--- loncom/build/make_rpm.pl 2001/01/08 17:57:06 1.7 +++ loncom/build/make_rpm.pl 2002/12/18 17:56:34 1.21 @@ -1,267 +1,306 @@ #!/usr/bin/perl -# Scott Harrison, September 30 -# Automatically generate RPM listing files -# from file listing. - -# GNU General Public License, Version 2, June 1991 -# See http://www.gnu.org/copyleft/gpl.html. - -# This script does actually "build" the RPM. - -# This script also generates and then deletes temporary -# files (and binary root directory tree) to build an RPM with. - -# I still need to implement the CONFIGURATION_FILES and -# DOCUMENTATION_FILES portion of the command line interface to this -# script. - -# Take in a file list (from standard input), -# a description tag and version tag from command line argument -# and temporarily generate a: -# RPM .spec file -# RPM Makefile -# SourceRoot - -# A resulting .rpm file is generated. - -unless (-e "/usr/lib/rpm/rpmrc") { - print < [CONFIGURATION_FILES] [DOCUMENTATION] [PATHPREFIX]\n"; - print "Standard input provides the list of files to work with.\n"; - print "TAG, required descriptive tag. For example, a kerberos software package might be tagged as \"krb4\".\n"; - print "VERSION, required version. Needed to generate version information for the RPM. This should be in the format N.M where N and M are integers.\n"; - print "CONFIGURATION_FILES, optional comma-separated listing of files to be treated as configuration files by RPM (and thus subject to saving during RPM upgrades).\n"; - print "DOCUMENTATION, optional comma-separated listing of files to be treated as documentation files by RPM (and thus subject to being placed in the /usr/doc/RPM-NAME directory during RPM installation).\n"; - print "PATHPREFIX, optional path to be removed from file listing. This is in case you are building an RPM from files elsewhere than root-level. Note, this still depends on a root directory hierarchy after PATHPREFIX.\n"; - exit; -} - -mkdir $tag,0755; -mkdir "$tag/BuildRoot",0755; -mkdir "$tag/SOURCES",0755; -mkdir "$tag/SOURCES/LON-CAPA-$tag-$version",0755; -mkdir "$tag/SPECS",0755; -mkdir "$tag/BUILD",0755; -mkdir "$tag/SRPMS",0755; -mkdir "$tag/RPMS",0755; -mkdir "$tag/RPMS/i386",0755; +my ($tag,$version,$release,$configuration_files,$documentation_files, + $pathprefix,$customize)=@ARGV; +@ARGV=(); # read standard input based on a pipe, not a command-line argument + +# standardize pathprefix argument +$pathprefix=~s/\/$//; # OTHERWISE THE BEGINNING SLASH MIGHT BE REMOVED + +if (!$version) # version should be defined and string length greater than zero + { + print(< | perl make_rpm.pl + [CONFIGURATION_FILES] [DOCUMENTATION_FILES] [PATHPREFIX] + [CUSTOMIZATION_XML] + +Standard input provides the list of files to work with. +TAG, required descriptive tag. For example, a kerberos software +package might be tagged as "krb4". (This value is also used in +the generation of a temporary directory; you cannot have +a pre-existing directory named ./TAG.) +VERSION, required version. Needed to generate version information +for the RPM. It is recommended that this be in the format N.M where N and +M are integers. For example, 0.3, 4.1, and 8.9 are all valid version numbers. +RELEASE, required release number. Needed to generate release information +for the RPM. This is typically an integer, but can also be given descriptive +text such as 'rh7' or 'mandrake8a'. +CONFIGURATION_FILES, optional comma-separated listing of files to +be treated as configuration files by RPM (and thus subject to saving +during RPM upgrades). +DOCUMENTATION_FILES, optional comma-separated listing of files to be +treated as documentation files by RPM (and thus subject to being +placed in the /usr/doc/RPM-NAME directory during RPM installation). +PATHPREFIX, optional path to be removed from file listing. This +is in case you are building an RPM from files elsewhere than +root-level. Note, this still depends on a root directory hierarchy +after PATHPREFIX. +CUSTOMIZATION_XML, allows for customizing various pieces of information such +as vendor, summary, name, copyright, group, autoreqprov, requires, prereq, +description, and pre-installation scripts (see more in the POD, +"perldoc make_rpm.pl"). +END + exit(1); + } + +# ----- Generate temporary directories (subdirs of first command-line argument) + +# Do some error-checking related to important first command-line argument. +if ($tag=~/[^\w-]/) # non-alphanumeric characters cause problems + { + print(<; -close IN; - -open (RPMRC,">$tag/SPECS/rpmrc"); -foreach $line (@lines) { - if ($line=~/^macrofiles/) { - chop $line; - $line.