--- loncom/interface/lonprintout.pm 2010/02/28 22:38:45 1.572 +++ loncom/interface/lonprintout.pm 2023/01/15 01:19:50 1.683 @@ -1,8 +1,7 @@ -# # The LearningOnline Network # Printout # -# $Id: lonprintout.pm,v 1.572 2010/02/28 22:38:45 raeburn Exp $ +# $Id: lonprintout.pm,v 1.683 2023/01/15 01:19:50 raeburn Exp $ # # Copyright Michigan State University Board of Trustees # @@ -41,17 +40,17 @@ use Apache::admannotations; use Apache::lonenc; use Apache::entities; use Apache::londefdef; +# use Apache::structurelags; # for language management. use File::Basename; use HTTP::Response; - use LONCAPA::map(); -use POSIX qw(strftime); use Apache::lonlocal; use Carp; use LONCAPA; + my %perm; my %parmhash; my $resources_printed; @@ -76,7 +75,198 @@ my $font_size = 'normalsize'; # Default #---------------------------- Helper helpers. ------------------------- -# Returns the text needd for a student chooser. +## +# Filter function to determine if a resource is a printable sequence. +# +# @param $res -Resource to check. +# +# @return 1 - printable and a resource +# 0 - either notm a sequence or not printable. +# +sub printable_sequence { + my $res = shift; + + # Non-sequences are not listed: + + if (!$res->is_sequence()) { + return 0; + } + + # Person with pav or pfo can always print: + + if ($perm{'pav'} || $perm{'pfo'}) { + return 1; + } + + if ($res->is_sequence()) { + my $symb = $res->symb(); + my $navmap = $res->{NAV_MAP}; + + # Find the first resource in the map: + + my $iterator = $navmap->getIterator($res, undef, undef, 1, 1); + my $first = $iterator->next(); + + while (1) { + if ($first == $iterator->END_ITERATOR) { last; } + if (ref($first) && ! $first->is_sequence()) {last; } + $first = $iterator->next(); + } + + + # Might be an empty map: + + if (!ref($first)) { + return 0; + } + my $partsref = $first->parts(); + my @parts = @$partsref; + my ($open, $close) = $navmap->map_printdates($first, $parts[0]); + return &printable($open, $close); + } + return 0; +} + +# BZ5209: +# Create the states needed to run the helper for incomplete problems from +# the current folder for selected students. +# This includes: +# - A resource selector limited to problems (incompleteness must be +# calculated on a student per student basis. +# - A student selector. +# - Tie in to the FORMAT of the print job. +# +# States: +# CHOOSE_INCOMPLETE_PEOPLE_SEQ - Resource selection. +# CHOOSE_STUDENTS_INCOMPLETE - Student selection. +# CHOOSE_STUDENTS_INCOMPLETE_FORMAT - Format selection +# Parameters: +# helper - the helper which already contains info about the current folder we can +# purloin. +# map - the map for which incomplete problems are to be printed +# nocurrloc - True if printout called from icon/link in Tools in /adm/navmaps +# Return: +# XML that can be parsed by the helper to drive the state machine. +# +sub create_incomplete_folder_selstud_helper { + my ($helper, $map, $nocurrloc) = @_; + + + my $symbFilter = '$res->shown_symb()'; + my $selFilter = '$res->is_problem()'; + + + my $resource_chooser = &generate_resource_chooser('CHOOSE_INCOMPLETE_PEOPLE_SEQ', + 'Select problem(s) to print', + 'multichoice="1" toponly="1" addstatus="1" closeallpages="1" modallink="1" nocurrloc="'.$nocurrloc.'"', + 'RESOURCES', + 'CHOOSE_STUDENTS_INCOMPLETE', + $map, + $selFilter, + '', + $symbFilter, + ''); + + my $student_chooser = &generate_student_chooser('CHOOSE_STUDENTS_INCOMPLETE', + 'student_sort', + 'STUDENTS', + 'CHOOSE_STUDENTS_INCOMPLETE_FORMAT'); + + my $format_chooser = &generate_format_selector($helper, + 'Format of the print job', + 'CHOOSE_STUDENTS_INCOMPLETE_FORMAT'); # end state. + + return $resource_chooser . $student_chooser . $format_chooser; +} + + +# BZ 5209 +# Create the states needed to run the helper for incomplete problems from +# the current folder for selected students. +# This includes: +# - A resource selector limited to problems. (incompleteness must be calculated +# on a student per student basis. +# - A student selector. +# - Tie in to format for the print job. +# States: +# INCOMPLETE_PROBLEMS_COURSE_RESOURCES - Resource selector. +# INCOMPLETE_PROBLEMS_COURSE_STUDENTS - Student selector. +# INCOMPLETE_PROBLEMS_COURSE_FORMAT - Format selection. +# +# Parameters: +# helper - Helper we are creating states for. +# Returns: +# Text that can be parsed by the helper. +# + +sub create_incomplete_course_helper { + my $helper = shift; + + my $filter = '$res->is_problem() || $res->contains_problem() || $res->is_sequence() || $res->is_practice())'; + my $symbfilter = '$res->shown_symb()'; + + my $resource_chooser = &generate_resource_chooser('INCOMPLETE_PROBLEMS_COURSE_RESOURCES', + 'Select problem(s) to print', + 'multichoice = "1" suppressEmptySequences="0" addstatus="1" closeallpagtes="1" modallink="1"', + 'RESOURCES', + 'INCOMPLETE_PROBLEMS_COURSE_STUDENTS', + '', + $filter, + '', + $symbfilter, + ''); + + my $people_chooser = &generate_student_chooser('INCOMPLETE_PROBLEMS_COURSE_STUDENTS', + 'student_sort', + 'STUDENTS', + 'INCOMPLETE_PROBLEMS_COURSE_FORMAT'); + + my $format = &generate_format_selector($helper, + 'Format of the print job', + 'INCOMPLETE_PROBLEMS_COURSE_FORMAT'); # end state. + + return $resource_chooser . $people_chooser . $format; + + +} + +# BZ5209 +# Creates the states needed to run the print helper for a student +# that wants to print his incomplete problems from the current folder. +# Parameters: +# $helper - helper we are generating states for. +# $map - The map for which the student wants incomplete problems. +# $nocurrloc - True if printout called from icon/link in Tools in /adm/navmaps +# Returns: +# XML that defines the helper states being created. +# +# States: +# CHOOSE_INCOMPLETE_SEQ - Resource selector. +# +sub create_incomplete_folder_helper { + my ($helper, $map, $nocurrloc) = @_; + + my $filter = '$res->is_problem()'; + $filter .= ' && $res->resprintable() '; + $filter .= ' && $res->is_incomplete() '; + + my $symfilter = '$res->shown_symb()'; + + my $resource_chooser = &generate_resource_chooser('CHOOSE_INCOMPLETE_SEQ', + 'Select problem(s) to print', + 'multichoice="1", toponly ="1", addstatus="1", closeallpages="1" modallink="1" nocurrloc="'.$nocurrloc.'"', + 'RESOURCES', + 'PAGESIZE', + $map, + $filter, '', + $symfilter, + ''); + + return $resource_chooser; +} + + +# Returns the text neded for a student chooser. # that text must still be parsed by the helper xml parser. # Parameters: # this_state - State name of the chooser. @@ -118,7 +308,8 @@ CHOOSE_STUDENTS # this_state - State name of the chooser. # prompt_text - Text to use to prompt user. # resource_options - Resource tag options e.g. -# "multichoice='1', toponly='1', addstatus='1'" +# "multichoice='1', toponly='1', addstatus='1', +# modallink='1'" # that control the selection and appearance of the # resource selector. # variable - Name of the variable to hold the choice @@ -164,7 +355,6 @@ CHOOSE_RESOURCES CHOOSE_RESOURCES - return $result; } # @@ -196,14 +386,19 @@ sub generate_code_selector {


Generate new CODEd Assignments

Number of CODEd assignments to print: - + if (((\$helper->{'VARS'}{'NUMBER_TO_PRINT_TOTAL'}+0) < 1) && !\$helper->{'VARS'}{'REUSE_OLD_CODES'} && !\$helper->{'VARS'}{'SINGLE_CODE'} && - !\$helper->{'VARS'}{'CODE_SELECTED_FROM_LIST'}) { + !\$helper->{'VARS'}{'CODE_SELECTED_FROM_LIST'} ) { + return "You need to specify the number of assignments to print"; } + if (((\$helper->{'VARS'}{'NUMBER_TO_PRINT_TOTAL'}+0) >= 1) && + (\$helper->{'VARS'}{'SINGLE_CODE'} ne '') ) { + return 'Specifying number of codes to print and a specific code is not compatible'; + } return undef; @@ -212,7 +407,7 @@ sub generate_code_selector {
- Bubble sheet type: + Bubblesheet type: $bubble_types @@ -228,6 +423,8 @@ sub generate_code_selector { !\$helper->{'VARS'}{'CODE_SELECTED_FROM_LIST'}) { return &Apache::lonprintout::is_code_valid(\$helper->{'VARS'}{'SINGLE_CODE'}, \$helper->{'VARS'}{'CODE_OPTION'}); + } elsif (\$helper->{'VARS'}{'SINGLE_CODE'} ne ''){ + return 'Specifying a code name is incompatible with specifying number of codes.'; } else { return undef; # Other forces control us. } @@ -249,8 +446,477 @@ CHOOSE_ANON1 return $result; } +sub generate_common_choosers { + my ($r,$helper,$map,$url,$isProblem,$symbFilter,$start_new_option) = @_; + + my $randomly_ordered_warning = + &get_randomly_ordered_warning($helper, $map); + + # code for a few states used for printout launched from both + # /adm/navmpas and from a resource by a privileged user: + # - To allow resources to be selected for printing. + # - To determine pagination between assignments. + # - To determine how many assignments should be bundled into a single PDF. + + my $resource_selector= &generate_resource_chooser('SELECT_PROBLEMS', + 'Select resources to print', + 'multichoice="1" addstatus="1" closeallpages="1" modallink="1" suppressNavmap="1"', + 'RESOURCES', + 'PRINT_FORMATTING', + $map, + $isProblem, '', $symbFilter, + $start_new_option); + $resource_selector .= &generate_format_selector($helper, + 'How should results be printed?', + 'PRINT_FORMATTING'). + &generate_resource_chooser('CHOOSE_STUDENTS_PAGE', + 'Select Problem(s) to print', + "multichoice='1' addstatus='1' closeallpages ='1' modallink='1'", + 'RESOURCES', + 'PRINT_FORMATTING', + $url, + $isProblem, '', $symbFilter, + $start_new_option); + +# Generate student choosers. + + &Apache::lonxml::xmlparse($r, 'helper', + &generate_student_chooser('CHOOSE_TGT_STUDENTS_PAGE', + 'student_sort', + 'STUDENTS', + 'CHOOSE_STUDENTS_PAGE')); + &Apache::lonxml::xmlparse($r, 'helper', + &generate_student_chooser('CHOOSE_STUDENTS', + 'student_sort', + 'STUDENTS', + 'SELECT_PROBLEMS')); + &Apache::lonxml::xmlparse($r, 'helper', $resource_selector); + + my $cdom = $env{'course.'.$env{'request.course.id'}.'.domain'}; + my $cnum = $env{'course.'.$env{'request.course.id'}.'.num'}; + my @names=&Apache::lonnet::getkeys('CODEs',$cdom,$cnum); + my $namechoice=''; + foreach my $name (sort {uc($a) cmp uc($b)} @names) { + if ($name =~ /^error: 2 /) { next; } + if ($name =~ /^type\0/) { next; } + $namechoice.=''.$name.''; + } + + my %code_values; + my %codes_to_print; + foreach my $key (@names) { + %code_values = &Apache::grades::get_codes($key, $cdom, $cnum); + foreach my $key (keys(%code_values)) { + $codes_to_print{$key} = 1; + } + } + + my $code_selection; + foreach my $code (sort {uc($a) cmp uc($b)} (keys(%codes_to_print))) { + my $choice = $code; + if ($code =~ /^[A-Z]+$/) { # Alpha code + $choice = &letters_to_num($code); + } + push(@{$helper->{DATA}{ALL_CODE_CHOICES}},[$code,$choice]); + } + if (%codes_to_print) { + $code_selection .=' + Choose single CODE from list: + + + + + push(@{$state->{CHOICES}},@{$helper->{DATA}{ALL_CODE_CHOICES}}); + + +
+ '.$/; + } + + my @lines = &Apache::lonnet::get_scantronformat_file(); + my $codechoice=''; + foreach my $line (@lines) { + next if (($line =~ /^\#/) || ($line eq '')); + my ($name,$description,$code_type,$code_length)= + (split(/:/,$line))[0,1,2,4]; + if ($code_length > 0 && + $code_type =~/^(letter|number|-1)/) { + $codechoice.=''.$description.''; + } + } + if ($codechoice eq '') { + $codechoice='Default'; + } + my $anon1 = &generate_code_selector($helper, + 'CHOOSE_ANON1', + 'SELECT_PROBLEMS', + $codechoice, + $code_selection, + $namechoice) . $resource_selector; + + &Apache::lonxml::xmlparse($r, 'helper',$anon1); + + my $anon_page = &generate_code_selector($helper, + 'CHOOSE_ANON1_PAGE', + 'SELECT_PROBLEMS_PAGE', + $codechoice, + $code_selection, + $namechoice) . + &generate_resource_chooser('SELECT_PROBLEMS_PAGE', + 'Select Problem(s) to print', + "multichoice='1' addstatus='1' closeallpages ='1' modallink='1'", + 'RESOURCES', + 'PRINT_FORMATTING', + $url, + $isProblem, '', $symbFilter, + $start_new_option); + &Apache::lonxml::xmlparse($r, 'helper', $anon_page); + return ($randomly_ordered_warning,$codechoice,$code_selection,$namechoice); +} + +# Returns the XML for choosing how assignments are to be formatted +# that text must still be parsed by the helper xml parser. +# Parameters: 3 (required) + +# helper - The helper; $helper->{'VARS'}->{'PRINT_TYPE'} used +# to check if splitting PDFs by section can be offered. +# title - Title for the current state. +# this_state - State name of the chooser. + +sub generate_format_selector { + my ($helper,$title,$this_state) = @_; + my $secpdfoption; + unless (($helper->{'VARS'}->{'PRINT_TYPE'} eq 'problems_for_anon') || + ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'problems_for_anon_page') || + ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'resources_for_anon') || + ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'select_sequences_problems_for_anon') || + ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'select_sequences_resources_for_anon')) { + $secpdfoption = 'Each PDF contains exactly one section'; + } + return < +
How should the results be printed?
+ + Start each student\'s assignment on a new page/column (add a pagefeed after each assignment) + Add one empty page/column after each student\'s assignment + Add two empty pages/column after each student\'s assignment + Add three empty pages/column after each student\'s assignment + + PAGESIZE +
How do you want assignments split into PDF files?
+ + All assignments in a single PDF file + $secpdfoption + Each PDF contains exactly one assignment + + Specify the number of assignments per PDF: + + +RESOURCE_SELECTOR +} + #----------------------------------------------------------------------- +# Computes an open and close date from a list of open/close dates for a resource's +# parts. +# +# @param \@opens - reference to an array of open dates. +# @param \@closes - reference to an array of close dates. +# +# @return ($open, $close) +# +# @note If open/close dates are not defined they will be returned as undef +# @note It is possible for there to be no overlap in which case -1,-1 +# will be returned. +# @note The algorithm used is to take the latest open date and the earliest end date. +# +sub compute_open_window { + my ($opensref, $closesref) = @_; + + my @opens = @$opensref; + my @closes = @$closesref; + + # latest open date: + my $latest_open; + + foreach my $open (@opens) { + if (!defined($latest_open) || ($open > $latest_open)) { + $latest_open = $open; + } + } + # Earliest close: + + my $earliest_close; + foreach my $close (@closes) { + if (!defined($earliest_close) || ($close < $earliest_close)) { + $earliest_close = $close; + } + } + + # If no overlap...both are -1 as promised. + + if (($earliest_close ne '') && ($latest_open ne '') + && ($earliest_close < $latest_open)) { + $latest_open = -1; + $earliest_close = -1; + } + + return ($latest_open, $earliest_close); + +} + +## +# Determines if 'now' is within the set of printable dates. +# +# @param $open_date - Starting date/timestamp. +# @param $close_date - Ending date/timestamp. +# +# @return 0 - Not open. +# @return 1 - open. +# +sub printable { + my ($open_date, $close_date) = @_; + + + my $now = time(); + + # Have to do a bit of fancy footwork around undefined open/close dates: + + if ($open_date && ($open_date > $now)) { + return 0; + } + + if ($close_date && ($close_date < $now)) { + return 0; + } + + return 1; + +} + +## +# Returns the innermost print start/print end dates for a resource. +# This is done by looking at the start/end dates for its parts and choosing +# the intersection of those dates. +# +# @param res - lonnvamaps::resource object that represents the resource. +# +# @return (opendate, closedate) +# +# @note If open/close dates are not defined they will be returned as undef +# @note It is possible for there to be no overlap in which case -1,-1 +# will be returned. +# @note The algorithm used is to take the latest open date and the earliest end date. +# For consistency with &printable() in lonnavmaps.pm determination of start +# date for printing checks printstartdate param first, then, if not set, +# opendate param, then, if not set, contentopen param. + +sub get_print_dates { + my $res = shift; + my $partsref = $res->parts(); + my @parts; + if (ref($partsref) eq 'ARRAY') { + @parts = @{$partsref}; + } + my $open_date; + my $close_date; + my @open_dates; + my @close_dates; + + + if (@parts) { + foreach my $part (@parts) { + my $partopen = $res->parmval('printstartdate', $part); + my $partclose = $res->parmval('printenddate', $part); + if (!$partopen) { + $partopen = $res->parmval('opendate',$part); + } + if (!$partopen) { + $partopen = $res->parmval('contentopen',$part); + } + if ($partopen) { + push(@open_dates, $partopen); + } + if ($partclose) { + push(@close_dates, $partclose); + } + push(@open_dates, $partopen); + push(@close_dates, $partclose); + } + } + + ($open_date, $close_date) = &compute_open_window(\@open_dates, \@close_dates); + + return ($open_date, $close_date); +} + +## +# Get the dates for which a course says a resource can be printed. This is like +# get_print_dates but namvaps::course_print_dates are gotten...and not converted +# to times either. +# +# @param $res - Reference to a resource has from lonnvampas::resource. +# +# @return (opendate, closedate) +# +sub course_print_dates { + my $res = shift; + my $partsref = $res->parts(); + my @parts = @$partsref; + my $open_date; + my $close_date; + my @open_dates; + my @close_dates; + my $navmap = $res->{NAV_MAP}; # Slightly OO dirty. + + # Don't bother looping over undefined or empty parts arraY; + + if (@parts) { + foreach my $part (@parts) { + my ($partopen, $partclose) = $navmap->course_printdates($res, $part); + push(@open_dates, $partopen); + push(@close_dates, $partclose); + } + ($open_date, $close_date) = &compute_open_window(\@open_dates, \@close_dates); + } + return ($open_date, $close_date); +} +## +# Same as above but for the enclosing map: +# +sub map_print_dates { + my $res = shift; + my $partsref = $res->parts(); + my @parts = @$partsref; + my $open_date; + my $close_date; + my @open_dates; + my @close_dates; + my $navmap = $res->{NAV_MAP}; # slightly OO dirty. + + + # Don't bother looping over undefined or empty parts arraY; + + if (@parts) { + foreach my $part (@parts) { + my ($partopen, $partclose) = $navmap->map_printdates($res, $part); + push(@open_dates, $partopen); + push(@close_dates, $partclose); + } + ($open_date, $close_date) = &compute_open_window(\@open_dates, \@close_dates); + } + return ($open_date, $close_date); +} + +# Determine if a resource is incomplete given the map: +# Parameters: +# $username - Name of user for whom we are checking. +# $domain - Domain of user we are checking. +# $map - map name. +# Returns: +# 0 - map is not incomplete. +# 1 - map is incomplete. +# +sub incomplete { + my ($username, $domain, $map) = @_; + + + my $navmap = Apache::lonnavmaps::navmap->new($username, $domain); + + + if (defined($navmap)) { + my $res = $navmap->getResourceByUrl($map); + my $result = $res->is_incomplete(); + return $result; + } else { + return 1; + } +} +# +# When printing for students, the resources and order of the +# resources may need to be altered if there are folders with +# random selectiopn or random ordering (or both) enabled. +# This sub computes the set of resources to print for a student +# modified both by random ordering and selection and filtered +# to only those that are in the original set selected to be printed. +# +# Parameters: +# $map - The URL of the folder being printed. +# Used to determine which startResource and finishResource +# to use when using the navmap's getIterator method. +# $seq - The original set of resources to print. +# (really an array of resource names (array of symb's). +# $who - Student/domain for whome the sequence will be generated. +# $code - CODE being printed when printing Problems/Resources +# from folder for CODEd assignments +# $nohidemap - If true, parameter in map for hiddenresource will be +# ignored. The user calling the routine should have +# both the pav and vgr privileges if this is set to true). +# +# Implicit inputs: +# $ +# Returns: +# reference to an array of resources that can be passed to +# print_resources. +# +sub master_seq_to_person_seq { + my ($map, $seq, $who, $code, $nohidemap) = @_; + + + my ($username, $userdomain, $usersection) = split(/:/, $who); + + # Toss the sequence up into a hash so that we have O(1) lookup time. + # on the items that come out of the user's list of resources. + # + + my %seq_hash = map {$_ => 1} @$seq; + my @output_seq; + + my $unhidden; + if ($nohidemap) { + $unhidden = &Apache::lonnet::clutter($map); + } + + my $navmap = Apache::lonnavmaps::navmap->new($username, $userdomain, + $code, $unhidden); + my ($start,$finish); + + if ($map) { + my $mapres = $navmap->getResourceByUrl($map); + if ($mapres->is_map()) { + $start = $mapres->map_start(); + $finish = $mapres->map_finish(); + } + } + unless ($start && $finish) { + $start = $navmap->firstResource(); + $finish = $navmap->finishResource(); + } + + my $iterator = $navmap->getIterator($start,$finish,{},1); + + # Iterate on the resource..select the items that are randomly selected + # and that are in the seq_has. Presumably the iterator will take care + # of the random ordering part of the deal. + # + my $curres; + while ($curres = $iterator->next()) { + # + # Only process resources..that are not removed by randomout... + # and are selected for printint as well. + # + if (ref($curres) && ! $curres->randomout()) { + my $currsymb = $curres->symb(); + if (exists($seq_hash{$currsymb})) { + push(@output_seq, $currsymb); + } + } + } + + return \@output_seq; # for now. + +} + # Fetch the contents of a resource, uninterpreted. # This is used here to fetch a latex file to be included @@ -306,8 +972,16 @@ sub set_font_size { my ($text) = @_; - $text =~ s/\\begin{document}/\\begin{document}{\\$font_size/; - $text =~ s/\\end{document}/}\\end{document}/; + # There appear to be cases where the font directive is empty.. in which + # case the first substituion would insert a spurious \ oh happy day. + # as this has been the cause of much mystery and hair pulling _sigh_ + + if ($font_size ne '') { + + $text =~ s/\\begin\{document}/\\begin{document}{\\$font_size/; + $text =~ s/\\end\{document}/}\\end{document}/; + + } return $text; @@ -346,9 +1020,10 @@ sub include_pdf { # (unlikely). If it did exist, add the pdf to the set of files/images that # need tob e converted for this print job: - $file =~ s|(.*)/res/|/home/httpd/html/res/|; + my $londocroot = $Apache::lonnet::perlvar{'lonDocRoot'}; + $file =~ s{(.*)/res/}{$londocroot/res/}; - open(FILE,">>/home/httpd/prtspool/$env{'user.name'}_$env{'user.domain'}_printout.dat"); + open(FILE,">>","$Apache::lonnet::perlvar{'lonPrtDir'}/$env{'user.name'}_$env{'user.domain'}_printout.dat"); print FILE ("$file\n"); close (FILE); @@ -371,7 +1046,29 @@ sub include_pdf { } - +## +# Collect the various \select_language{language_name} +# latex tags to build a \usepackage[lang-list]{babel} which will +# appear just prior to the \begin{document} at the front of the concatenated +# set of resources: +# @param doc - The string of latex to search/replace. +# @return string +# @retval - the modified document stringt. +# +sub collect_languages { + my $doc = shift; + my %languages; + while ($doc =~ /\\selectlanguage\{(\w+)}/mg) { + $languages{$1} = 1; # allows us to request each language exactly once. + } + my @lang_list = (keys(%languages)); # List of unique languages + if (scalar @lang_list) { + my $babel_header = '\usepackage[' . join(',', @lang_list) .']{babel}'. "\n"; + $doc =~ s/\\begin\{document}/$babel_header\\begin{document}/; + } + return $doc; +} +#------------------------------------------------------------------- # # ssi_with_retries- Does the server side include of a resource. @@ -418,7 +1115,6 @@ sub ssi_with_retries { $ssi_last_error_resource = $resource; $ssi_last_error = $response->code . " " . $response->message; $content='\section*{!!! An error occurred !!!}'; - &Apache::lonnet::logthis("Error in SSI resource: $resource Error: $ssi_last_error"); } return $content; @@ -434,7 +1130,6 @@ sub get_student_view_with_retries { $ssi_last_error_resource = $curresline.' for user '.$username.':'.$userdomain; $ssi_last_error = $response->code . " " . $response->message; $content='\section*{!!! An error occurred !!!}'; - &Apache::lonnet::logthis("Error in SSI (student view) resource: $curresline Error: $ssi_last_error User: $username:$userdomain"); } return $content; @@ -551,7 +1246,7 @@ sub format_page_header { # there is '\\ \\ ' in the page header. That's cause a error in LaTeX if($format =~ /\\\\\s\\\\\s/) { #TODO find sensible caption for page header - my $testPrintout = '\\\\'.&mt('Construction Space').' \\\\'.&mt('Test-Printout '); + my $testPrintout = '\\\\'.&mt('Authoring Space').' \\\\'.&mt('Test-Printout '); $format =~ s/\\\\\s\\\\\s/$testPrintout/; } # @@ -671,8 +1366,9 @@ sub is_valid_alpha_code { sub is_code_valid { my ($code_value, $code_option) = @_; my ($code_type, $code_length) = ('letter', 6); # defaults. - my @lines = &Apache::grades::get_scantronformat_file(); + my @lines = &Apache::lonnet::get_scantronformat_file(); foreach my $line (@lines) { + next if (($line =~ /^\#/) || ($line eq '')); my ($name, $type, $length) = (split(/:/, $line))[0,2,4]; if($name eq $code_option) { $code_length = $length; @@ -689,6 +1385,22 @@ sub is_code_valid { } } +# +# Compare two students by section (Used to sort by section). +# +# Implicit inputs, +# $a - The first one +# $b - The second one. +# +# Returns: +# a-section cmp b-section +# +sub compare_sections { + my ($u1, $d1, $s1, $n1, $stat1) = split(/:/, $a); + my ($u2, $d2, $s2, $n2, $stat2) = split(/:/, $b); + + return $s1 cmp $s2; +} # Compare two students by name. The students are in the form # returned by the helper: @@ -750,8 +1462,8 @@ sub compare_names { sub latex_header_footer_remove { my $text = shift; - $text =~ s/\\end{document}//; - $text =~ s/\\documentclass([^&]*)\\begin{document}//; + $text =~ s/\\end\{document}//; + $text =~ s/\\documentclass([^&]*)\\begin\{document}//; return $text; } # @@ -760,8 +1472,8 @@ sub latex_header_footer_remove { # necessity is determined by the problem_split param. # sub encapsulate_minipage { - my ($text) = @_; - if (!($env{'form.problem.split'} =~ /yes/i)) { + my ($text,$problem_split) = @_; + if (!($problem_split =~ /yes/i)) { $text = '\begin{minipage}{\textwidth}'.$text.'\end{minipage}'; } return $text; @@ -1301,21 +2013,27 @@ sub page_format_transformation { $fancypagestatement="\\rhead{}\\chead{}\\lhead{$header_text}"; } if ($layout eq 'album') { - $text =~ s/\\begin{document}/\\setlength{\\oddsidemargin}{$oddoffset}\\setlength{\\evensidemargin}{$evenoffset}$topmargintoinsert\n\\setlength{\\textwidth}{$textwidth}\\setlength{\\textheight}{$textheight}\\setlength{\\textfloatsep}{8pt plus 2\.0pt minus 4\.0pt}\n\\newlength{\\minipagewidth}\\setlength{\\minipagewidth}{\\textwidth\/\$number_of_columns-0\.2cm}\\usepackage{fancyhdr}\\addtolength{\\headheight}{\\baselineskip}\n\\pagestyle{fancy}$fancypagestatement\\usepackage{booktabs}\\begin{document}\\voffset=-0\.8 cm\\setcounter{page}{1}\n /; + $text =~ s/\\begin\{document}/\\setlength{\\oddsidemargin}{$oddoffset}\\setlength{\\evensidemargin}{$evenoffset}$topmargintoinsert\n\\setlength{\\textwidth}{$textwidth}\\setlength{\\textheight}{$textheight}\\setlength{\\textfloatsep}{8pt plus 2\.0pt minus 4\.0pt}\n\\newlength{\\minipagewidth}\\setlength{\\minipagewidth}{\\textwidth\/\$number_of_columns-0\.2cm}\\usepackage{fancyhdr}\\addtolength{\\headheight}{\\baselineskip}\n\\pagestyle{fancy}$fancypagestatement\\usepackage{booktabs}\\begin{document}\\voffset=-0\.8 cm\\setcounter{page}{1}\n /; } elsif ($layout eq 'book') { if ($choice ne 'All class print') { - $text =~ s/\\begin{document}/\\textheight $textheight\\oddsidemargin = $evenoffset\\evensidemargin = $evenoffset $topmargintoinsert\n\\textwidth= $textwidth\\newlength{\\minipagewidth}\\setlength{\\minipagewidth}{\\textwidth\/\$number_of_columns-0\.2cm}\n\\renewcommand{\\ref}{\\keephidden\}\\usepackage{fancyhdr}\\addtolength{\\headheight}{\\baselineskip}\\pagestyle{fancy}$fancypagestatement\\usepackage{booktabs}\\begin{document}\n\\voffset=-0\.8 cm\\setcounter{page}{1}\n/; + $text =~ s/\\begin\{document}/\\textheight $textheight\\oddsidemargin = $evenoffset\\evensidemargin = $evenoffset $topmargintoinsert\n\\textwidth= $textwidth\\newlength{\\minipagewidth}\\setlength{\\minipagewidth}{\\textwidth\/\$number_of_columns-0\.2cm}\n\\renewcommand{\\ref}{\\keephidden\}\\usepackage{fancyhdr}\\addtolength{\\headheight}{\\baselineskip}\\pagestyle{fancy}$fancypagestatement\\usepackage{booktabs}\\begin{document}\n\\voffset=-0\.8 cm\\setcounter{page}{1}\n/; } else { - $text =~ s/\\pagestyle{fancy}\\rhead{}\\chead{}\s*\\begin{document}/\\textheight = $textheight\\oddsidemargin = $evenoffset\n\\evensidemargin = $evenoffset $topmargintoinsert\\textwidth= $textwidth\\newlength{\\minipagewidth}\n\\setlength{\\minipagewidth}{\\textwidth\/\$number_of_columns-0\.2cm}\\renewcommand{\\ref}{\\keephidden\}\\pagestyle{fancy}\\rhead{}\\chead{}\\usepackage{booktabs}\\begin{document}\\voffset=-0\.8cm\n\\setcounter{page}{1} \\vskip 5 mm\n /; + $text =~ s/\\pagestyle\{fancy}\\rhead\{}\\chead\{}\s*\\begin\{document}/\\textheight = $textheight\\oddsidemargin = $evenoffset\n\\evensidemargin = $evenoffset $topmargintoinsert\\textwidth= $textwidth\\newlength{\\minipagewidth}\n\\setlength{\\minipagewidth}{\\textwidth\/\$number_of_columns-0\.2cm}\\renewcommand{\\ref}{\\keephidden\}\\pagestyle{fancy}\\rhead{}\\chead{}\\usepackage{booktabs}\\begin{document}\\voffset=-0\.8cm\n\\setcounter{page}{1} \\vskip 5 mm\n /; } if ($papersize eq 'a4') { - $text =~ s/(\\begin{document})/$1\\special{papersize=210mm,297mm}/; + my $papersize_text; + if ($perm{'pav'}) { + $papersize_text = '\\special{papersize=210mm,297mm}'; + } else { + $papersize_text = '\special{papersize=210mm,297mm}'; + } + $text =~ s/(\\begin\{document})/$1$papersize_text/; } } if ($tableofcontents eq 'yes') {$text=~s/(\\setcounter\{page\}\{1\})/$1 \\tableofcontents\\newpage /;} if ($indexlist eq 'yes') { - $text=~s/(\\begin{document})/\\makeindex $1/; - $text=~s/(\\end{document})/\\strut\\\\\\strut\\printindex $1/; + $text=~s/(\\begin\{document})/\\makeindex $1/; + $text=~s/(\\end\{document})/\\strut\\\\\\strut\\printindex $1/; } return $text; } @@ -1324,12 +2042,12 @@ sub page_format_transformation { sub page_cleanup { my $result = shift; - $result =~ m/\\end{document}(\d*)$/; + $result =~ m/\\end\{document}(\d*)$/; my $number_of_columns = $1; my $insert = '{'; for (my $id=1;$id<=$number_of_columns;$id++) { $insert .='l'; } $insert .= '}'; - $result =~ s/(\\begin{longtable})INSERTTHEHEADOFLONGTABLE\\endfirsthead\\endhead/$1$insert/g; + $result =~ s/(\\begin\{longtable})INSERTTHEHEADOFLONGTABLE\\endfirsthead\\endhead/$1$insert/g; $result =~ s/&\s*REMOVETHEHEADOFLONGTABLE\\\\/\\\\/g; return $result,$number_of_columns; } @@ -1365,16 +2083,16 @@ my $end_of_student = "\n".'\special{ps:E sub latex_corrections { my ($number_of_columns,$result,$selectionmade,$answer_mode) = @_; -# $result =~ s/\\includegraphics{/\\includegraphics\[width=\\minipagewidth\]{/g; +# $result =~ s/\\includegraphics\{/\\includegraphics\[width=\\minipagewidth\]{/g; my $copyright = ©right_line(); if ($selectionmade eq '1' || $answer_mode eq 'only') { - $result =~ s/(\\end{document})/\\strut\\vskip 0 mm $copyright $end_of_student $1/; + $result =~ s/(\\end\{document})/\\strut\\vskip 0 mm $copyright $end_of_student $1/; } else { - $result =~ s/(\\end{document})/\\strut\\vspace\*{-4 mm}\\newline $copyright $end_of_student $1/; + $result =~ s/(\\end\{document})/\\strut\\vspace\*{-4 mm}\\newline $copyright $end_of_student $1/; } $result =~ s/\$number_of_columns/$number_of_columns/g; - $result =~ s/(\\end{longtable}\s*)(\\strut\\newline\\noindent\\makebox\[\\textwidth\/$number_of_columns\]\[b\]{\\hrulefill})/$2$1/g; - $result =~ s/(\\end{longtable}\s*)\\strut\\newline/$1/g; + $result =~ s/(\\end\{longtable}\s*)(\\strut\\newline\\noindent\\makebox\[\\textwidth\/$number_of_columns\]\[b\]\{\\hrulefill})/$2$1/g; + $result =~ s/(\\end\{longtable}\s*)\\strut\\newline/$1/g; #-- LaTeX corrections my $first_comment = index($result,'