--- loncom/build/Makefile 2003/02/03 18:03:52 1.144 +++ loncom/build/Makefile 2007/11/08 19:58:15 1.184.2.5 @@ -1,6 +1,6 @@ # The LearningOnline Network with CAPA -# $Id: Makefile,v 1.144 2003/02/03 18:03:52 harris41 Exp $ +# $Id: Makefile,v 1.184.2.5 2007/11/08 19:58:15 albertel Exp $ # TYPICAL USAGE of this Makefile is primarily for two targets: # "make build" and "make install". @@ -22,7 +22,7 @@ SAVE=program.pl.$(TIMESTAMP) LAUNCHSAVE=$(OUTSTREAM) $(SAVE) METAMTARGET="" MTARGET="" -VERSION=0.6.1 +VERSION=2.5.3 # The current working definition for "RELEASE" is: changes not in the software, # but in the operating system dependent packaging of the software. Thus, the # generic tarball releases do not need to have a release number specified. @@ -91,8 +91,9 @@ help_TARGETS: @echo " (horizontal testing)" @echo "TEST_web_layer: mimic a login and various vertical actions on " @echo " a LON-CAPA system" - @echo "TEST_hosts_tab: make sure that a loncapa/loncom/hosts.tab" - @echo " file is specified for installation" + @echo "TEST_hosts_and_domain_tab: make sure that a " + @echo " loncapa/loncom/hosts.tab and loncapa/loncom/domain.tab" + @echo " file is specified for installation" @echo "TEST_html2ps: test for the presence of html2ps which is needed" @echo " for making a PDF compilation for pdfdoc" @echo "*** GENERAL TARGETS SUCH AS 'build' AND 'install' ***" @@ -107,7 +108,8 @@ help_TARGETS: @echo "rawinstall: just install files, links and directories without" @echo " any bells or whistles (e.g. double-checking" @echo " configurations, fine-tuning webserver, etc.)" - @echo "hosts_tab: install the hosts.tab to the filesystem" + @echo "hosts_and_domain_tab: install the hosts.tab and domain.tab" + @echo " to the filesystem" @echo "webserverconf: fine-tune the web server configuration;" @echo " make sure the proper 'Include' statements" @echo " are appended to httpd.conf" @@ -117,13 +119,28 @@ help_TARGETS: @echo " system" @echo "sanitycheck: probe for common errors and recommend fixes to" @echo " the user" + @echo "logcleanup: clean spurious logfile entries" + @echo "clean_file_permissions: Remove erroneous keys from the " + @echo " file_permissions.db" + @echo "accesscount_seed: Migrate the access counting mechanism from " + @echo " nohist_reseval.db to nohist_accesscount.db." + @echo "modify_config_files: Perform automatic update of the " + @echo " configuration files for yum and MySQL." + @echo "ntpcheck: test to see if ntp is installed and running." + @echo "html_parser_check: test functionality of HTML::Parser." + @echo "cron_lpmlcheck: remove cron file /etc/cron.d/loncapa.lpml." + @echo "chkconfig: test runlevels of httpd and loncontrol." + @echo "rpmcheck: test to see if rpms known to confict are installed." + @echo "wrap_setuid: put a C wrapper around setuid scripts." @echo "updatequery: solicit the user for machine configuration" @echo " information; to be incorporated during an update" @echo " procedure (via the UPDATE command)" @echo "postinstall: double-check things after installation" @echo "VERSION: tag the filesystem with version information inside" - @echo " /etc/loncapa-release" + @echo " /etc/loncapa-release and" + @echo " /home/httpd/html/lon-status/version.txt" @echo "aboutVERSION: place version information inside about.html" + @echo " and loncapa_apache.conf" @echo "*** Makefile.* TARGETS BUILT DYNAMICALLY FROM loncapafiles.lpml ***" @echo "Makefile.configinstall: generate a Makefile for configuration" @echo " files; built dynamically from" @@ -138,8 +155,9 @@ help_TARGETS: @echo "*** TARGETS FOR OPERATING ON FILESYSTEMS ACROSS THE NETWORK ***" @echo "lpmladm: coordinates username=lpmladm mediated secure shell" @echo " processes; needed for the NET_* targets" - @echo "NET_hosts_tab: install the hosts.tab to a filesystem elsewhere" - @echo " on the network" + @echo "NET_hosts_and_domain_tab: install the hosts.tab and domain.tab" + @echo " to a filesystem elsewhere" + @echo " on the network" @echo "NET_webserverconf: fine-tune the web server configuration on a" @echo " filesystem elsewhere on the network" @echo "NET_rawinstall: launch the rawinstall target on a filesystem" @@ -237,6 +255,20 @@ TEST_hosts_tab: exit 1; \ fi +TEST_domain_tab: + @echo "Testing domain.tab" + @if (test -e ../domain.tab); then \ + echo "there is a defined link or file; assume okay"; \ + else echo "**** ERROR **** domain.tab not defined!" && \ + echo -n "You need to do one of the following within your " && \ + echo "CVS repository (cd loncapa/loncom)" && \ + echo " 1) ln -s production_domain.tab domain.tab" && \ + echo " 2) ln -s development_domain.tab domain.tab" && \ + echo "or 3) ln -s rawhide_domain.tab domain.tab" && \ + echo "(you most likely want option #1, production_domain.tab)" && \ + exit 1; \ + fi + TEST_html2ps: @if (test -e /usr/local/html2ps/bin/html2ps); then \ echo "I can find html2ps; assume okay"; \ @@ -268,7 +300,7 @@ configinstall: Makefile.configinstall if (test "0" = $(NORESTORECONF)); then \ perl loncaparestoreconfigurations suffix .lpmlnew; fi -install: buildflag VERSION TEST_hosts_tab Makefile.install Makefile +install: buildflag VERSION TEST_hosts_tab TEST_domain_tab Makefile.install Makefile echo -n "" > WARNINGS make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" \ directories @@ -278,11 +310,11 @@ install: buildflag VERSION TEST_hosts_ta NORESTORECONF="$(NORESTORECONF)" configinstall make postinstall make warningnote - echo "You can run 'make test' to see if your system is ready to go!" - echo "NOTE THAT YOUR SYSTEM MUST HAVE MYSQL WITH A USER=\"www\" AND" - echo -n "PASSWORD=\"localhostkey\" FOR www\@localhost" - echo -n "(YOU MAY NEED TO REINITIALIZE YOUR MYSQL www\@localhost USER)" - echo -n "Please see http://install.lon-capa.org/ for more information" + @echo "You can now run 'make test' to see if your system is ready to go!" +# @echo "NOTE THAT YOUR SYSTEM MUST HAVE MYSQL WITH A USER=\"www\" AND" +# @echo -n "PASSWORD=\"localhostkey\" FOR www\@localhost" +# @echo -n "(YOU MAY NEED TO REINITIALIZE YOUR MYSQL www\@localhost USER)" +# @echo -n "Please see http://install.lon-capa.org/ for more information" rawinstall: VERSION Makefile.install Makefile echo -n "" > WARNINGS @@ -293,35 +325,26 @@ rawinstall: VERSION Makefile.install Mak make SOURCE="$(SOURCE)" TARGET="$(TARGET)" \ NORESTORECONF="$(NORESTORECONF)" configinstall -hosts_tab: TEST_hosts_tab +hosts_and_domain_tab: TEST_hosts_tab TEST_domain_tab cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \ perl xfml_parse.pl $(SOURCE)/doc/loncapafiles/valid_hosts.xfml | \ perl lpml_parse.pl install $(CATEGORY) $(DIST) "$(SOURCE)" \ "$(TARGET)" > Makefile.install make -f Makefile.install directories make -f Makefile.install files - @echo "If hosts.tab has changed, restart httpd and loncontrol:" + @echo "If hosts.tab or domain.tab has changed, restart httpd and loncontrol:" @echo " /etc/rc.d/init.d/httpd restart" @echo " /etc/rc.d/init.d/loncontrol restart" webserverconf: cat $(SOURCE)/doc/loncapafiles/webserver.piml | \ - perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) + perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \ + tee -a WARNINGS # ---------------- Top-level files such as README, UPDATE, CHECKRPMS, and TEST vanillatar: # --------------------------- Point UPDATE to the internal make process - echo '#!/bin/sh' > $(SOURCE)/UPDATE - echo 'touch loncom/build/WARNINGS' >> $(SOURCE)/UPDATE; - echo 'ln -s loncom/build/WARNINGS WARNINGS' >> $(SOURCE)/UPDATE; - echo 'cd loncom/build; make build' >> $(SOURCE)/UPDATE - echo 'make rawinstall' >> $(SOURCE)/UPDATE - echo 'make configinstall' >> $(SOURCE)/UPDATE - echo 'make updatequery' >> $(SOURCE)/UPDATE - echo 'make hosts_tab' >> $(SOURCE)/UPDATE - echo 'make postinstall' >> $(SOURCE)/UPDATE - echo 'make aboutVERSION' >> $(SOURCE)/UPDATE - echo 'make warningnote' >> $(SOURCE)/UPDATE + cp $(SOURCE)/loncom/UPDATE $(SOURCE)/UPDATE # ----------------------------- Point TEST to the internal make process echo '#!/bin/sh' > $(SOURCE)/TEST echo 'cd loncom/build; make test' >> $(SOURCE)/TEST @@ -333,7 +356,7 @@ vanillatar: chmod a+rx $(SOURCE)/TEST chmod a+rx $(SOURCE)/CHECKRPMS # -------------------------------- Copy README to the vanilla top-level - cp -v $(SOURCE)/doc/shortest_path_redhat7.2.txt $(SOURCE)/README + #cp -v $(SOURCE)/doc/shortest_path_redhat7.2.txt $(SOURCE)/README tardist: make MANIFEST_all @@ -347,31 +370,89 @@ tardist: fi cp -v $(SOURCE)/loncom/license/about.html \ $(SOURCE)/loncom/license/about.html.orig + cp -v $(SOURCE)/loncom/loncapa_apache.conf \ + $(SOURCE)/loncom/loncapa_apache.conf.orig make aboutVERSION cd $(SOURCE); \ tar --no-recursion --numeric-owner --files-from MANIFEST \ -h -czf $(DIRTARGET).tar.gz 2>tar_WARNINGS || [ "0" == "0" ] mv -v $(SOURCE)/loncom/license/about.html.orig \ $(SOURCE)/loncom/license/about.html + mv -v $(SOURCE)/loncom/loncapa_apache.conf.orig \ + $(SOURCE)/loncom/loncapa_apache.conf cat $(SOURCE)/tar_WARNINGS | \ xargs --replace=XXX echo '**** WARNING **** XXX' > WARNINGS rm -f $(SOURCE)/tar_WARNINGS make warningnote +ntpcheck: + cat $(SOURCE)/doc/loncapafiles/ntpcheck.piml | \ + perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \ + tee -a WARNINGS + +html_parser_check: + cat $(SOURCE)/doc/loncapafiles/html_parser_check.piml | \ + perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \ + tee -a WARNINGS + +cron_lpmlcheck: + cat $(SOURCE)/doc/loncapafiles/cron_lpmlcheck.piml | \ + perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \ + tee -a WARNINGS + +chkconfig: + cat $(SOURCE)/doc/loncapafiles/chkconfig.piml | \ + perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \ + tee -a WARNINGS + +rpmcheck: + cat $(SOURCE)/doc/loncapafiles/rpmcheck.piml | \ + perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \ + tee -a WARNINGS + sanitycheck: cat $(SOURCE)/doc/loncapafiles/sanitycheck.piml | \ perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \ tee -a WARNINGS +logcleanup: + cat $(SOURCE)/doc/loncapafiles/logcleanup.piml | \ + perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \ + tee -a WARNINGS + updatequery: cat $(SOURCE)/doc/loncapafiles/updatequery.piml | \ perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(QUERYLAUNCH) +run_searchcat: + cat $(SOURCE)/doc/loncapafiles/run_searchcat.piml | \ + perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(QUERYLAUNCH) + +clean_file_permissions: + cat $(SOURCE)/doc/loncapafiles/clean_file_permissions.piml | \ + perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \ + tee -a WARNINGS + +accesscount_seed: + cat $(SOURCE)/doc/loncapafiles/accesscount_seed.piml | \ + perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \ + tee -a WARNINGS + +modify_config_files: + cat $(SOURCE)/doc/loncapafiles/modify_config_files.piml | \ + perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \ + tee -a WARNINGS + reseval_fixup: cat $(SOURCE)/doc/loncapafiles/reseval_fixup.piml | \ perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \ tee -a WARNINGS +update_queue_slots: + cat $(SOURCE)/doc/loncapafiles/update_queue_slots.piml | \ + perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \ + tee -a WARNINGS + clearoutoldspreadsheetcache: cat $(SOURCE)/doc/loncapafiles/clearoutoldspreadsheetcache.piml | \ perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \ @@ -382,24 +463,54 @@ sendmail_fix: perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \ tee -a WARNINGS +ownership_fix: + cat $(SOURCE)/doc/loncapafiles/ownership_fix.piml | \ + perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \ + tee -a WARNINGS + +wrap_setuid: + cat $(SOURCE)/doc/loncapafiles/wrap_setuid.piml | \ + perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \ + tee -a WARNINGS + postinstall: make webserverconf make reseval_fixup + make clean_file_permissions + make accesscount_seed + make update_queue_slots + make modify_config_files make clearoutoldspreadsheetcache + make chkconfig + make rpmcheck + make ntpcheck + make html_parser_check + make cron_lpmlcheck make sanitycheck + make logcleanup make sendmail_fix + make ownership_fix + make wrap_setuid VERSION: install -d $(TARGET)/etc echo -n "LON-CAPA release $(VERSION)-" > $(TARGET)/etc/loncapa-release date +"%Y%m%d" >> $(TARGET)/etc/loncapa-release + install -d $(TARGET)/home/httpd/html/lon-status + echo -n "$(VERSION)-" > $(TARGET)/home/httpd/html/lon-status/version.txt + date +"%Y%m%d" >> $(TARGET)/home/httpd/html/lon-status/version.txt aboutVERSION: cat $(SOURCE)/loncom/license/about.html | \ - perl -e '$$d=`date +"%Y%m%d"`;chomp($$d);while(<>){s/\<\!\-\- VERSION \-\-\>/$(VERSION)-$$d/; print;}' > \ + perl -e '$$d=`date +"%Y%m%d%H"`;chomp($$d);while(<>){s/\<\!\-\- VERSION \-\-\>/$(VERSION)-$$d/; print;}' > \ $(SOURCE)/loncom/license/about.html.new mv -v $(SOURCE)/loncom/license/about.html.new \ $(SOURCE)/loncom/license/about.html + cat $(SOURCE)/loncom/loncapa_apache.conf | \ + perl -e '$$d=`date +"%Y%m%d%H"`;chomp($$d);while(<>){s/\<\!\-\- VERSION \-\-\>/$(VERSION)-$$d/; print;}' > \ + $(SOURCE)/loncom/loncapa_apache.conf.new + mv -v $(SOURCE)/loncom/loncapa_apache.conf.new \ + $(SOURCE)/loncom/loncapa_apache.conf # ========= *** Makefile.* TARGETS BUILT DYNAMICALLY FROM loncapafiles.lpml *** @@ -451,9 +562,9 @@ lpmladm: echo "**** ERROR **** Incorrect METAMTARGET"; \ fi -NET_hosts_tab: +NET_hosts_and_domain_tab: make TIMESTAMP=`date +"%s"` METAMTARGET="TRANSPORT" \ - MTARGET="hosts_tab" HOSTNAME="$(HOSTNAME)" lpmladm + MTARGET="hosts_and_domain_tab" HOSTNAME="$(HOSTNAME)" lpmladm NET_webserverconf: make TIMESTAMP=`date +"%s"` METAMTARGET="LAUNCH" \ @@ -477,6 +588,12 @@ MANIFEST_all: echo 'loncom/rawhide_hosts.tab' >> $(SOURCE)/MANIFEST echo 'loncom/production_hosts.tab' >> $(SOURCE)/MANIFEST echo 'loncom/development_hosts.tab' >> $(SOURCE)/MANIFEST + echo 'loncom/production_domain.tab' >> $(SOURCE)/MANIFEST + echo 'loncom/development_domain.tab' >> $(SOURCE)/MANIFEST + echo 'loncom/production_dns_hosts.tab' >> $(SOURCE)/MANIFEST + echo 'loncom/development_dns_hosts.tab' >> $(SOURCE)/MANIFEST + echo 'loncom/production_dns_domain.tab' >> $(SOURCE)/MANIFEST + echo 'loncom/development_dns_domain.tab' >> $(SOURCE)/MANIFEST # ------------------ Files needed for dynamically generated directories echo 'doc/man' >> $(SOURCE)/MANIFEST echo 'doc/lib' >> $(SOURCE)/MANIFEST @@ -502,16 +619,16 @@ MANIFEST_cvs: # ------------------- MANIFEST the building, testing and standard loncapa files MANIFEST_lpml: cat $(SOURCE)/doc/loncapafiles/buildfiles.lpml | \ - perl lpml_parse.pl MANIFEST development default \ + perl lpml_parse.pl MANIFEST development $(DIST) \ '$(SOURCE)' '$(TARGET)' | grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST cat $(SOURCE)/doc/loncapafiles/testfiles.lpml | \ - perl lpml_parse.pl MANIFEST development default \ + perl lpml_parse.pl MANIFEST development $(DIST) \ '$(SOURCE)' '$(TARGET)' | grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST cat $(SOURCE)/doc/loncapafiles/installfiles.lpml | \ - perl lpml_parse.pl MANIFEST development default \ + perl lpml_parse.pl MANIFEST development $(DIST) \ '$(SOURCE)' '$(TARGET)' | grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \ - perl lpml_parse.pl MANIFEST development default \ + perl lpml_parse.pl MANIFEST development $(DIST) \ '$(SOURCE)' '$(TARGET)' | grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST # ------------ Files for top-level (the vanilla layer that the user first sees) @@ -609,6 +726,10 @@ BinaryRoot: base_rpm_file_list # ======================================== *** MASTER DOCUMENTATION TARGETS *** +buildwebsite: + cd ../../doc/build; perl ./generate_web_pages.pl + + # Generates CVS:loncom/build/docs; root location of install.lon-capa.org doc: install -d docs