--- loncom/interface/lonpreferences.pm 2004/03/26 17:11:37 1.39
+++ loncom/interface/lonpreferences.pm 2009/05/06 16:19:34 1.159
@@ -1,7 +1,7 @@
# The LearningOnline Network
# Preferences
#
-# $Id: lonpreferences.pm,v 1.39 2004/03/26 17:11:37 www Exp $
+# $Id: lonpreferences.pm,v 1.159 2009/05/06 16:19:34 bisitz Exp $
#
# Copyright Michigan State University Board of Trustees
#
@@ -25,8 +25,6 @@
#
# http://www.lon-capa.org/
#
-# 2/13/02 2/14 2/15 Matthew Hall
-#
# This package uses the "londes.js" javascript code.
#
# TODOs that have to be completed:
@@ -35,6 +33,7 @@
package Apache::lonpreferences;
use strict;
+use LONCAPA;
use Apache::Constants qw(:common);
use Apache::File;
use Crypt::DES;
@@ -42,6 +41,8 @@ use DynaLoader; # for Crypt::DES version
use Apache::loncommon();
use Apache::lonhtmlcommon();
use Apache::lonlocal;
+use Apache::lonnet;
+use LONCAPA();
#
# Write lonnet::passwd to do the call below.
@@ -94,10 +95,64 @@ sub des_decrypt {
################################################################
# Language Change Subroutines #
################################################################
+
+sub wysiwygchanger {
+ my $r = shift;
+ Apache::lonhtmlcommon::add_breadcrumb(
+ { href => '/adm/preferences?action=changewysiwyg',
+ text => 'Change WYSIWYG Preferences'});
+ $r->print(Apache::loncommon::start_page('Content Display Settings'));
+ $r->print(Apache::lonhtmlcommon::breadcrumbs('Change WYSIWYG Preferences'));
+
+ my %userenv = &Apache::lonnet::get
+ ('environment',['wysiwygeditor']);
+ my $onselect='checked="checked"';
+ my $offselect='';
+ if ($userenv{'wysiwygeditor'} eq 'on') {
+ $onselect='';
+ $offselect='checked="checked"';
+ }
+ my $switchoff=&mt('Disable WYSIWYG editor');
+ my $switchon=&mt('Enable WYSIWYG editor');
+ my $warning='';
+ if ($env{'user.adv'}) {
+ $warning.="
".&mt("The WYSIWYG editor only supports simple HTML and is in many cases unsuited for advanced authoring. In a number of cases, it may destroy advanced authoring involving LaTeX and script function calls.")."
";
+ }
+ $r->print(<
+
+$warning
+
+
+
+ENDLSCREEN
+ $r->print(' ');
+}
+
+
+sub verify_and_change_wysiwyg {
+ my $r = shift;
+ my $newsetting=$env{'form.wysiwyg'};
+ &Apache::lonnet::put('environment',{'wysiwygeditor' => $newsetting});
+ &Apache::lonnet::appenv({'environment.wysiwygeditor' => $newsetting});
+ my $message=&Apache::lonhtmlcommon::confirm_success(&mt('Set [_1] to [_2]',''.&mt('WYSIWYG Editor').'',''.&mt($newsetting).''));
+ $message=&Apache::loncommon::confirmwrapper($message);
+ &print_main_menu($r,$message);
+}
+
+################################################################
+# Language Change Subroutines #
+################################################################
sub languagechanger {
my $r = shift;
- my $user = $ENV{'user.name'};
- my $domain = $ENV{'user.domain'};
+
+ Apache::lonhtmlcommon::add_breadcrumb(
+ { href => '/adm/preferences?action=changelanguages',
+ text => 'Change Language'});
+ $r->print(Apache::loncommon::start_page('Content Display Settings'));
+ $r->print(Apache::lonhtmlcommon::breadcrumbs('Change Language'));
+ my $user = $env{'user.name'};
+ my $domain = $env{'user.domain'};
my %userenv = &Apache::lonnet::get
('environment',['languages']);
my $language=$userenv{'languages'};
@@ -113,186 +168,915 @@ sub languagechanger {
my $selectionbox=&Apache::loncommon::select_form($language,'language',
%langchoices);
$r->print(<
+
-ENDSCREEN
+ Apache::lonhtmlcommon::add_breadcrumb(
+ { href => '/adm/preferences?action=changescreenname',
+ text => 'Change Screen Name'});
+ $r->print(Apache::loncommon::start_page('Personal Data'));
+ $r->print(Apache::lonhtmlcommon::breadcrumbs('Change Screen Name'));
+ $r->print('
'
+ .&mt('Change the name that is displayed in your posts.')
