--- loncom/loncnew 2003/06/11 02:04:35 1.8
+++ loncom/loncnew 2003/12/15 23:30:57 1.36
@@ -2,13 +2,12 @@
# The LearningOnline Network with CAPA
# lonc maintains the connections to remote computers
#
-# $Id: loncnew,v 1.8 2003/06/11 02:04:35 foxr Exp $
+# $Id: loncnew,v 1.36 2003/12/15 23:30:57 albertel Exp $
#
# Copyright Michigan State University Board of Trustees
#
# This file is part of the LearningOnline Network with CAPA (LON-CAPA).
-#
-# LON-CAPA is free software; you can redistribute it and/or modify
+## LON-CAPA is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
@@ -27,7 +26,7 @@
# http://www.lon-capa.org/
#
#
-# new lonc handles n requestors spread out bver m connections to londs.
+# new lonc handles n request out bver m connections to londs.
# This module is based on the Event class.
# Development iterations:
# - Setup basic event loop. (done)
@@ -41,27 +40,18 @@
# - Add Configuration file I/O (done).
# - Add management/status request interface.
# - Add deferred request capability. (done)
+# - Detect transmission timeouts.
#
-# Change log:
-# $Log: loncnew,v $
-# Revision 1.8 2003/06/11 02:04:35 foxr
-# Support delayed transactions... this is done uniformly by encapsulating
-# transactions in an object ... a LondTransaction that is implemented by
-# LondTransaction.pm
-#
-# Revision 1.7 2003/06/03 01:59:39 foxr
-# complete coding to support deferred transactions.
-#
-#
-
+use strict;
use lib "/home/httpd/lib/perl/";
-use lib "/home/foxr/newloncapa/types";
use Event qw(:DEFAULT );
use POSIX qw(:signal_h);
+use POSIX;
use IO::Socket;
use IO::Socket::INET;
use IO::Socket::UNIX;
+use IO::File;
use IO::Handle;
use Socket;
use Crypt::IDEA;
@@ -72,17 +62,10 @@ use LONCAPA::LondTransaction;
use LONCAPA::Configuration;
use LONCAPA::HashIterator;
-print "Loncnew starting\n";
#
# Disable all signals we might receive from outside for now.
#
-$SIG{QUIT} = IGNORE;
-$SIG{HUP} = IGNORE;
-$SIG{USR1} = IGNORE;
-$SIG{INT} = IGNORE;
-$SIG{CHLD} = IGNORE;
-$SIG{__DIE__} = IGNORE;
# Read the httpd configuration file to get perl variables
@@ -95,35 +78,113 @@ my %perlvar = %{$perlvarref};
# parent and shared variables.
my %ChildHash; # by pid -> host.
+my %HostToPid; # By host -> pid.
+my %HostHash; # by loncapaname -> IP.
-my $MaxConnectionCount = 5; # Will get from config later.
+my $MaxConnectionCount = 10; # Will get from config later.
my $ClientConnection = 0; # Uniquifier for client events.
-my $DebugLevel = 2;
+my $DebugLevel = 0;
+my $NextDebugLevel= 2; # So Sigint can toggle this.
my $IdleTimeout= 3600; # Wait an hour before pruning connections.
#
# The variables below are only used by the child processes.
#
my $RemoteHost; # Name of host child is talking to.
-my $UnixSocketDir= "/home/httpd/sockets";
+my $UnixSocketDir= $perlvar{'lonSockDir'};
my $IdleConnections = Stack->new(); # Set of idle connections
my %ActiveConnections; # Connections to the remote lond.
my %ActiveTransactions; # LondTransactions in flight.
my %ActiveClients; # Serial numbers of active clients by socket.
my $WorkQueue = Queue->new(); # Queue of pending transactions.
-# my $ClientQueue = Queue->new(); # Queue of clients causing xactinos.
my $ConnectionCount = 0;
my $IdleSeconds = 0; # Number of seconds idle.
+my $Status = ""; # Current status string.
+my $RecentLogEntry = "";
+my $ConnectionRetries=2; # Number of connection retries allowed.
+my $ConnectionRetriesLeft=2; # Number of connection retries remaining.
