGS); then \
-		W=`grep -c '\*\*\*\* WARNING' WARNINGS`; \
-		E=`grep -c '\*\*\*\* ERROR' WARNINGS`; \
-		N=`grep -c '\*\*\*\* NOTE' WARNINGS`; \
-		echo "--->  $$W WARNINGS ENCOUNTERED!       "; \
-		echo "--->  $$E ERRORS ENCOUNTERED!         "; \
-		echo "--->  $$N NOTES ENCOUNTERED!          "; \
-		echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"; \
-		echo "!!!!  Please read the WARNINGS file !!!!"; \
-		echo "!!!!   to make sure everything is   !!!!"; \
-		echo "!!!!    correct and taken care of   !!!!"; \
-		echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"; \
-	fi
-
-NET_webserverconf:
-	make TIMESTAMP=`date +"%s"` METAMTARGET="LAUNCH" \
-	MTARGET="webserverconf" HOSTNAME="$(HOSTNAME)" lpmladm
-
-webserverconf:
-	cat $(SOURCE)/doc/loncapafiles/webserver.piml | \
-	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH)
-
-sanitycheck:
-	cat $(SOURCE)/doc/loncapafiles/sanitycheck.piml | \
-	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
-	tee -a WARNINGS
-
-updatequery:
-	cat $(SOURCE)/doc/loncapafiles/updatequery.piml | \
-	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(QUERYLAUNCH) | \
-	tee -a WARNINGS
-
-postinstall:
-	make webserverconf
-	make sanitycheck
-
-install: TEST_hosts_tab Makefile.install Makefile
-	echo -n "" > WARNINGS
-	make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
-	directories
-	make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" files
-	make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" links
-	make SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
-	NORESTORECONF="$(NORESTORECONF)" configinstall
-	make postinstall
-	make warningnote
-	echo "You can run 'make test' to see if your system is ready to go!"
-
-Makefile.install: $(SOURCE)/doc/loncapafiles/loncapafiles.lpml lpml_parse.pl
-	cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
-	perl lpml_parse.pl install $(CATEGORY) $(DIST) "$(SOURCE)" \
-	"$(TARGET)" > Makefile.install
-
-build: Makefile.build pod2html.sh pod2man.sh
-	install -d $(SOURCE)/doc/man
-	install -d $(SOURCE)/doc/scripts
-	install -d $(SOURCE)/doc/lib/perl/Apache
-	echo -n "" > WARNINGS
-	make -f Makefile.build all
-	make warningnote
-
-Makefile.build: $(SOURCE)/doc/loncapafiles/loncapafiles.lpml lpml_parse.pl
-	cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
-	perl lpml_parse.pl build $(CATEGORY) $(DIST) "$(SOURCE)" "$(TARGET)" \
-	> Makefile.build
+# ======================================= *** ALTERNATIVE PACKAGING TARGETS ***
 
 RPM: BinaryRoot base_rpm_file_list
 	cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
 	perl lpml_parse.pl make_rpm $(CATEGORY) $(DIST) $(SOURCE) $(TARGET) \
 	> base_customizerpm.xml
-	cat base_rpm_file_list.txt | perl make_rpm.pl base 3.2 '' '' \
-	BinaryRoot base_customizerpm.xml
-
-setup_RPM:
-	echo "SetupBinaryRoot/etc/passwd" > setup_rpm_file_list.txt
-	echo "SetupBinaryRoot/etc/group" >> setup_rpm_file_list.txt