+ .'
'
+ );
+ $r->print('
'
+ .''
+ .&Apache::lonhtmlcommon::start_pick_box()
+ .&Apache::lonhtmlcommon::row_title(&mt('Screenname').' '.&mt('(shown if you post anonymously)'))
+ .''
+ .&Apache::lonhtmlcommon::row_closure()
+ .&Apache::lonhtmlcommon::row_title(&mt('Nickname').' '.&mt('(shown if you post non-anonymously)'))
+ .''
+ .&Apache::lonhtmlcommon::row_closure()
+ .&Apache::lonhtmlcommon::row_title()
+ .''
+ .&Apache::lonhtmlcommon::row_closure(1)
+ .&Apache::lonhtmlcommon::end_pick_box()
+ .'
'
+ );
}
sub verify_and_change_screenname {
my $r = shift;
- my $user = $ENV{'user.name'};
- my $domain = $ENV{'user.domain'};
+ my $user = $env{'user.name'};
+ my $domain = $env{'user.domain'};
# Screenname
- my $newscreen = $ENV{'form.screenname'};
+ my $newscreen = $env{'form.screenname'};
$newscreen=~s/[^ \w]//g;
my $message='';
if ($newscreen) {
&Apache::lonnet::put('environment',{'screenname' => $newscreen});
- &Apache::lonnet::appenv('environment.screenname' => $newscreen);
- $message='Set new screenname to '.$newscreen;
+ &Apache::lonnet::appenv({'environment.screenname' => $newscreen});
+ $message=&Apache::lonhtmlcommon::confirm_success(&mt('Set [_1] to [_2]',''.&mt('Screenname').'','"'.$newscreen.'."'));
} else {
&Apache::lonnet::del('environment',['screenname']);
- &Apache::lonnet::delenv('environment\.screenname');
- $message='Reset screenname';
+ &Apache::lonnet::delenv('environment.screenname');
+ $message=&Apache::lonhtmlcommon::confirm_success(&mt('Reset [_1]',''.&mt('Screenname').''));
}
# Nickname
$message.=' ';
- $newscreen = $ENV{'form.nickname'};
+ $newscreen = $env{'form.nickname'};
$newscreen=~s/[^ \w]//g;
if ($newscreen) {
&Apache::lonnet::put('environment',{'nickname' => $newscreen});
- &Apache::lonnet::appenv('environment.nickname' => $newscreen);
- $message.='Set new nickname to '.$newscreen;
+ &Apache::lonnet::appenv({'environment.nickname' => $newscreen});
+ $message.=&Apache::lonhtmlcommon::confirm_success(&mt('Set [_1] to [_2]',''.&mt('Nickname').'','"'.$newscreen.'".'));
} else {
&Apache::lonnet::del('environment',['nickname']);
- &Apache::lonnet::delenv('environment\.nickname');
- $message.='Reset nickname';
+ &Apache::lonnet::delenv('environment.nickname');
+ $message.=&Apache::lonhtmlcommon::confirm_success(&mt('Reset [_1]',''.&mt('Nickname').''));
}
+ &Apache::lonnet::devalidate_cache_new('namescache',$user.':'.$domain);
+ $message=&Apache::loncommon::confirmwrapper($message);
+ &print_main_menu($r, $message);
+}
- $r->print(<
-$message
-ENDVCSCREEN
+################################################################
+# Icon Subroutines #
+################################################################
+sub iconchanger {
+ my $r = shift;
+ &Apache::lonhtmlcommon::add_breadcrumb(
+ { href => '/adm/preferences?action=changeicons',
+ text => 'Change Main Menu'});
+ $r->print(Apache::loncommon::start_page('Page Display Settings'));
+ $r->print(Apache::lonhtmlcommon::breadcrumbs('Change Main Menu'));
+
+ my $user = $env{'user.name'};
+ my $domain = $env{'user.domain'};
+ my %userenv = &Apache::lonnet::get
+ ('environment',['icons']);
+ my $iconic='checked="checked"';
+ my $classic='';
+ my $onlyicon='';
+ if ($userenv{'icons'} eq 'classic') {
+ $classic='checked="checked"';
+ $iconic='';
+ }
+ if ($userenv{'icons'} eq 'iconsonly') {
+ $onlyicon='checked="checked"';
+ $iconic='';
+ }
+ my $useicons=&mt('Use icons and text');
+ my $usebuttons=&mt('Use buttons and text');
+ my $useicononly=&mt('Use icons only');
+ my $change=&mt('Save');
+ $r->print(<
+
+
+
+
+
+
+ENDSCREEN
+}
+
+sub verify_and_change_icons {