=":./rpmmacros\n"; - } - print RPMRC $line; -} -close RPMRC; +print('Creating stand-alone rpm build environment.'."\n"); +open(IN,'; +close(IN); + +open(RPMRC,">$tag/SPECS/rpmrc"); +foreach my $line (@lines) + { + if ($line=~/^macrofiles/) + { + chomp($line); + $line.=":$currentdir/SPECS/rpmmacros\n"; + } + print(RPMRC $line); + } +close(RPMRC); -open (RPMMACROS,">$tag/SPECS/rpmmacros"); -print RPMMACROS <$tag/SPECS/rpmmacros"); +print(RPMMACROS <$tag/SPECS/LON-CAPA-$tag-$version.spec"); +# ------------------------- Perform variable initializations and customizations -print SPEC <0) + { + print('Reading in XML-formatted customizations from '.$customize."\n"); + open(IN,"<$customize") or + ( + print(`cd $invokingdir; rm -Rf $tag`) and + die('Cannot open customization file "'.$customize.'"'."\n") + ); + my @clines=(); + $cu=join('',@clines); + close(IN); + } + +# tv - temporary variable (if it exists inside the XML document) then use it, +# otherwise don't overwrite existing values of variables +my $tv=''; + +# (Sure. We could use HTML::TokeParser here... but that wouldn't be fun now, +# would it?) +my $name=$tag; +# read in name from customization if available +$tv=grabtag('name',$cu,1); $name=$tv if $tv; +$name=~s/\/$tag/g; + +# (When in doubt, be paranoid about overwriting things.) +if (-e "$name-$version-1.i386.rpm") + { + print(`cd $invokingdir; rm -Rf $tag`); # clean temporary filespace in use + die("**** ERROR **** $name-$version-1.i386.rpm already exists.\n"); + } + +my $requires=''; +# read in relevant requires info from customization file (if applicable) +# note that "PreReq: item" controls order of CD-ROM installation (if you +# are making a customized CD-ROM) +# "Requires: item" just enforces dependencies from the command-line invocation +$tv=grabtag('requires',$cu,1); $requires=$tv if $tv; +# do more require processing here +$requires=~s/\s*\<\/item\>\s*//g; +$requires=~s/\s*\\s*/\n/g; +$requires=~s/^\s+//s; + +my $summary='Files for the '.$name.' software package.'; +# read in summary from customization if available +$tv=grabtag('summary',$cu,1); $summary=$tv if $tv; +$summary=~s/\/$tag/g; + +my $autoreqprov='no'; +# read in autoreqprov from customization if available +$tv=grabtag('autoreqprov',$cu,1); $autoreqprov=$tv if $tv; + +my $copyright="not specified here"; +# read in copyright from customization if available +$tv=grabtag('copyright',$cu,1); $copyright=$tv if $tv; +$copyright=~s/\/$tag/g; + +my $rpmgroup="Utilities/System"; +# read in copyright from customization if available +$tv=grabtag('group',$cu,1); $rpmgroup=$tv if $tv; +$rpmgroup=~s/\/$tag/g; + +my $vendor='Me'; +# read in vendor from customization if available +$tv=grabtag('vendor',$cu,1); $vendor=$tv if $tv; +$vendor=~s/\/$tag/g; + +my $description="$name software package"; +# read in description from customization if available +$tv=grabtag('description',$cu,0); $description=$tv if $tv; +$description=~s/\/$tag/g; + +my $pre=''; +# read in pre-installation script if available +$tv=grabtag('pre',$cu,0); $pre=$tv if $tv; +$pre=~s/\/$tag/g; + +# ------------------------------------- Print header information for .spec file +print('Print header information for .spec file'."\n"); + +open(SPEC,">$tag/SPECS/$name-$version.spec"); +print(SPEC <) { - chop $file; +# ------------------------------------ Process file list and gather information +print('Process standard input file list and gather information.'."\n"); + +my %BinaryRootMakefile; +my %Makefile; +my %dotspecfile; + +foreach my $file (<>) + { + chomp($file); my $comment=""; - if ($file=~/\s+\#(.*)$/) { + if ($file=~/\s+\#(.*)$/) + { $file=~s/\s+\#(.