-	echo "SetupBinaryRoot/etc/hosts.deny" >> setup_rpm_file_list.txt
-	echo "SetupBinaryRoot/home/www" >> setup_rpm_file_list.txt
-	echo "SetupBinaryRoot/etc/pam.d/passwd" >> setup_rpm_file_list.txt
-	echo "SetupBinaryRoot/etc/pam.d/login" >> setup_rpm_file_list.txt
-	perl setup_rpm_binaryroot.pl
-	cat setup_rpm_file_list.txt | perl make_rpm.pl setup 3.2 '' '' \
-	SetupBinaryRoot customizerpm.xml
+	cat base_rpm_file_list.txt | perl make_rpm.pl base $(VERSION) \
+	$(RELEASE) '' '' BinaryRoot base_customizerpm.xml
 
 DPKG:
 	make TARGET='lon-capa-$(VERSION)' NORESTORECONF='1' install
@@ -288,6 +646,8 @@ base_rpm_file_list:
 BinaryRoot: base_rpm_file_list
 	make TARGET='BinaryRoot' NORESTORECONF='1' install
 
+# ======================================== *** MASTER DOCUMENTATION TARGETS ***
+
 # Generates CVS:loncom/build/docs; root location of install.lon-capa.org
 doc:
 	install -d docs
@@ -328,6 +688,10 @@ doc:
 	cd docs/install; ln -fs ../installation_manual.pdf install.pdf
 	perl doc_template.pl $(SOURCE)/doc/templates/template.html \
 		$(SOURCE)/doc/build/install.html > docs/install/index.html
+	cp -v $(SOURCE)/doc/install/redhat7.3/new_install_rh73.html \
+		docs/install/rh73.html
+	cp -v $(SOURCE)/doc/install/redhat7.3/new_install_rh73.html \
+		docs/downloads/rh73.html
 	install -m 0755 -d docs/upgrade
 	cd docs/upgrade; ln -fs ../installation_manual.pdf upgrade.pdf
 	perl doc_template.pl $(SOURCE)/doc/templates/template.html \
@@ -359,7 +723,8 @@ pdfdoc: TEST_html2ps
 #	mpage -P- -1 -H [^C]* > ../../../loncom/build/pdfdoc/confexamples.ps
 	install -d pdfdoc/confexamples
 	cd $(SOURCE)/doc/build/confexamples; \
-	find . -type f | cut -b3- | grep -v '^C' | perl -nle \
+	find . -type f | cut -b3- | grep -v '^C' | grep -v 'keyword' | \
+	perl -nle \
 	'`mpage -P- -1 -H $$_ > ../../../loncom/build/pdfdoc/confexamples/$$_.ps`;'
 	echo '' > pdfdoc/contents.txt
 	echo '' >> pdfdoc/contents.txt
@@ -395,92 +760,39 @@ pdfdoc: TEST_html2ps
 	ps2pdf pdfdoc/installation_manual.ps pdfdoc/installation_manual.pdf
 	mv -vf pdfdoc/installation_manual.pdf .
 
-TEST_html2ps:
-	@if (test -e /usr/local/html2ps/bin/html2ps); then \
-		echo "I can find html2ps; assume okay"; \
-	else \
-	echo "**** ERROR **** cannot find /usr/local/html2ps/bin/html2ps!" && \
-        echo "Please visit http://www.tdb.uu.se/~jan/html2ps.html" && \
-	exit 1; \
-	fi
-
-tardist:
-	# ----------- MANIFEST the building, testing and standard loncapa files
-	cat $(SOURCE)/doc/loncapafiles/buildfiles.lpml | \
-	perl lpml_parse.pl MANIFEST development default \
-	'$(SOURCE)' '$(TARGET)' | grep '[[:alnum:]]' > $(SOURCE)/MANIFEST
-	cat $(SOURCE)/doc/loncapafiles/testfiles.lpml | \
-	perl lpml_parse.pl MANIFEST development default \
-	'$(SOURCE)' '$(TARGET)' | grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST
-	cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
-	perl lpml_parse.pl MANIFEST development default \
-	'$(SOURCE)' '$(TARGET)' | grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST
-	# ------ CVS/Entries directories to retain 'time-checking' intelligence
-	cd $(SOURCE); find . -type f -name 'Entries' | grep 'CVS/Entries' >> \
-	MANIFEST
-	# ---- Files for top-level (the vanilla layer that the user first sees)
-	echo 'README' >> $(SOURCE)/MANIFEST
-	echo 'UPDATE' >> $(SOURCE)/MANIFEST
-	echo 'TEST' >> $(SOURCE)/MANIFEST
-	echo 'CHECKRPMS' >> $(SOURCE)/MANIFEST
-	# ---------------------------------- might as well include the MANIFEST
-	echo 'MANIFEST' >> $(SOURCE)/MANIFEST
-	# ------------------------------------------ hosts.tab are belong to us
-	echo 'loncom/rawhide_hosts.tab' >> $(SOURCE)/MANIFEST
-	echo 'loncom/production_hosts.tab' >> $(SOURCE)/MANIFEST
-	echo 'loncom/development_hosts.tab' >> $(SOURCE)/MANIFEST
-	# ------------------ Files needed for dynamically generated directories
-	echo 'doc/man' >> $(SOURCE)/MANIFEST
-	echo 'doc/lib' >> $(SOURCE)/MANIFEST
-	echo 'doc/lib/perl' >> $(SOURCE)/MANIFEST
-	echo 'doc/lib/perl/Apache' >> $(SOURCE)/MANIFEST
-	echo 'doc/scripts' >> $(SOURCE)/MANIFEST
-	# --------------------------- Point UPDATE to the internal make process
-	echo '#!/bin/sh' > $(SOURCE)/UPDATE
-	echo 'touch loncom/build/WARNINGS' >> $(SOURCE)/UPDATE;
-	echo 'ln -s loncom/build/WARNINGS WARNINGS' >> $(SOURCE)/UPDATE;
-	echo 'cd loncom/build; make build; make install' >> $(SOURCE)/UPDATE
-	echo 'make updatequery' >> $(SOURCE)/UPDATE
-	# ----------------------------- Point TEST to the internal make process
-	echo '#!/bin/sh' > $(SOURCE)/TEST
-	echo 'cd loncom/build; make test' >> $(SOURCE)/TEST
-	# ----------------------------- Copy CHECKRPMS to the vanilla top-level
-	cp $(SOURCE)/loncom/build/CHECKRPMS $(SOURCE)/CHECKRPMS
-	# ----------------------- vanilla executables must indeed be executable
-	chmod a+rx $(SOURCE)/UPDATE
-	chmod a+rx $(SOURCE)/TEST
-	chmod a+rx $(SOURCE)/CHECKRPMS
-	# -------------------------------- Copy README to the vanilla top-level
-	cp $(SOURCE)/doc/shortest_path_redhat7.2.txt $(SOURCE)/README
-	# --------------------------------------------------- Clean up MANIFEST
-	cd $(SOURCE); \
-	sort MANIFEST | perl -nle 'print "$(DIRTARGET)/$$_"' | \
-	perl -nle 's/\w+\/\.\.\///g;s/\w+\/\.\.\///g;print' | \
-	perl -nle 's/\w+\/\.\.\///g;s/\w+\/\.\.\///g;print' | \
-	perl -nle 's/\w+\/\.\.\///g;s/\w+\/\.\.\///g;print' | \
-	perl -nle 's/\/\.\//\//g;print' | sort | uniq > \
-	MANIFEST_loncapa
-	# -------------------------------------------------------- Make tardist
-	@cd $(SOURCE); \
-	if (test -h $(DIRTARGET)); then \
-		echo "$(DIRTARGET) link already defined; assume okay"; \
-	else \
-		ln -s . $(DIRTARGET); \
-	fi
-	cd $(SOURCE); \
-	tar --no-recursion --numeric-owner --files-from MANIFEST_loncapa \
-	-h -czf loncapa.tar.gz 2>WARNINGS || [ "0" == "0" ]
-	cat $(SOURCE)/WARNINGS | \
-	xargs --replace=XXX echo '**** WARNING **** XXX' > WARNINGS
-	rm -f $(SOURCE)/WARNINGS
-	make warningnote