+ my $r = shift;
+ my $user = $env{'user.name'};
+ my $domain = $env{'user.domain'};
+ my $newicons = $env{'form.menumode'};
+
+ &Apache::lonnet::put('environment',{'icons' => $newicons});
+ &Apache::lonnet::appenv({'environment.icons' => $newicons});
+ my $message=&Apache::lonhtmlcommon::confirm_success(&mt('Set [_1] to [_2]',''.&mt('Menu Display').'',''.$newicons.''));
+ $message=&Apache::loncommon::confirmwrapper($message);
+ &print_main_menu($r, $message);
+}
+
+################################################################
+# Clicker Subroutines #
+################################################################
+
+sub clickerchanger {
+ my $r = shift;
+ &Apache::lonhtmlcommon::add_breadcrumb(
+ { href => '/adm/preferences?action=changeclicker',
+ text => 'Register Clicker'});
+ $r->print(Apache::loncommon::start_page('Other'));
+ $r->print(Apache::lonhtmlcommon::breadcrumbs('Register Clicker'));
+ my $user = $env{'user.name'};
+ my $domain = $env{'user.domain'};
+ my %userenv = &Apache::lonnet::get
+ ('environment',['clickers']);
+ my $clickers=$userenv{'clickers'};
+ $clickers=~s/\,/\n/gs;
+ my $text=&mt('Enter response device ("clicker") numbers');
+ my $change=&mt('Save');
+ my $helplink=&Apache::loncommon::help_open_topic('Clicker_Registration',&mt('Locating your clicker ID'));
+ $r->print(<
+
+
+
+
+
+ENDSCREEN
+}
+
+sub verify_and_change_clicker {
+ my $r = shift;
+ my $user = $env{'user.name'};
+ my $domain = $env{'user.domain'};
+ my $newclickers = $env{'form.clickers'};
+ $newclickers=~s/[^\w\:\-]+/\,/gs;
+ $newclickers=~tr/a-z/A-Z/;
+ $newclickers=~s/[\:\-]+/\-/g;
+ $newclickers=~s/\,+/\,/g;
+ $newclickers=~s/^\,//;
+ $newclickers=~s/\,$//;
+ &Apache::lonnet::put('environment',{'clickers' => $newclickers});
+ &Apache::lonnet::appenv({'environment.clickers' => $newclickers});
+ my $message=&Apache::lonhtmlcommon::confirm_success(&mt('Registering clickers: [_1]',$newclickers));
+ $message=&Apache::loncommon::confirmwrapper($message);
+ &print_main_menu($r, $message);
}
################################################################
+# Domcoord Access Subroutines #
+################################################################
+
+sub domcoordchanger {
+ my $r = shift;
+ &Apache::lonhtmlcommon::add_breadcrumb(
+ { href => '/adm/preferences?action=changedomcoord',
+ text => 'Restrict Domain Coordinator Access'});
+ $r->print(Apache::loncommon::start_page('Restrict Domain Coordinator Access'));
+ $r->print(Apache::lonhtmlcommon::breadcrumbs('Restrict Domain Coordinator Access'));
+ my $user = $env{'user.name'};
+ my $domain = $env{'user.domain'};
+ my %userenv = &Apache::lonnet::get
+ ('environment',['domcoord.author']);
+ my $constchecked='';
+ if ($userenv{'domcoord.author'} eq 'blocked') {
+ $constchecked=' checked="checked"';
+ }
+ my $text=&mt('By default, the Domain Coordinator can enter your construction space.');
+ my $construction=&mt('Block access to construction space');
+ my $change=&mt('Save');
+ $r->print(<
+
+$text
+
+
+
+ENDSCREEN
+}
+
+sub verify_and_change_domcoord {
+ my $r = shift;
+ my $user = $env{'user.name'};
+ my $domain = $env{'user.domain'};
+ my %domcoord=('domcoord.author' => '');
+ if ($env{'form.construction'}) { $domcoord{'domcoord.author'}='blocked'; }
+ &Apache::lonnet::put('environment',\%domcoord);
+ &Apache::lonnet::appenv({'environment.domcoord.author' => $domcoord{'domcoord.author'}});
+ my $status='';
+ if ($domcoord{'domcoord.author'} eq 'blocked') {
+ $status=&mt('on');
+ } else {
+ $status=&mt('off');
+ }
+ my $message=&Apache::lonhtmlcommon::confirm_success(&mt('Set [_1] to [_2]',''.&mt('Block access to construction space').'',''.$status.''));
+ $message=&Apache::loncommon::confirmwrapper($message);
+ &print_main_menu($r,$message);
+}
+
+#################################################################
+## Lock Subroutines #
+#################################################################
+
+sub lockwarning {
+ my $r = shift;
+ my $title=&mt('Action locked');
+ my $texttop=&mt('LON-CAPA is currently performing the following actions:');
+ my $textbottom=&mt('Changing roles or logging out may result in data corruption.');
+ my ($num,%which)=&Apache::lonnet::get_locks();
+ my $which='';
+ foreach my $id (keys %which) {
+ $which.='
'.$which{$id}.'
';
+ }
+ my $change=&mt('Override');
+ $r->print(<
+
+
$title
+$texttop
+
+$which
+
+$textbottom
+
+
+ENDSCREEN
+}
+
+sub verify_and_change_lockwarning {
+ my $r = shift;
+ &Apache::lonnet::remove_all_locks();
+ $r->print(&mt('Cleared locks.'));
+}
+
+
+################################################################
# Message Forward #
################################################################
sub msgforwardchanger {
- my $r = shift;
- my $user = $ENV{'user.name'};
- my $domain = $ENV{'user.domain'};
- my %userenv = &Apache::lonnet::get('environment',['msgforward','notification','critnotification']);
+ my ($r,$message) = @_;
+ my $user = $env{'user.name'};
+ my $domain = $env{'user.domain'};
+ my %userenv = &Apache::lonnet::get('environment',['msgforward','notification','critnotification','notifywithhtml']);
my $msgforward=$userenv{'msgforward'};
- my $notification=$userenv{'notification'};
- my $critnotification=$userenv{'critnotification'};
- my $forwardingHelp = Apache::loncommon::help_open_topic("Prefs_Forwarding",
- "What are forwarding ".
- "and notification ".
- "addresses");
- my $criticalMessageHelp = Apache::loncommon::help_open_topic("Course_Critical_Message",
- "What are critical messages");
+ my %lt = &Apache::lonlocal::texthash(
+ all => 'All',
+ crit => 'Critical only',
+ reg => 'Non-critical only',
+ foad => 'Forwarding Address(es)',
+ noti => 'Notification E-mail Address(es)',
+ foad_exmpl => 'e.g. userA:domain1,userB:domain2,...',
+ mnot => 'E-mail Address(es) which should be notified about new LON-CAPA messages',
+ # old: 'Message Notification Email Address(es)',
+ mnot_exmpl => 'e.g. joe@doe.com',
+ chg => 'Save',
+ email => 'The e-mail address entered in row ',
+ notv => 'is not a valid e-mail address',
+ toen => "To enter multiple addresses, enter one address at a time, click 'Change' and then add the next one",
+ prme => 'Back',
+ );
+ Apache::lonhtmlcommon::add_breadcrumb(
+ { href => '/adm/preferences?action=changemsgforward',
+ text => 'Change Message Forwarding/Notification'});
+ $r->print(Apache::loncommon::start_page('Message Management'));
+ $r->print(Apache::lonhtmlcommon::breadcrumbs('Change Message Forwarding/Notification'));
+ my $forwardingHelp = &Apache::loncommon::help_open_topic("Prefs_Forwarding");
+ my $notificationHelp = &Apache::loncommon::help_open_topic("Prefs_Notification");
+ my $criticalMessageHelp = &Apache::loncommon::help_open_topic("Course_Critical_Message");
+ my @allow_html = split(/,/,$userenv{'notifywithhtml'});
+ my %allnot = &get_notifications(\%userenv);
+ my $validatescript = &Apache::lonhtmlcommon::javascript_valid_email();
+ my $jscript = qq|
+
+|;
$r->print(<
-
",
+ $caller,$mailtoken);
+ return 1;
+ }
+ } else {
+ $user = $env{'user.name'};
+ $domain = $env{'user.domain'};
+ $homeserver = $env{'user.home'};
+ }
my $currentauth=&Apache::lonnet::queryauthenticate($user,$domain);