*)$//; $comment=$1; - } - my $config=""; - if ($comment=~/config/i) { - $config="\%config "; - } - if (($type,$size,$octalmode,$user,$group)=find_info($file)) { + } + my $directive=""; + if ($comment=~/config\(noreplace\)/) + { + $directive="\%config(noreplace) "; + } + elsif ($comment=~/config/) + { + $directive="\%config "; + } + elsif ($comment=~/doc/) + { + $directive="\%doc"; + } + if (($type,$size,$octalmode,$user,$group)=find_info($file)) + { $octalmode="0" . $octalmode if length($octalmode)<4; - if ($pathprefix) { + if ($pathprefix) + { $file=~s/^$pathprefix//; - } - if ($type eq "files") { - push @{$BinaryRootMakefile{$type}},"\tinstall -D -m $octalmode $pathprefix$file $binaryroot$file\n"; - push @{$Makefile{$type}},"\tinstall -D -m $octalmode \$(SOURCE)$file \$(ROOT)$file\n"; - push @{$dotspecfile{$type}},"$config\%attr($octalmode,$user,$group) $file\n"; - } - elsif ($type eq "directories") { - push @{$BinaryRootMakefile{$type}},"\tinstall -m $octalmode -d $binaryroot$file\n"; - push @{$Makefile{$type}},"\tinstall -m $octalmode -d \$(SOURCE)$file \$(ROOT)$file\n"; - push @{$dotspecfile{$type}},"\%dir \%attr($octalmode,$user,$group) $file\n"; - } - elsif ($type eq "links") { - my $link=$size; # I use the size variable to pass the link value from the subroutine find_info + } + if ($type eq "files") + { + push(@{$BinaryRootMakefile{$type}},"\tinstall -D -m $octalmode ". + "$pathprefix$file $binaryroot$file\n"); + push(@{$Makefile{$type}},"\tinstall -D -m $octalmode ". + "\$(SOURCE)$file \$(ROOT)$file\n"); + push(@{$dotspecfile{$type}},"$directive\%attr($octalmode,$user,". + "$group) $file\n"); + } + elsif ($type eq "directories") + { + push(@{$BinaryRootMakefile{$type}},"\tinstall -m $octalmode -d ". + "$binaryroot$file\n"); + push(@{$Makefile{$type}},"\tinstall -m $octalmode -d ". + "\$(SOURCE)$file \$(ROOT)$file\n"); + push(@{$dotspecfile{$type}},"\%dir \%attr($octalmode,$user,". + "$group) $file\n"); + } + elsif ($type eq "links") + { + my $link=$size; # I use the size variable to pass the link value + # from the subroutine find_info $link=~s/^$pathprefix//; - push @{$BinaryRootMakefile{$type}},"\tln -s $link $binaryroot$file\n"; - push @{$Makefile{$type}},"\tln -s $link \$(ROOT)$file\n"; - push @{$dotspecfile{$type}},"\%attr(-,$user,$group) $file\n"; - } - } -} - -open OUT, ">$tag/SOURCES/LON-CAPA-$tag-$version/Makefile"; -open OUT2, ">$tag/BinaryRootMakefile"; -foreach $type ("directories","files","links") { - print OUT "$type\:\n"; - print OUT join("",@{$Makefile{$type}}); - print OUT "\n"; - print OUT2 "$type\:\n"; - print OUT2 join("",@{$BinaryRootMakefile{$type}}); - print OUT2 "\n"; - print SPEC join("",@{$dotspecfile{$type}}); -} -close OUT2; -close OUT; + push(@{$BinaryRootMakefile{$type}}, + "\tln -s $link $binaryroot$file\n"); + push(@{$Makefile{$type}},"\tln -s $link \$(ROOT)$file\n"); + push(@{$dotspecfile{$type}},"\%attr(-,$user,$group) $file\n"); + } + } + } + +# -------------------------------------- Generate SRPM and BinaryRoot Makefiles +print('Generate SRPM and BinaryRoot Makefiles.'."\n"); + +# Generate a much needed directory. +# This directory is meant to hold all source code information +# necessary for converting .src.rpm files into .i386.rpm files. +mkdir("$tag/SOURCES/$name-$version",0755); + +open(OUTS,">$tag/SOURCES/$name-$version/Makefile"); +open(OUTB, ">$tag/BinaryRootMakefile"); +foreach $type ("directories","files","links") + { + print(OUTS "$type\:\n"); + print(OUTS join("",@{$Makefile{$type}})) if $Makefile{$type}; + print(OUTS "\n"); + print(OUTB "$type\:\n"); + print(OUTB join("",@{$BinaryRootMakefile{$type}})) + if $BinaryRootMakefile{$type}; + print(OUTB "\n"); + print(SPEC join("",@{$dotspecfile{$type}})) if $dotspecfile{$type}; + } +close(OUTB); +close(OUTS); +close(SPEC); -close SPEC; +# ------------------ mirror copy (BinaryRoot) files under a temporary directory +print('Mirror copy (BinaryRoot) files.'."\n"); `make -f $tag/BinaryRootMakefile directories`; `make -f $tag/BinaryRootMakefile files`; `make -f $tag/BinaryRootMakefile links`; -print `cd $currentdir/SOURCES; tar czvf LON-CAPA-$tag-$version.tar.gz LON-CAPA-$tag-$version`; -print `cd $currentdir/SPECS; rpm --rcfile=./rpmrc -ba LON-CAPA-$tag-$version.spec; cd ../RPMS/i386; cp LON-CAPA-$tag-$version-1.i386.rpm $invokingdir/.`; -print `cd $invokingdir; rm -Rf $tag`; - -sub find_info { - # only look for +# ------------------------------------------------- roll everything into an RPM +print('Build a tarball and then run the rpm -ba command.'."\n"); +my $command="cd $currentdir/SOURCES; tar czvf $name-$version.tar.gz ". + "$name-$version"; +print(`$command`); + +# ----------------------------------------- Define commands to be executed. +# command1a works for rpm version <=4.0.2 +# command1b works for rpm version >4.0.4 + +my $arch = 'i386'; + +my $command1a="cd $currentdir/SPECS; rpm --rcfile=./rpmrc --target=$arch -ba ". + "$name-$version.spec"; + +my $rpmcommand = 'rpm'; +if (`rpmbuild --version`) {$rpmcommand = 'rpmbuild';} +my $command1b="cd $currentdir/SPECS; $rpmcommand --rcfile=./rpmrc ". + "-ba --target $arch ". + "$name-$version.spec"; + +# ---------------------------------------------- Run the "rpm -ba" command. +# The strategy here is to...try one approach, and then the other. +print "$command1a\n"; +print (`$command1a`); +if ($?!=0) + { + print(<(.*?)\<\/$tag\>/s; + $value=$1; $value=~s/^\s+//; + if ($clean==1) + { + $value=~s/\n\s/ /g; + $value=~s/\s\n/ /g; + $value=~s/\n/ /g; + $value=~s/\s+$//; + } + return($value); + } + +# ----------------------------------------------------- Plain Old Documentation + +=pod + +=head1 NAME + +make_rpm.pl - cleanly generate an rpm in a simple one-line command + +=head1 SYNOPSIS + +Usage: | make_rpm.pl + [CONFIGURATION_FILES] [DOCUMENTATION_FILES] + [PATHPREFIX] [CUSTOMIZATION_XML] + +=head2 The standard input stream + +I, the standard input stream, provides the list of files to work +with. This list of file names must give the complete filesystem +path starting from '/'. + +=over 4 + +=item * For instance, the following is invalid: + + romeodir/file1.txt # ** INVALID! ** missing leading filesystem path + romeodir/file2.txt + romeodir/file3.txt + +=item * Whereas, the following is valid: + + /home/joe/romeodir/file1.txt + /home/joe/romeodir/file2.txt + /home/joe/romeodir/file3.txt + +=item * In terms of the B command, + + "find romeodir | perl make_rpm.pl [COMMAND-LINE ARGUMENTS]" + +is incorrect, whereas + + "find /home/joe/romeodir |perl make_rpm.pl [COMMAND-LINE ARGUMENTS]" + +or + + "find `pwd`/romeodir |perl make_rpm.pl [COMMAND-LINE ARGUMENTS]" + +is correct. + +=back + +The standard input stream can also +specify configuration files and documentation files through +'#'-style commenting. + +For example, the following file listing encodes some of these directives: + + /home/joe/romeodir/buildloc/etc/romeo/user.conf # config(noreplace) + /home/joe/romeodir/buildloc/etc/romeo/juliet.conf # config + /home/joe/romeodir/buildloc/doc/man/man.1/romeo.1 # doc + /home/joe/romeodir/buildloc/doc/man/man.1/romeo_talks.1 # doc + /home/joe/romeodir/buildloc/usr/local/bin/where_art_thou + /home/joe/romeodir/buildloc/usr/local/bin/romeo_talks + +The I directive controls how files are replaced +and/or backed up when a user attempts to install (B) the F<.rpm> +file generated by B. The I directive controls how a +given file is placed inside special documentation directories +on the filesystem during rpm installation (B). +(If you want to learn more on how the B tool gives configuration and +documentation files special treatment, you should read about "Directives" +in Edward Bailey's well-known "Maximum RPM" book available online +at http://www.rpm.org/max-rpm/s1-rpm-inside-files-list-directives.html.) + +=head2 Description of command-line arguments + +I ($tag), B descriptive tag. For example, a kerberos software +package might be tagged as "krb4". + +I ($version), B version. Needed to generate version +information for the RPM. This should be in the format N.M where N and M are +integers. + +I ($release), B release number. Needed to generate release +information for the RPM. This is typically an integer, but can also be given +descriptive text such as 'rh7' or 'mandrake8a'. + +I, B comma-separated listing of files to +be treated as configuration files by RPM (and thus subject to saving +during RPM upgrades). Configuration files can also be specified in +the standard input stream (as described in L<"The standard input stream">). + +I, B comma-separated listing of files to be +treated as documentation files by RPM (and thus subject to being +placed in the F directory during RPM installation). +Documentation files can also be specified in +the standard input stream (as described in L<"The standard input stream">). + +I, B path to be removed from file listing. This +is in case you are building an RPM from files elsewhere than +root-level. Note, this still depends on a root directory hierarchy +after PATHPREFIX. + +I, B filename where XML-ish information exists. +Allows for customizing various pieces of information such +as vendor, summary, name, copyright, group, autoreqprov, requires, prereq, +description, and pre-installation scripts +(see L<"Customizing descriptive data of your RPM software package">). + +=head2 Examples + + bash$ find /notreallyrootdir | perl make_rpm.pl \ + makemoney 3.1 1 '' \ + '/usr/doc/man/man3/makemoney.3' \ + /notreallyrootdir + would generate makemoney-3.1-1.i386.rpm + + bash$ find /usr/local/bin | \ + perl make_rpm.pl mybinfiles 1.0 2 + would generate mybinfiles-1.0-2.i386.rpm + + bash$ echo '/sycamore33/tree.txt' | \ + perl make_rpm.pl sycamore 1.0 2 '' '' '/sycamore33' + would generate sycamore-1.0-2.i386.rpm + Note that the generated sycamore rpm would install files at the root + '/' directory (not underneath /sycamore33); thus a file named + '/tree.txt' is created, NOT '/sycamore33/tree.txt'. + + bash$ find /home/joe/romeodir/buildloc | \ + perl make_rpm.pl romeo \ + 1.0 3 '' '' '/home/joe/romeodir/buildloc' customize.xml + would generate romeo with customizations from customize.xml. + Note that the generated romeo rpm would install files at the root + '/' directory (not underneath /home/joe/romedir/buildloc). + +The I argument represents a way to customize the +numerous variables associated with RPMs. This argument represents +a file name. (Parsing is done in an unsophisticated fashion using +regular expressions.) See +L<"Customizing descriptive data of your RPM software package">. + +=head1 Customizing descriptive data of your RPM software package + +RPMS can be (and often are) packaged with descriptive data +describing authorship, dependencies, descriptions, etc. + +The following values can be tagged inside an XML file +(specified by the 6th command-line argument) +and made part of the RPM package information +(Bpackage-nameE>). + +=over 4 + +=item * vendor + +=item * summary + +=item * name + +(overrides the argument value; see +L<"Description of command-line arguments>) + +=item * copyright + +=item * group + +(the software package group; +e.g. Applications/System, User Interface/X, Development/Libraries, +etc.) + +=item * requires + +Contains all the dependency information (see the example below). + +=item * description + +=item * pre + +Commands to be executed prior to software package installation. + +=back + +Here is an example (note that B automatically substitutes +any "" string with the first command-line argument described +in L<"Description of command-line arguments">): + + + Laboratory for Instructional Technology Education, Division of + Science and Mathematics Education, Michigan State University. + + Files for the component of LON-CAPA + LON-CAPA- + Michigan State University patents may apply. + Utilities/System + no + + PreReq: setup + PreReq: passwd + PreReq: util-linux + + + PreReq: LON-CAPA-setup + PreReq: apache + PreReq: /etc/httpd/conf/access.conf + + + Requires: LON-CAPA-base + + + This package is automatically generated by the make_rpm.pl perl + script (written by the LON-CAPA development team, www.lon-capa.org, + Scott Harrison). This implements the component for LON-CAPA. + For more on the LON-CAPA project, visit http://www.lon-capa.org/. + +
+ echo "************************************************************"
+ echo "LON-CAPA  LearningOnline with CAPA"
+ echo "http://www.lon-capa.org/"
+ echo " "
+ echo "Laboratory for Instructional Technology Education"
+ echo "Michigan State University"
+ echo " "
+ echo "** Michigan State University patents may apply **"
+ echo " "
+ echo "This installation assumes an installation of Redhat 6.2"
+ echo " "
+ echo "The files in this package are for the  component."
+ echo "***********************************************************"
+ 
+ +=head1 DESCRIPTION + +Automatically generate an RPM software package from a list of files. + +B builds the RPM in a very clean and configurable fashion. +(Finally! Making RPMs outside of F without a zillion +file intermediates left over!) + +B generates and then deletes temporary +files needed to build an RPM with. +It works cleanly and independently from pre-existing +directory trees such as F. + +Input to the script is simple. B accepts five kinds of +information, three of which are mandatory: + +=over 4 + +=item * + +(required) a list of files that are to be part of the software package; + +=item * + +(required) the absolute filesystem location of these files +(see L<"The standard input stream">); + +=item * + +(required) a descriptive tag, version tag, and release tag for the naming of +the RPM software package; + +=item * + +(optional) documentation and configuration files; + +=item * + +and (optional) an XML file that defines the additional metadata +associated with the RPM software package. + +=back + +A temporary directory named $tag (first argument described in +L<"Description of command-line arguments">) is + +=over 4 + +=item * + +generated under the directory from which you run B. + +For example, user "joe" running + + cat file_list.txt | make_rpm.pl krb4 1.0 1 + +would temporarily generate F. + +=item * + +F is deleted after the *.rpm +file is generated. + +=back + +The RPM will typically be named $name-$version.i386.rpm +where $name=$tag. (The $name can be overridden in the customization +XML file; see +L<"Customizing descriptive data of your RPM software package">.) + +Here are some of the items are generated inside +the $tag directory during the construction of an RPM: + +=over 4 + +=item * + +RPM .spec file (F<./$tag/SPECS/$name-$version.spec>) + +=item * + +RPM Makefile (F<./$tag/SOURCES/$name-$version/Makefile>) + +This is the Makefile that is called by the rpm +command in building the .i386.rpm from the .src.rpm. +The following directories are generated and/or used: + +=over 4 + +=item * + +SOURCE directory: F<./$tag/BinaryRoot/> + +=item * + +TARGET directory: F<./$tag/BuildRoot/> + +=back + +=item * + +BinaryRootMakefile (F<./$tag/BinaryRootMakefile>) + +This is the Makefile that this script creates and calls +to build the F<$tag/BinaryRoot/> directory from the existing +filesystem. +The following directories are generated and/or used: + +=over 4 + +=item * + +SOURCE directory: / (your entire filesystem) + +=item * + +TARGET directory: F<./$tag/BinaryRoot/> + +=back + +=back + +The final output of B is a binary F<.rpm> file. +The F<./tag> directory is deleted (along with the F<.src.rpm> +file). The typical file name generated by B is +F<$tag-$version.i386.rpm>. + +B is compatible with either rpm version 3.* or rpm version 4.*. + +=head1 README + +Automatically generate an RPM software package from a list of files. + +B builds the RPM in a very clean and configurable fashion. +(Making RPMs "the simple way" in a one-line command.) + +B generates and then deletes temporary +files (and binary root directory tree) to build an RPM with. +It is designed to work cleanly and independently from pre-existing +directory trees such as /usr/src/redhat/*. + +=head1 PREREQUISITES + +This script requires the C module. + +=head1 AUTHOR + + Scott Harrison + harris41@msu.edu + +Please let me know how/if you are finding this script useful and +any/all suggestions. -Scott + +=head1 LICENSE + +Written by Scott Harrison, harris41@msu.edu + +Copyright Michigan State University Board of Trustees + +This file is part of the LearningOnline Network with CAPA (LON-CAPA). + +This is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This file is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +The GNU Public License is available for review at +http://www.gnu.org/copyleft/gpl.html. + +For information on the LON-CAPA project, please visit +http://www.lon-capa.org/. + +=head1 OSNAMES + +Linux + +=head1 SCRIPT CATEGORIES + +UNIX/System_administration + +=cut -}