+# ================================================ *** KEEPING THINGS CLEAN ***
 
 clean:
+	rm -f buildflag
+	rm -Rf HTML
+	rm -f installation_manual.pdf
+	rm -f Makefile.build
+	rm -f Makefile.install
+	rm -f Makefile.configinstall
+	rm -Rf BinaryRoot
+	rm -Rf SetupBinaryRoot
+	rm -Rf LON-CAPA-base
+	rm -f base_rpm_file_list.txt
+	rm -f base_customizerpm.xml
+	rm -f setup_rpm_file_list.txt
+	rm -f docs.tar.gz
+	rm -Rf docs
+	rm -Rf pdfdoc
+	rm -f program.pl*
+	rm -Rf lpmladm.*
+	rm -f WARNINGS
+	rm -f CPAN_STATUS_REPORT
+	rm -f $(SOURCE)/loncom/build/hosts.tab
+
+reallyclean:
+	rm -f buildflag
 	rm -f $(SOURCE)/README
 	rm -f $(SOURCE)/UPDATE
 	rm -f $(SOURCE)/TEST
 	rm -f $(SOURCE)/MANIFEST
+	rm -f $(SOURCE)/MANIFEST_loncapa
 	rm -f $(SOURCE)/loncapa
+	rm -f $(SOURCE)/loncom/build/hosts.tab
 	rm -f $(SOURCE)/loncapa.tar.gz
 	rm -Rf HTML
 	rm -f installation_manual.pdf
@@ -500,3 +812,39 @@ clean:
 	rm -Rf lpmladm.*
 	make -f Makefile.cvs clean
 	rm -f WARNINGS
+
+uninstall:
+	rm -f UNINSTALL_SHELL_COMMANDS
+	cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
+	perl lpml_parse.pl uninstall_shell_commands $(CATEGORY) $(DIST) \
+	"$(SOURCE)" "$(TARGET)" > UNINSTALL_SHELL_COMMANDS
+	@echo -n "**** NOTE **** A file \"UNINSTALL_SHELL_COMMANDS\" has been "
+	@echo "generated."
+	@echo "First, you should view the contents of this file."
+	@echo "If you are happy with the 'rm -Rf'! commands (or at least"
+	@echo "have another job lined up in case of catastrophe), then you "
+	@echo "can execute the following: sh ./UNINSTALL_SHELL_COMMANDS"
+
+backup:
+	@echo "Not yet implemented"
+
+restore:
+	@echo "Not yet implemented"
+
+# ===================================================== *** AUXILIARY TESTS ***
+localauth:
+	@if (test -e $(LOCALAUTHPATH)/localauth.pm) && \
+             !(diff $(LOCALAUTHPATH)/localauth-std.pm \
+              $(LOCALAUTHPATH)/localauth.pm > /dev/null); then \
+		echo "**** WARNING **** $(LOCALAUTHPATH)/localauth.pm is different than the $(LOCALAUTHPATH)/localauth-std.pm; if you have not customized localauth.pm, then please manually overwrite localauth.pm (rm $(LOCALAUTHPATH)/localauth.pm; ln -s $(LOCALAUTHPATH)/localauth-std.pm $(LOCALAUTHPATH)/localauth.pm); if you have customized localauth.pm, then please double-check to see that your customized localauth.pm is compatible with any localauth-std.pm changes for this version of LON-CAPA"| tee -a WARNINGS; \
+	elif (test -e $(LOCALAUTHPATH)/localauth.pm) && \
+              (diff $(LOCALAUTHPATH)/localauth-std.pm \
+              $(LOCALAUTHPATH)/localauth.pm > /dev/null); then \
+		echo "**** NOTE **** LOCAL AUTH IS IDENTICAL WITH STANDARD TEMPLATE"| tee -a WARNINGS; \
+	elif !(test -e $(LOCALAUTHPATH)/localauth.pm) && \
+	      (test -e $(LOCALAUTHPATH)/localauth-std.pm); then \
+		ln -s $(LOCALAUTHPATH)/localauth-std.pm $(LOCALAUTHPATH)/localauth.pm; \
+	fi
+
+# ================================================ *** A HELPFUL DEPENDENCY ***
+alwaysrun: