loncom/loncnew - diff

Return to loncnew CVS log

Up to [LON-CAPA] / loncom

Diff for /loncom/loncnew between versions 1.71 and 1.95

version 1.71, 2005/06/16 22:33:45	version 1.95, 2011/01/24 11:02:32
Line 60 use LONCAPA::Stack;	Line 60 use LONCAPA::Stack;
use LONCAPA::LondConnection;	use LONCAPA::LondConnection;
use LONCAPA::LondTransaction;	use LONCAPA::LondTransaction;
use LONCAPA::Configuration;	use LONCAPA::Configuration;
use LONCAPA::HashIterator;
use Fcntl qw(:flock);	use Fcntl qw(:flock);


Line 73 my %perlvar = %{$perlvarref};	Line 72 my %perlvar = %{$perlvarref};
#	#
# parent and shared variables.	# parent and shared variables.

my %ChildHash; # by pid -> host.	my %ChildPid; # by pid -> host.
my %HostToPid; # By host -> pid.	my %ChildHost; # by host.
my %HostHash; # by loncapaname -> IP.
my %listening_to; # Socket->host table for who the parent	my %listening_to; # Socket->host table for who the parent
# is listening to.	# is listening to.
my %parent_dispatchers; # host-> listener watcher events.	my %parent_dispatchers; # host-> listener watcher events.
Line 87 my $ClientConnection = 0; # Uniquifier f	Line 85 my $ClientConnection = 0; # Uniquifier f

my $DebugLevel = 0;	my $DebugLevel = 0;
my $NextDebugLevel= 2; # So Sigint can toggle this.	my $NextDebugLevel= 2; # So Sigint can toggle this.
my $IdleTimeout= 600; # Wait 10 minutes before pruning connections.	my $IdleTimeout= 5*60; # Seconds to wait prior to pruning connections.

my $LogTransactions = 0; # When True, all transactions/replies get logged.	my $LogTransactions = 0; # When True, all transactions/replies get logged.
my $executable = $0; # Get the full path to me.	my $executable = $0; # Get the full path to me.
Line 96 my $executable = $0; # Get the full	Line 94 my $executable = $0; # Get the full
# The variables below are only used by the child processes.	# The variables below are only used by the child processes.
#	#
my $RemoteHost; # Name of host child is talking to.	my $RemoteHost; # Name of host child is talking to.
	my $RemoteHostId; # default lonid of host child is talking to.
	my @all_host_ids;
my $UnixSocketDir= $perlvar{'lonSockDir'};	my $UnixSocketDir= $perlvar{'lonSockDir'};
my $IdleConnections = Stack->new(); # Set of idle connections	my $IdleConnections = Stack->new(); # Set of idle connections
my %ActiveConnections; # Connections to the remote lond.	my %ActiveConnections; # Connections to the remote lond.
Line 106 my $ConnectionCount = 0;	Line 106 my $ConnectionCount = 0;
my $IdleSeconds = 0; # Number of seconds idle.	my $IdleSeconds = 0; # Number of seconds idle.
my $Status = ""; # Current status string.	my $Status = ""; # Current status string.
my $RecentLogEntry = "";	my $RecentLogEntry = "";
my $ConnectionRetries=2; # Number of connection retries allowed.	my $ConnectionRetries=5; # Number of connection retries allowed.
my $ConnectionRetriesLeft=2; # Number of connection retries remaining.	my $ConnectionRetriesLeft=5; # Number of connection retries remaining.
my $LondVersion = "unknown"; # Version of lond we talk with.	my $LondVersion = "unknown"; # Version of lond we talk with.
my $KeyMode = ""; # e.g. ssl, local, insecure from last connect.	my $KeyMode = ""; # e.g. ssl, local, insecure from last connect.
my $LondConnecting = 0; # True when a connection is being built.	my $LondConnecting = 0; # True when a connection is being built.



my $DieWhenIdle = 1; # When true children die when trimmed -> 0.
my $I_am_child = 0; # True if this is the child process.	my $I_am_child = 0; # True if this is the child process.

#	#
Line 159 sub LogPerm {	Line 158 sub LogPerm {
my $now=time;	my $now=time;
my $local=localtime($now);	my $local=localtime($now);
my $fh=IO::File->new(">>$execdir/logs/lonnet.perm.log");	my $fh=IO::File->new(">>$execdir/logs/lonnet.perm.log");
	chomp($message);
print $fh "$now:$message:$local\n";	print $fh "$now:$message:$local\n";
}	}

Line 198 sub Log {	Line 198 sub Log {
my $now = time;	my $now = time;
my $local = localtime($now);	my $local = localtime($now);
my $finalformat = "$local ($$) [$RemoteHost] [$Status] ";	my $finalformat = "$local ($$) [$RemoteHost] [$Status] ";
my $finalformat = $finalformat.$format."\n";	$finalformat = $finalformat.$format."\n";

# open the file and put the result.	# open the file and put the result.

Line 308 sub SocketTimeout {	Line 308 sub SocketTimeout {
}	}

}	}

#	#
# This function should be called by the child in all cases where it must	# This function should be called by the child in all cases where it must
# exit. If the child process is running with the DieWhenIdle turned on	# exit. The child process must create a lock file for the AF_UNIX socket
# it must create a lock file for the AF_UNIX socket in order to prevent	# in order to prevent connection requests from lonnet in the time between
# connection requests from lonnet in the time between process exit	# process exit and the parent picking up the listen again.
# and the parent picking up the listen again.	#
# Parameters:	# Parameters:
# exit_code - Exit status value, however see the next parameter.	# exit_code - Exit status value, however see the next parameter.
# message - If this optional parameter is supplied, the exit	# message - If this optional parameter is supplied, the exit
Line 324 sub child_exit {	Line 325 sub child_exit {

# Regardless of how we exit, we may need to do the lock thing:	# Regardless of how we exit, we may need to do the lock thing:

if($DieWhenIdle) {	#
#	# Create a lock file since there will be a time window
# Create a lock file since there will be a time window	# between our exit and the parent's picking up the listen
# between our exit and the parent's picking up the listen	# during which no listens will be done on the
# during which no listens will be done on the	# lonnet client socket.
# lonnet client socket.	#
#	my $lock_file = &GetLoncSocketPath().".lock";
my $lock_file = GetLoncSocketPath().".lock";	open(LOCK,">$lock_file");
open(LOCK,">$lock_file");	print LOCK "Contents not important";
print LOCK "Contents not important";	close(LOCK);
close(LOCK);	unlink(&GetLoncSocketPath());

exit(0);
}
# Now figure out how we exit:

if($message) {	if ($message) {
die $message;	die($message);
} else {	} else {
exit($exit_code);	exit($exit_code);
}	}
Line 375 sub Tick {	Line 372 sub Tick {
KillSocket($Socket);	KillSocket($Socket);
$IdleSeconds = 0; # Otherwise all connections get trimmed to fast.	$IdleSeconds = 0; # Otherwise all connections get trimmed to fast.
UpdateStatus();	UpdateStatus();
if(($ConnectionCount == 0) && $DieWhenIdle) {	if(($ConnectionCount == 0)) {
&child_exit(0);	&child_exit(0);

}	}
Line 444 Trigger disconnections of idle sockets.	Line 441 Trigger disconnections of idle sockets.

sub SetupTimer {	sub SetupTimer {
Debug(6, "SetupTimer");	Debug(6, "SetupTimer");
Event->timer(interval => 1, cb => \&Tick );	Event->timer(interval => 1, cb => \&Tick,
	hard => 1);
}	}

=pod	=pod
Line 506 the data and Event->w->fd is the socket	Line 504 the data and Event->w->fd is the socket
sub ClientWritable {	sub ClientWritable {
my $Event = shift;	my $Event = shift;
my $Watcher = $Event->w;	my $Watcher = $Event->w;
	if (!defined($Watcher)) {
	&child_exit(-1,'No watcher for event in ClientWritable');
	}
my $Data = $Watcher->data;	my $Data = $Watcher->data;
my $Socket = $Watcher->fd;	my $Socket = $Watcher->fd;

Line 569 sub ClientWritable {	Line 570 sub ClientWritable {
}	}
} else {	} else {
$Watcher->cancel(); # A delayed request...just cancel.	$Watcher->cancel(); # A delayed request...just cancel.
	return;
}	}
}	}

Line 608 sub CompleteTransaction {	Line 610 sub CompleteTransaction {
StartClientReply($Transaction, $data);	StartClientReply($Transaction, $data);
} else { # Delete deferred transaction file.	} else { # Delete deferred transaction file.
Log("SUCCESS", "A delayed transaction was completed");	Log("SUCCESS", "A delayed transaction was completed");
LogPerm("S:$Transaction->getClient() :".$Transaction->getRequest());	LogPerm("S:".$Transaction->getClient().":".$Transaction->getRequest());
unlink $Transaction->getFile();	unlink($Transaction->getFile());
}	}
}	}

Line 760 sub KillSocket {	Line 762 sub KillSocket {
delete ($ActiveTransactions{$Socket});	delete ($ActiveTransactions{$Socket});
}	}
if(exists($ActiveConnections{$Socket})) {	if(exists($ActiveConnections{$Socket})) {
	$ActiveConnections{$Socket}->cancel;
delete($ActiveConnections{$Socket});	delete($ActiveConnections{$Socket});
$ConnectionCount--;	$ConnectionCount--;
if ($ConnectionCount < 0) { $ConnectionCount = 0; }	if ($ConnectionCount < 0) { $ConnectionCount = 0; }
Line 771 sub KillSocket {	Line 774 sub KillSocket {
EmptyQueue();	EmptyQueue();
CloseAllLondConnections; # Should all already be closed but...	CloseAllLondConnections; # Should all already be closed but...
}	}
	UpdateStatus();
}	}

=pod	=pod
Line 942 sub LondReadable {	Line 946 sub LondReadable {
CompleteTransaction($Socket,	CompleteTransaction($Socket,
$ActiveTransactions{$Socket});	$ActiveTransactions{$Socket});
} else {	} else {
Log("SUCCESS", "Connection ".$ConnectionCount." to "	my $count = $Socket->GetClientData();
	Log("SUCCESS", "Connection ".$count." to "
.$RemoteHost." now ready for action");	.$RemoteHost." now ready for action");
}	}
ServerToIdle($Socket); # Next work unit or idle.	ServerToIdle($Socket); # Next work unit or idle.
Line 955 sub LondReadable {	Line 960 sub LondReadable {
# We need to be writable for this and probably don't belong	# We need to be writable for this and probably don't belong
# here inthe first place.	# here inthe first place.

Deubg(6, "SendingRequest state encountered in readable");	Debug(6, "SendingRequest state encountered in readable");
$Watcher->poll("w");	$Watcher->poll("w");
$Watcher->cb(\&LondWritable);	$Watcher->cb(\&LondWritable);

Line 1153 sub LondWritable {	Line 1158 sub LondWritable {
}	}

}	}

=pod	=pod

=cut	=cut


sub QueueDelayed {	sub QueueDelayed {
Debug(3,"QueueDelayed called");	Debug(3,"QueueDelayed called");

Line 1164 sub QueueDelayed {	Line 1171 sub QueueDelayed {

Debug(4, "Delayed path: ".$path);	Debug(4, "Delayed path: ".$path);
opendir(DIRHANDLE, $path);	opendir(DIRHANDLE, $path);

my @alldelayed = grep /\.$RemoteHost$/, readdir DIRHANDLE;	my $host_id_re = '(?:'.join('\|',map {quotemeta($_)} (@all_host_ids)).')';
	my @alldelayed = grep(/\.$host_id_re$/, readdir(DIRHANDLE));
closedir(DIRHANDLE);	closedir(DIRHANDLE);
my $dfname;	foreach my $dfname (sort(@alldelayed)) {
my $reqfile;	my $reqfile = "$path/$dfname";
foreach $dfname (sort @alldelayed) {	my ($host_id) = ($dfname =~ /\.([^.]*)$/);
$reqfile = "$path/$dfname";	Debug(4, "queueing ".$reqfile." for $host_id");
Debug(4, "queueing ".$reqfile);
my $Handle = IO::File->new($reqfile);	my $Handle = IO::File->new($reqfile);
my $cmd = <$Handle>;	my $cmd = <$Handle>;
chomp $cmd; # There may or may not be a newline...	chomp $cmd; # There may or may not be a newline...
$cmd = $cmd."\n"; # now for sure there's exactly one newline.	$cmd = $cmd."\n"; # now for sure there's exactly one newline.
my $Transaction = LondTransaction->new($cmd);	my $Transaction = LondTransaction->new("sethost:$host_id:$cmd");
$Transaction->SetDeferred($reqfile);	$Transaction->SetDeferred($reqfile);
QueueTransaction($Transaction);	QueueTransaction($Transaction);
}	}
Line 1200 sub MakeLondConnection {	Line 1207 sub MakeLondConnection {
.GetServerPort());	.GetServerPort());

my $Connection = LondConnection->new(&GetServerHost(),	my $Connection = LondConnection->new(&GetServerHost(),
&GetServerPort());	&GetServerPort(),
	&GetHostId());

if($Connection eq undef) { # Needs to be more robust later.	if($Connection eq undef) {
Log("CRITICAL","Failed to make a connection with lond.");	Log("CRITICAL","Failed to make a connection with lond.");
$ConnectionRetriesLeft--;	$ConnectionRetriesLeft--;
return 0; # Failure.	return 0; # Failure.
} else {	} else {

	$LondConnecting = 1; # Connection in progress.
# The connection needs to have writability	# The connection needs to have writability
# monitored in order to send the init sequence	# monitored in order to send the init sequence
# that starts the whole authentication/key	# that starts the whole authentication/key
Line 1232 sub MakeLondConnection {	Line 1241 sub MakeLondConnection {
&SetupTimer; # Need to handle timeouts with connections...	&SetupTimer; # Need to handle timeouts with connections...
}	}
$ConnectionCount++;	$ConnectionCount++;
	$Connection->SetClientData($ConnectionCount);
Debug(4, "Connection count = ".$ConnectionCount);	Debug(4, "Connection count = ".$ConnectionCount);
if($ConnectionCount == 1) { # First Connection:	if($ConnectionCount == 1) { # First Connection:
QueueDelayed;	QueueDelayed;
}	}
Log("SUCESS", "Created connection ".$ConnectionCount	Log("SUCESS", "Created connection ".$ConnectionCount
." to host ".GetServerHost());	." to host ".GetServerHost());
$LondConnecting = 1; # Connection in progress.
return 1; # Return success.	return 1; # Return success.
}	}

Line 1344 sub QueueTransaction {	Line 1353 sub QueueTransaction {
}	}
}	}

#-------------------------- Lonc UNIX socket handling ---------------------	#-------------------------- Lonc UNIX socket handling -------------------

=pod	=pod

=head2 ClientRequest	=head2 ClientRequest
Line 1379 sub ClientRequest {	Line 1387 sub ClientRequest {
$data = $data.$thisread; # Append new data.	$data = $data.$thisread; # Append new data.
$watcher->data($data);	$watcher->data($data);
if($data =~ /\n$/) { # Request entirely read.	if($data =~ /\n$/) { # Request entirely read.
if($data eq "close_connection_exit\n") {	if ($data eq "close_connection_exit\n") {
Log("CRITICAL",	Log("CRITICAL",
"Request Close Connection ... exiting");	"Request Close Connection ... exiting");
CloseAllLondConnections();	CloseAllLondConnections();
exit;	exit;
	} elsif ($data eq "reset_retries\n") {
	Log("INFO", "Resetting Connection Retries.");
	$ConnectionRetriesLeft = $ConnectionRetries;
	&UpdateStatus();
	my $Transaction = LondTransaction->new($data);
	$Transaction->SetClient($socket);
	StartClientReply($Transaction, "ok\n");
	$watcher->cancel();
	return;
}	}
Debug(8, "Complete transaction received: ".$data);	Debug(8, "Complete transaction received: ".$data);
if($LogTransactions) {	if ($LogTransactions) {
Log("SUCCESS", "Transaction: '$data'"); # Transaction has \n.	Log("SUCCESS", "Transaction: '$data'"); # Transaction has \n.
}	}
my $Transaction = LondTransaction->new($data);	my $Transaction = LondTransaction->new($data);
Line 1401 sub ClientRequest {	Line 1418 sub ClientRequest {
# Accept a connection request for a client (lonc child) and	# Accept a connection request for a client (lonc child) and
# start up an event watcher to keep an eye on input from that	# start up an event watcher to keep an eye on input from that
# Event. This can be called both from NewClient and from	# Event. This can be called both from NewClient and from
# ChildProcess if we are started in DieWhenIdle mode.	# ChildProcess.
# Parameters:	# Parameters:
# $socket - The listener socket.	# $socket - The listener socket.
# Returns:	# Returns:
Line 1490 sub GetServerHost {	Line 1507 sub GetServerHost {

=pod	=pod

	=head2 GetServerId

	Returns the hostid whose lond we talk with.

	=cut

	sub GetHostId {
	return $RemoteHostId; # Setup by the fork.
	}

	=pod

=head2 GetServerPort	=head2 GetServerPort

Returns the lond port number.	Returns the lond port number.
Line 1517 another event handler to subess requests	Line 1546 another event handler to subess requests
=cut	=cut

sub SetupLoncListener {	sub SetupLoncListener {
	my ($host,$SocketName) = @_;
	if (!$host) { $host = &GetServerHost(); }
	if (!$SocketName) { $SocketName = &GetLoncSocketPath($host); }

my $host = GetServerHost(); # Default host.
if (@_) {
($host) = @_ # Override host with parameter.
}

my $socket;
my $SocketName = GetLoncSocketPath($host);
unlink($SocketName);	unlink($SocketName);

	my $socket;
unless ($socket =IO::Socket::UNIX->new(Local => $SocketName,	unless ($socket =IO::Socket::UNIX->new(Local => $SocketName,
Listen => 250,	Listen => 250,
Type => SOCK_STREAM)) {	Type => SOCK_STREAM)) {
Line 1654 Optional parameter:	Line 1682 Optional parameter:
=cut	=cut

sub ChildProcess {	sub ChildProcess {
# If we are in DieWhenIdle mode, we've inherited all the	# We've inherited all the
# events of our parent and those have to be cancelled or else	# events of our parent and those have to be cancelled or else
# all holy bloody chaos will result.. trust me, I already made	# all holy bloody chaos will result.. trust me, I already made
# >that< mistake.	# >that< mistake.
Line 1706 sub ChildProcess {	Line 1734 sub ChildProcess {
cb => \&ToggleDebug,	cb => \&ToggleDebug,
data => "INT");	data => "INT");

	# Block the pipe signal we'll get when the socket disconnects. We detect
	# socket disconnection via send/receive failures. On disconnect, the
	# socket becomes readable .. which will force the disconnect detection.

	my $set = POSIX::SigSet->new(SIGPIPE);
	sigprocmask(SIG_BLOCK, $set);

# Figure out if we got passed a socket or need to open one to listen for	# Figure out if we got passed a socket or need to open one to listen for
# client requests.	# client requests.

Line 1722 sub ChildProcess {	Line 1757 sub ChildProcess {
desc => 'Lonc Listener Unix Socket',	desc => 'Lonc Listener Unix Socket',
fd => $socket);	fd => $socket);

$Event::Debuglevel = $DebugLevel;	$Event::DebugLevel = $DebugLevel;

Debug(9, "Making initial lond connection for ".$RemoteHost);	Debug(9, "Making initial lond connection for ".$RemoteHost);

Line 1730 sub ChildProcess {	Line 1765 sub ChildProcess {

# &MakeLondConnection(); // let first work request do it.	# &MakeLondConnection(); // let first work request do it.

# If We are in diwhenidle, need to accept the connection since the	# need to accept the connection since the event may not fire.
# event may not fire.

if ($DieWhenIdle) {	&accept_client($socket);
&accept_client($socket);
}

Debug(9,"Entering event loop");	Debug(9,"Entering event loop");
my $ret = Event::loop(); # Start the main event loop.	my $ret = Event::loop(); # Start the main event loop.
Line 1747 sub ChildProcess {	Line 1779 sub ChildProcess {
# Create a new child for host passed in:	# Create a new child for host passed in:

sub CreateChild {	sub CreateChild {
my ($host, $socket) = @_;	my ($host, $hostid) = @_;

my $sigset = POSIX::SigSet->new(SIGINT);	my $sigset = POSIX::SigSet->new(SIGINT);
sigprocmask(SIG_BLOCK, $sigset);	sigprocmask(SIG_BLOCK, $sigset);
$RemoteHost = $host;	$RemoteHost = $host;
	ShowStatus('Parent keeping the flock'); # Update time in status message.
Log("CRITICAL", "Forking server for ".$host);	Log("CRITICAL", "Forking server for ".$host);
my $pid = fork;	my $pid = fork;
if($pid) { # Parent	if($pid) { # Parent
$RemoteHost = "Parent";	$RemoteHost = "Parent";
$ChildHash{$pid} = $host;	$ChildPid{$pid} = $host;
$HostToPid{$host}= $pid;
sigprocmask(SIG_UNBLOCK, $sigset);	sigprocmask(SIG_UNBLOCK, $sigset);
	undef(@all_host_ids);
} else { # child.	} else { # child.
	$RemoteHostId = $hostid;
ShowStatus("Connected to ".$RemoteHost);	ShowStatus("Connected to ".$RemoteHost);
$SIG{INT} = 'DEFAULT';	$SIG{INT} = 'DEFAULT';
sigprocmask(SIG_UNBLOCK, $sigset);	sigprocmask(SIG_UNBLOCK, $sigset);
if(defined $socket) {	&ChildProcess(); # Does not return.
&ChildProcess($socket);
} else {
ChildProcess; # Does not return.
}
}	}
}	}

Line 1796 sub parent_client_connection {	Line 1825 sub parent_client_connection {
my ($event) = @_;	my ($event) = @_;
my $watcher = $event->w;	my $watcher = $event->w;
my $socket = $watcher->fd;	my $socket = $watcher->fd;
	my $connection = $socket->accept(); # Accept the client connection.
# Lookup the host associated with this socket:	Event->io(cb => \&get_remote_hostname,
	poll => 'r',
my $host = $listening_to{$socket};	data => "",
	fd => $connection);
# Start the child:	}
	}

	sub get_remote_hostname {
&Debug(9,"Creating child for $host (parent_client_connection)");	my ($event) = @_;
&CreateChild($host, $socket);	my $watcher = $event->w;
	my $socket = $watcher->fd;
# Clean up the listen since now the child takes over until it exits.
	my $thisread;
$watcher->cancel(); # Nolonger listening to this event	my $rv = $socket->recv($thisread, POSIX::BUFSIZ, 0);
delete($listening_to{$socket});	Debug(8, "rcv: data length = ".length($thisread)." read =".$thisread);
delete($parent_dispatchers{$host});	if (!defined($rv) \|\| length($thisread) == 0) {
$socket->close();	# Likely eof on socket.
	Debug(5,"Client Socket closed on lonc for p_c_c");
	close($socket);
	$watcher->cancel();
	return;
	}

	my $data = $watcher->data().$thisread;
	$watcher->data($data);
	if($data =~ /\n$/) { # Request entirely read.
	chomp($data);
	} else {
	return;
	}

	&Debug(5,"Creating child for $data (parent_client_connection)");
	(my $hostname,my $lonid,@all_host_ids) = split(':',$data);
	$ChildHost{$hostname}++;
	if ($ChildHost{$hostname} == 1) {
	&CreateChild($hostname,$lonid);
	} else {
	&Log('WARNING',"Request for a second child on $hostname");
}	}
	# Clean up the listen since now the child takes over until it exits.
	$watcher->cancel(); # Nolonger listening to this event
	$socket->send("done\n");
	$socket->close();
}	}

# parent_listen:	# parent_listen:
Line 1836 sub parent_listen {	Line 1890 sub parent_listen {
my ($loncapa_host) = @_;	my ($loncapa_host) = @_;
Debug(5, "parent_listen: $loncapa_host");	Debug(5, "parent_listen: $loncapa_host");

my $socket = &SetupLoncListener($loncapa_host);	my ($socket,$file);
	if (!$loncapa_host) {
	$loncapa_host = 'common_parent';
	$file = $perlvar{'lonSockCreate'};
	} else {
	$file = &GetLoncSocketPath($loncapa_host);
	}
	$socket = &SetupLoncListener($loncapa_host,$file);

$listening_to{$socket} = $loncapa_host;	$listening_to{$socket} = $loncapa_host;
if (!$socket) {	if (!$socket) {
die "Unable to create a listen socket for $loncapa_host";	die "Unable to create a listen socket for $loncapa_host";
}	}

my $lock_file = &GetLoncSocketPath($loncapa_host).".lock";	my $lock_file = $file.".lock";
unlink($lock_file); # No problem if it doesn't exist yet [startup e.g.]	unlink($lock_file); # No problem if it doesn't exist yet [startup e.g.]

my $watcher = Event->io(cb => \&parent_client_connection,	my $watcher =
poll => 'r',	Event->io(cb => \&parent_client_connection,
desc => "Parent listener unix socket ($loncapa_host)",	poll => 'r',
fd => $socket);	desc => "Parent listener unix socket ($loncapa_host)",
	data => "",
	fd => $socket);
$parent_dispatchers{$loncapa_host} = $watcher;	$parent_dispatchers{$loncapa_host} = $watcher;

}	}

	sub parent_clean_up {
	my ($loncapa_host) = @_;
	Debug(1, "parent_clean_up: $loncapa_host");

	my $socket_file = &GetLoncSocketPath($loncapa_host);
	unlink($socket_file); # No problem if it doesn't exist yet [startup e.g.]
	my $lock_file = $socket_file.".lock";
	unlink($lock_file); # No problem if it doesn't exist yet [startup e.g.]
	}


# listen_on_all_unix_sockets:
# This sub initiates a listen on all unix domain lonc client sockets.	# This sub initiates a listen on the common unix domain lonc client socket.
# This will be called in the case where we are trimming idle processes.	# loncnew starts up with no children, and only spawns off children when a
# When idle processes are trimmed, loncnew starts up with no children,	# connection request occurs on the common client unix socket. The spawned
# and only spawns off children when a connection request occurs on the	# child continues to run until it has been idle a while at which point it
# client unix socket. The spawned child continues to run until it has	# eventually exits and once more the parent picks up the listen.
# been idle a while at which point it eventually exits and once more
# the parent picks up the listen.
#	#
# Parameters:	# Parameters:
# NONE	# NONE
Line 1870 sub parent_listen {	Line 1942 sub parent_listen {
# Returns:	# Returns:
# NONE	# NONE
#	#
sub listen_on_all_unix_sockets {	sub listen_on_common_socket {
Debug(5, "listen_on_all_unix_sockets");	Debug(5, "listen_on_common_socket");
my $host_iterator = &LondConnection::GetHostIterator();	&parent_listen();
while (!$host_iterator->end()) {
my $host_entry_ref = $host_iterator->get();
my $host_name = $host_entry_ref->[0];
Debug(9, "Listen for $host_name");
&parent_listen($host_name);
$host_iterator->next();
}
}	}

# server_died is called whenever a child process exits.	# server_died is called whenever a child process exits.
Line 1901 sub server_died {	Line 1966 sub server_died {
}	}
# need the host to restart:	# need the host to restart:

my $host = $ChildHash{$pid};	my $host = $ChildPid{$pid};
if($host) { # It's for real...	if($host) { # It's for real...
&Debug(9, "Caught sigchild for $host");	&Debug(9, "Caught sigchild for $host");
delete($ChildHash{$pid});	delete($ChildPid{$pid});
delete($HostToPid{$host});	delete($ChildHost{$host});
&parent_listen($host);	&parent_clean_up($host);

} else {	} else {
&Debug(5, "Caught sigchild for pid not in hosts hash: $pid");	&Debug(5, "Caught sigchild for pid not in hosts hash: $pid");
Line 1963 ShowStatus("Forking node servers");	Line 2028 ShowStatus("Forking node servers");
Log("CRITICAL", "--------------- Starting children ---------------");	Log("CRITICAL", "--------------- Starting children ---------------");

LondConnection::ReadConfig; # Read standard config files.	LondConnection::ReadConfig; # Read standard config files.
my $HostIterator = LondConnection::GetHostIterator;

if ($DieWhenIdle) {	$RemoteHost = "[parent]";
$RemoteHost = "[parent]";	&listen_on_common_socket();
&listen_on_all_unix_sockets();
} else {

while (! $HostIterator->end()) {

my $hostentryref = $HostIterator->get();
CreateChild($hostentryref->[0]);
$HostHash{$hostentryref->[0]} = $hostentryref->[4];
$HostIterator->next();
}
}

$RemoteHost = "Parent Server";	$RemoteHost = "Parent Server";

Line 1986 $RemoteHost = "Parent Server";	Line 2039 $RemoteHost = "Parent Server";
ShowStatus("Parent keeping the flock");	ShowStatus("Parent keeping the flock");


if ($DieWhenIdle) {	# We need to setup a SIGChild event to handle the exit (natural or otherwise)
# We need to setup a SIGChild event to handle the exit (natural or otherwise)	# of the children.
# of the children.

Event->signal(cb => \&server_died,
desc => "Child exit handler",
signal => "CHLD");


# Set up all the other signals we set up. We'll vector them off to the
# same subs as we would for DieWhenIdle false and, if necessary, conditionalize
# the code there.

$parent_handlers{INT} = Event->signal(cb => \&Terminate,
desc => "Parent INT handler",
signal => "INT");
$parent_handlers{TERM} = Event->signal(cb => \&Terminate,
desc => "Parent TERM handler",
signal => "TERM");
$parent_handlers{HUP} = Event->signal(cb => \&Restart,
desc => "Parent HUP handler.",
signal => "HUP");
$parent_handlers{USR1} = Event->signal(cb => \&CheckKids,
desc => "Parent USR1 handler",
signal => "USR1");
$parent_handlers{USR2} = Event->signal(cb => \&UpdateKids,
desc => "Parent USR2 handler.",
signal => "USR2");

# Start procdesing events.

$Event::DebugLevel = $DebugLevel;
Debug(9, "Parent entering event loop");
my $ret = Event::loop();
die "Main Event loop exited: $ret";


} else {
#
# Set up parent signals:
#

$SIG{INT} = \&Terminate;
$SIG{TERM} = \&Terminate;
$SIG{HUP} = \&Restart;
$SIG{USR1} = \&CheckKids;
$SIG{USR2} = \&UpdateKids; # LonManage update request.

while(1) {
my $deadchild = wait();
if(exists $ChildHash{$deadchild}) { # need to restart.
my $deadhost = $ChildHash{$deadchild};
delete($HostToPid{$deadhost});
delete($ChildHash{$deadchild});
Log("WARNING","Lost child pid= ".$deadchild.
"Connected to host ".$deadhost);
Log("INFO", "Restarting child procesing ".$deadhost);
CreateChild($deadhost);
}
}
}

	Event->signal(cb => \&server_died,
	desc => "Child exit handler",
	signal => "CHLD");


	# Set up all the other signals we set up.

	$parent_handlers{INT} = Event->signal(cb => \&Terminate,
	desc => "Parent INT handler",
	signal => "INT");
	$parent_handlers{TERM} = Event->signal(cb => \&Terminate,
	desc => "Parent TERM handler",
	signal => "TERM");
	$parent_handlers{HUP} = Event->signal(cb => \&KillThemAll,
	desc => "Parent HUP handler.",
	signal => "HUP");
	$parent_handlers{USR1} = Event->signal(cb => \&CheckKids,
	desc => "Parent USR1 handler",
	signal => "USR1");
	$parent_handlers{USR2} = Event->signal(cb => \&UpdateKids,
	desc => "Parent USR2 handler.",
	signal => "USR2");

	# Start procdesing events.

	$Event::DebugLevel = $DebugLevel;
	Debug(9, "Parent entering event loop");
	my $ret = Event::loop();
	die "Main Event loop exited: $ret";

=pod	=pod

Line 2071 sub CheckKids {	Line 2094 sub CheckKids {
foreach my $host (keys %parent_dispatchers) {	foreach my $host (keys %parent_dispatchers) {
print $fh "LONC Parent process listening for $host\n";	print $fh "LONC Parent process listening for $host\n";
}	}
foreach my $pid (keys %ChildHash) {	foreach my $pid (keys %ChildPid) {
Debug(2, "Sending USR1 -> $pid");	Debug(2, "Sending USR1 -> $pid");
kill 'USR1' => $pid; # Tell Child to report status.	kill 'USR1' => $pid; # Tell Child to report status.
}	}
Line 2115 sub UpdateKids {	Line 2138 sub UpdateKids {
# The down side is transactions that are in flight will get timed out	# The down side is transactions that are in flight will get timed out
# (lost unless they are critical).	# (lost unless they are critical).

&Restart();	&KillThemAll();

}	}


Line 2149 SIGHUP. Responds to sigint and sigterm.	Line 2171 SIGHUP. Responds to sigint and sigterm.

sub KillThemAll {	sub KillThemAll {
Debug(2, "Kill them all!!");	Debug(2, "Kill them all!!");
local($SIG{CHLD}) = 'IGNORE'; # Our children >will< die.
foreach my $pid (keys %ChildHash) {	#local($SIG{CHLD}) = 'IGNORE';
my $serving = $ChildHash{$pid};	# Our children >will< die.
	# but we need to catch their death and cleanup after them in case this is
	# a restart set of kills
	my @allpids = keys(%ChildPid);
	foreach my $pid (@allpids) {
	my $serving = $ChildPid{$pid};
ShowStatus("Nicely Killing lonc for $serving pid = $pid");	ShowStatus("Nicely Killing lonc for $serving pid = $pid");
Log("CRITICAL", "Nicely Killing lonc for $serving pid = $pid");	Log("CRITICAL", "Nicely Killing lonc for $serving pid = $pid");
kill 'QUIT' => $pid;	kill 'QUIT' => $pid;
}	}
	ShowStatus("Finished killing child processes off.");

}	}


Line 2169 sub really_kill_them_all_dammit	Line 2195 sub really_kill_them_all_dammit
{	{
Debug(2, "Kill them all Dammit");	Debug(2, "Kill them all Dammit");
local($SIG{CHLD} = 'IGNORE'); # In case some purist reenabled them.	local($SIG{CHLD} = 'IGNORE'); # In case some purist reenabled them.
foreach my $pid (keys %ChildHash) {	foreach my $pid (keys %ChildPid) {
my $serving = $ChildHash{$pid};	my $serving = $ChildPid{$pid};
&ShowStatus("Nastily killing lonc for $serving pid = $pid");	&ShowStatus("Nastily killing lonc for $serving pid = $pid");
Log("CRITICAL", "Nastily killing lonc for $serving pid = $pid");	Log("CRITICAL", "Nastily killing lonc for $serving pid = $pid");
kill 'KILL' => $pid;	kill 'KILL' => $pid;
delete($ChildHash{$pid});	delete($ChildPid{$pid});
my $execdir = $perlvar{'lonDaemons'};	my $execdir = $perlvar{'lonDaemons'};
unlink("$execdir/logs/lonc.pid");	unlink("$execdir/logs/lonc.pid");
}	}
Line 2202 sub Terminate {	Line 2228 sub Terminate {
exit 0;	exit 0;

}	}

	sub my_hostname {
	use Sys::Hostname;
	my $name = &hostname();
	&Debug(9,"Name is $name");
	return $name;
	}

=pod	=pod

=head1 Theory	=head1 Theory
Line 2243 A hash of lond connections that have no	Line 2277 A hash of lond connections that have no
can be closed if they are idle for a long enough time.	can be closed if they are idle for a long enough time.

=cut	=cut

	=pod

	=head1 Log messages

	The following is a list of log messages that can appear in the
	lonc.log file. Each log file has a severity and a message.

	=over 2

	=item Warning A socket timeout was detected

	If there are pending transactions in the socket's queue,
	they are failed (saved if critical). If the connection
	retry count gets exceeded by this, the
	remote host is marked as dead.
	Called when timeouts occured during the connection and
	connection dialog with a remote host.

	=item Critical Host makred DEAD <hostname>

	The numer of retry counts for contacting a host was
	exceeded. The host is marked dead an no
	further attempts will be made by that child.

	=item Info lonc pipe client hung up on us

	Write to the client pipe indicated no data transferred
	Socket to remote host is shut down. Reply to the client
	is discarded. Note: This is commented out in &ClientWriteable

	=item Success Reply from lond: <data>

	Can be enabled for debugging by setting LogTransactions to nonzero.
	Indicates a successful transaction with lond, <data> is the data received
	from the remote lond.

	=item Success A delayed transaction was completed

	A transaction that must be reliable was executed and completed
	as lonc restarted. This is followed by a mesage of the form

	S: client-name : request

	=item WARNING Failing transaction <cmd>:<subcmd>

	Transaction failed on a socket, but the failure retry count for the remote
	node has not yet been exhausted (the node is not yet marked dead).
	cmd is the command, subcmd is the subcommand. This results from a con_lost
	when communicating with lond.

	=item WARNING Shutting down a socket

	Called when a socket is being closed to lond. This is emitted both when
	idle pruning is being done and when the socket has been disconnected by the remote.

	=item WARNING Lond connection lost.

	Called when a read from lond's socket failed indicating lond has closed the
	connection or died. This should be followed by one or more

	"WARNING Failing transaction..." msgs for each in-flight or queued transaction.

	=item INFO Connected to lond version: <version>

	When connection negotiation is complete, the lond version is requested and logged here.

	=item SUCCESS Connection n to host now ready for action

	Emitted when connection has been completed with lond. n is then number of
	concurrent connections and host, the host to which the connection has just
	been established.

	=item WARNING Connection to host has been disconnected

	Write to a lond resulted in failure status. Connection to lond is dropped.

	=item SUCCESS Created connection n to host host

	Initial connection request to host..(before negotiation).

	=item CRITICAL Request Close Connection ... exiting

	Client has sent "close_connection_exit" The loncnew server is exiting.

	=item INFO Resetting Connection Retries

	Client has sent "reset_retries" The lond connection retries are reset to zero for the
	corresponding lond.

	=item SUCCESS Transaction <data>

	Only emitted if the global variable $LogTransactions was set to true.
	A client has requested a lond transaction <data> is the contents of the request.

	=item SUCCESS Toggled transaction logging <LogTransactions>

	The state of the $LogTransactions global has been toggled, and its current value
	(after being toggled) is displayed. When non zero additional logging of transactions
	is enabled for debugging purposes. Transaction logging is toggled on receipt of a USR2
	signal.

	=item CRITICAL Abnormal exit. Child <pid> for <host> died thorugh signal.

	QUIT signal received. lonc child process is exiting.

	=item SUCCESS New debugging level for <RemoteHost> now <DebugLevel>

	Debugging toggled for the host loncnew is talking with.
	Currently debugging is a level based scheme with higher number
	conveying more information. The daemon starts out at
	DebugLevel 0 and can toggle back and forth between that and
	DebugLevel 2 These are controlled by
	the global variables $DebugLevel and $NextDebugLevel
	The debug level can go up to 9.
	SIGINT toggles the debug level. The higher the debug level the
	more debugging information is spewed. See the Debug
	sub in loncnew.

	=item CRITICAL Forking server for host

	A child is being created to service requests for the specified host.


	=item WARNING Request for a second child on hostname

	Somehow loncnew was asked to start a second child on a host that already had a child
	servicing it. This request is not honored, but themessage is emitted. This could happen
	due to a race condition. When a client attempts to contact loncnew for a new host, a child
	is forked off to handle the requests for that server. The parent then backs off the Unix
	domain socket leaving it for the child to service all requests. If in the time between
	creating the child, and backing off, a new connection request comes in to the unix domain
	socket, this could trigger (unlikely but remotely possible),.

	=item CRITICAL ------ Starting Children ----

	This message should probably be changed to "Entering event loop" as the loncnew only starts
	children as needed. This message is emitted as new events are established and
	the event processing loop is entered.

	=item INFO Updating connections via SIGUSR2

	SIGUSR2 received. The original code would kill all clients, re-read the host file,
	then restart children for each host. Now that childrean aree started on demand, this
	just kills all child processes and lets requests start them as needed again.


	=item CRITICAL Restarting

	SigHUP received. all the children are killed and the script exec's itself to start again.

	=item CRITICAL Nicely killing lonc for host pid = <pid>

	Attempting to kill the child that is serving the specified host (pid given) cleanly via
	SIGQUIT The child should handle that, clean up nicely and exit.

	=item CRITICAL Nastily killing lonc for host pid = <pid>

	The child specified did not die when requested via SIGQUIT. Therefore it is killed
	via SIGKILL.

	=item CRITICAL Asked to kill children.. first be nice..

	In the parent's INT handler. INT kills the child processes. This inidicate loncnew
	is about to attempt to kill all known children via SIGQUIT. This message should be followed
	by one "Nicely killing" message for each extant child.

	=item CRITICAL Now kill children nasty

	In the parent's INT handler. remaining children are about to be killed via
	SIGKILL. Should be followed by a Nastily killing... for each lonc child that
	refused to die.

	=item CRITICAL Master process exiting

	In the parent's INT handler. just prior to the exit 0 call.

	=back

	=cut

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>

Removed from v.1.71
changed lines
	Added in v.1.95