# Check for authentication types that allow changing of the password.
- return if ($currentauth !~ /^(unix|internal):/);
- #
- $r->print(<
-
-LON-CAPA Preferences: Change password for $user
-
-ENDHEADER
+ if ($currentauth !~ /^(unix|internal):/) {
+ if ($caller eq 'reset_by_email') {
+ &passwordchanger($r,"
\n".
+ &mt("Authentication type for this user can not be changed by this mechanism").
+ "\n
",
+ $caller,$mailtoken);
+ return 1;
+ } else {
+ return;
+ }
+ }
#
- my $currentpass = $ENV{'form.currentpass'};
- my $newpass1 = $ENV{'form.newpass_1'};
- my $newpass2 = $ENV{'form.newpass_2'};
- my $logtoken = $ENV{'form.logtoken'};
+ my $currentpass = $env{'form.currentpass'};
+ my $newpass1 = $env{'form.newpass_1'};
+ my $newpass2 = $env{'form.newpass_2'};
+ my $logtoken = $env{'form.logtoken'};
# Check for empty data
unless (defined($currentpass) &&
defined($newpass1) &&
defined($newpass2) ){
- &passwordchanger($r,"
\nERROR".
- "Password data was blank.\n
");
+ &passwordchanger($r,"
\n".
+ &mt("One or more password fields were blank").
+ "\n
",$caller,$mailtoken);
return;
}
# Get the keys
@@ -562,34 +1484,55 @@ ENDHEADER
my $tmpinfo = Apache::lonnet::reply('tmpget:'.$logtoken,$lonhost);
if (($tmpinfo=~/^error/) || ($tmpinfo eq 'con_lost')) {
# I do not a have a better idea about how to handle this
+ my $tryagain_text = &mt('Please log out and try again.');
+ if ($caller eq 'reset_by_email') {
+ $tryagain_text = &mt('Please try again later.');
+ }
+ my $unable=&mt("Unable to retrieve saved token for password decryption");
$r->print(<
-ERROR: Unable to retrieve stored token for
-password decryption. Please log out and try again.
+$unable. $tryagain_text
ENDERROR
# Probably should log an error here
- return;
+ return 1;
}
my ($ckey,$n1key,$n2key)=split(/&/,$tmpinfo);
#
$currentpass = &des_decrypt($ckey ,$currentpass);
$newpass1 = &des_decrypt($n1key,$newpass1);
$newpass2 = &des_decrypt($n2key,$newpass2);
- #
+ #
+ if ($caller eq 'reset_by_email') {
+ my %data = &Apache::lonnet::tmpget($mailtoken);
+ if (keys(%data) == 0) {
+ &passwordchanger($r,
+ ''.
+ &mt('Could not verify current authentication.').' '.
+ &mt('Please try again.').'',$caller,$mailtoken);
+ return 1;
+ }
+ if ($currentpass ne $data{'temppasswd'}) {
+ &passwordchanger($r,
+ ''.
+ &mt('Could not verify current authentication.').' '.
+ &mt('Please try again.').'',$caller,$mailtoken);
+ return 1;
+ }
+ }
if ($newpass1 ne $newpass2) {
&passwordchanger($r,
- 'ERROR:'.
- 'The new passwords you entered do not match. '.
- 'Please try again.');
- return;
+ ''.
+ &mt('The new passwords you entered do not match.').' '.
+ &mt('Please try again.').'',$caller,$mailtoken);
+ return 1;
}
if (length($newpass1) < 7) {
&passwordchanger($r,
- 'ERROR:'.
- 'Passwords must be a minimum of 7 characters long. '.
- 'Please try again.');
- return;
+ ''.
+ &mt('Passwords must be a minimum of 7 characters long.').' '.
+ &mt('Please try again.').'',$caller,$mailtoken);
+ return 1;
}
#
# Check for bad characters
@@ -599,35 +1542,459 @@ ENDERROR
}
if ($badpassword) {
# I can't figure out how to enter bad characters on my browser.
- &passwordchanger($r,<ERROR:
-The password you entered contained illegal characters.
-Valid characters are: space and
+ my $errormessage =''.
+ &mt('The password you entered contained illegal characters.').' '.
+ &mt('Valid characters are').(<<"ENDERROR");
+: space and
+
ENDERROR
+ &passwordchanger($r,$errormessage,$caller,$mailtoken);
+ return 1;
}
#
# Change the password (finally)
my $result = &Apache::lonnet::changepass
- ($user,$domain,$currentpass,$newpass1,$homeserver);
+ ($user,$domain,$currentpass,$newpass1,$homeserver,$caller);
# Inform the user the password has (not?) been changed
+ my $message;
if ($result =~ /^ok$/) {
- $r->print(<<"ENDTEXT");
-
The password for $user was successfully changed
-ENDTEXT
+ $message = &Apache::lonhtmlcommon::confirm_success(&mt('The password for user [_1] was successfully changed.',''.$user.''));
+ if ($caller eq 'reset_by_email') {
+ $r->print($message.' ');
+ } else {
+ &print_main_menu($r, $message);
+ }
} else {
# error error: run in circles, scream and shout
- $r->print(<The password for $user was not changed
-Please make sure your old password was entered correctly.
-ENDERROR
+ $message = &Apache::lonhtmlcommon::confirm_success(
+ &mt("The password for user [_1] was not changed.",''.$user.'').' '.&mt('Please make sure your old password was entered correctly.'),1);
+ unless ($caller eq 'reset_by_email') {
+ $message=&Apache::loncommon::confirmwrapper($message);
+ &print_main_menu($r, $message);
+ }
+ return 1;
}
return;
}
+################################################################
+# discussion display subroutines
+################################################################
+sub discussionchanger {
+ my $r = shift;
+ Apache::lonhtmlcommon::add_breadcrumb(
+ { href => '/adm/preferences?action=changediscussions',
+ text => 'Change Discussion Preferences'});
+ $r->print(Apache::loncommon::start_page('Message Management'));
+ $r->print(Apache::lonhtmlcommon::breadcrumbs('Change Discussion Preferences'));
+ my $user = $env{'user.name'};
+ my $domain = $env{'user.domain'};
+ my %userenv = &Apache::lonnet::get
+ ('environment',['discdisplay','discmarkread']);
+ my $discdisp = 'allposts';
+ my $discmark = 'onmark';
+
+ if (defined($userenv{'discdisplay'})) {
+ unless ($userenv{'discdisplay'} eq '') {
+ $discdisp = $userenv{'discdisplay'};
+ }
+ }
+ if (defined($userenv{'discmarkread'})) {
+ unless ($userenv{'discdisplay'} eq '') {
+ $discmark = $userenv{'discmarkread'};
+ }
+ }
+
+ my $newdisp = 'unread';
+ my $newmark = 'ondisp';
+
+ my $function = &Apache::loncommon::get_users_function();
+ my $color = &Apache::loncommon::designparm($function.'.tabbg',
+ $env{'user.domain'});
+ my %lt = &Apache::lonlocal::texthash(
+ 'pref' => 'Display Preference',
+ 'curr' => 'Current setting ',
+ 'actn' => 'Action',
+ 'sdpf' => 'Set display preferences for discussion posts for both discussion boards and individual resources in all your courses.',
+ 'prca' => 'Preferences can be set that determine',
+ 'whpo' => 'Which posts are displayed when you display a discussion board or resource, and',
+ 'unwh' => 'Under what circumstances posts are identfied as "New"',
+ 'allposts' => 'All posts',
+ 'unread' => 'New posts only',
+ 'ondisp' => 'Once displayed',
+ 'onmark' => 'Once marked as read',
+ 'disa' => 'Posts displayed?',
+ 'npmr' => 'New posts cease to be identified as "New"?',
+ 'thde' => 'The preferences you set here can be overridden within each individual discussion.',
+ 'chgt' => 'Change to '
+ );
+ my $dispchange = $lt{'unread'};
+ my $markchange = $lt{'ondisp'};
+ my $currdisp = $lt{'allposts'};
+ my $currmark = $lt{'onmark'};
+
+ if ($discdisp eq 'unread') {
+ $dispchange = $lt{'allposts'};
+ $currdisp = $lt{'unread'};
+ $newdisp = 'allposts';
+ }
+
+ if ($discmark eq 'ondisp') {
+ $markchange = $lt{'onmark'};
+ $currmark = $lt{'ondisp'};
+ $newmark = 'onmark';
+ }
+
+ $r->print(<<"END");
+
'
+ );
+}
+
+sub verify_and_change_discussion {
+ my $r = shift;
+ my $user = $env{'user.name'};
+ my $domain = $env{'user.domain'};
+ my $message='';
+ if (defined($env{'form.discdisp'}) ) {
+ my $newdisp = $env{'form.newdisp'};
+ if ($newdisp eq 'unread') {
+ $message .=&mt('In discussions: only new posts will be displayed.').' ';
+ &Apache::lonnet::put('environment',{'discdisplay' => $newdisp});
+ &Apache::lonnet::appenv({'environment.discdisplay' => $newdisp});
+ } else {
+ $message .= &mt('In discussions: all posts will be displayed.').' ';
+ &Apache::lonnet::del('environment',['discdisplay']);
+ &Apache::lonnet::delenv('environment.discdisplay');
+ }
+ }
+ if (defined($env{'form.discmark'}) ) {
+ my $newmark = $env{'form.newmark'};
+ if ($newmark eq 'ondisp') {
+ $message.=&Apache::lonhtmlcommon::confirm_success(&mt('In discussions: new posts will be cease to be identified as "NEW" after display.')).' ';
+ &Apache::lonnet::put('environment',{'discmarkread' => $newmark});
+ &Apache::lonnet::appenv({'environment.discmarkread' => $newmark});
+ } else {
+ $message.=&Apache::lonhtmlcommon::confirm_success(&mt('In discussions: posts will be identified as "NEW" until marked as read by the reader.')).' ';
+ &Apache::lonnet::del('environment',['discmarkread']);
+ &Apache::lonnet::delenv('environment.discmarkread');
+ }
+ }
+ $message=&Apache::loncommon::confirmwrapper($message);
+ &print_main_menu($r, $message);
+}
+
+################################################################
+# Subroutines for page display on course access (Course Coordinators)
+################################################################
+sub coursedisplaychanger {
+ my $r = shift;
+ &Apache::lonhtmlcommon::add_breadcrumb(
+ { href => '/adm/preferences?action=changecourseinit',
+ text => 'Change Course Init. Pref.'});
+ $r->print(Apache::loncommon::start_page('Change Course Initialization Preference'));
+ $r->print(Apache::lonhtmlcommon::breadcrumbs('Change Course Init. Pref.'));
+ my $user = $env{'user.name'};
+ my $domain = $env{'user.domain'};
+ my %userenv = &Apache::lonnet::get('environment',['course_init_display']);
+ my $currvalue = 'whatsnew';
+ my $firstselect = '';
+ my $whatsnewselect = 'checked="checked"';
+ if (exists($userenv{'course_init_display'})) {
+ if ($userenv{'course_init_display'} eq 'firstres') {
+ $currvalue = 'firstres';
+ $firstselect = 'checked="checked"';
+ $whatsnewselect = '';
+ }
+ }
+ my %pagenames = &Apache::lonlocal::texthash(
+ firstres => 'First resource',
+ whatsnew => "What's New Page",
+ );
+ my $whatsnew_off=&mt('Display the [_1]first resource[_2] in the course.','','');
+ my $whatsnew_on=&mt("Display the [_1]What's New Page[_2] - a summary of items in the course which require attention.",'','');
+
+ $r->print(' '
+ .&mt('Set the default page to be displayed when you select a course role')
+ .' '
+ .&mt('(Currently: [_1])',$pagenames{$currvalue})
+ .' '
+ .&mt("The global user preference you set for your courses can be overridden in an individual course by setting a course specific setting via the [_1]What's New Page[_2] in the course.",'','')
+ .'