#
-# This disconnected socket makes posible a bit more regular
-# code when processing delayed requests:
-#
-my $NullSocket = IO::Socket->new();
+# The hash below gives the HTML format for log messages
+# given a severity.
+#
+my %LogFormats;
+
+$LogFormats{"CRITICAL"} = "CRITICAL: %s";
+$LogFormats{"SUCCESS"} = "SUCCESS: %s";
+$LogFormats{"INFO"} = "INFO: %s";
+$LogFormats{"WARNING"} = "WARNING: %s";
+$LogFormats{"DEFAULT"} = " %s ";
+
+
+
+=pod
+
+=head2 LogPerm
+
+Makes an entry into the permanent log file.
+
+=cut
+sub LogPerm {
+ my $message=shift;
+ my $execdir=$perlvar{'lonDaemons'};
+ my $now=time;
+ my $local=localtime($now);
+ my $fh=IO::File->new(">>$execdir/logs/lonnet.perm.log");
+ print $fh "$now:$message:$local\n";
+}
+
+=pod
+
+=head2 Log
+
+Logs a message to the log file.
+Parameters:
+
+=item severity
+
+One of CRITICAL, WARNING, INFO, SUCCESS used to select the
+format string used to format the message. if the severity is
+not a defined severity the Default format string is used.
+
+=item message
+
+The base message. In addtion to the format string, the message
+will be appended to a string containing the name of our remote
+host and the time will be formatted into the message.
+
+=cut
+
+sub Log {
+ my $severity = shift;
+ my $message = shift;
+
+ if(!$LogFormats{$severity}) {
+ $severity = "DEFAULT";
+ }
+
+ my $format = $LogFormats{$severity};
+
+ # Put the window dressing in in front of the message format:
+
+ my $now = time;
+ my $local = localtime($now);
+ my $finalformat = "$local ($$) [$RemoteHost] [$Status] ";
+ my $finalformat = $finalformat.$format."\n";
+
+ # open the file and put the result.
+
+ my $execdir = $perlvar{'lonDaemons'};
+ my $fh = IO::File->new(">>$execdir/logs/lonc.log");
+ my $msg = sprintf($finalformat, $message);
+ $RecentLogEntry = $msg;
+ print $fh $msg;
+
+
+}
-#
=pod
@@ -141,7 +202,7 @@ sub GetPeername {
my $peerip;
if($AdrFamily == AF_INET) {
($peerport, $peerip) = sockaddr_in($peer);
- my $peername = gethostbyaddr($iaddr, $AdrFamily);
+ my $peername = gethostbyaddr($peerip, $AdrFamily);
return $peername;
} elsif ($AdrFamily == AF_UNIX) {
my $peerfile;
@@ -149,7 +210,6 @@ sub GetPeername {
return $peerfile;
}
}
-#----------------------------- Timer management ------------------------
=pod
=head2 Debug
@@ -162,7 +222,7 @@ sub Debug {
my $level = shift;
my $message = shift;
if ($level <= $DebugLevel) {
- print $message." host = ".$RemoteHost."\n";
+ Log("INFO", "-Debug- $message host = $RemoteHost");
}
}
@@ -179,12 +239,34 @@ sub SocketDump {
=head2 ShowStatus
Place some text as our pid status.
+ and as what we return in a SIGUSR1
=cut
sub ShowStatus {
- my $status = shift;
- $0 = "lonc: ".$status;
+ my $state = shift;
+ my $now = time;
+ my $local = localtime($now);
+ $Status = $local.": ".$state;
+ $0='lonc: '.$state.' '.$local;
+}
+
+=pod
+
+=head 2 SocketTimeout
+
+ Called when an action on the socket times out. The socket is
+ destroyed and any active transaction is failed.
+
+
+=cut
+sub SocketTimeout {
+ my $Socket = shift;
+
+ KillSocket($Socket); # A transaction timeout also counts as
+ # a connection failure:
+ $ConnectionRetriesLeft--;
}
+#----------------------------- Timer management ------------------------
=pod
@@ -197,11 +279,11 @@ Invoked each timer tick.
sub Tick {
my $client;
- ShowStatus(GetServerHost()." Connection count: ".$ConnectionCount);
- Debug(6, "Tick");
- Debug(6, " Current connection count: ".$ConnectionCount);
- foreach $client (keys %ActiveClients) {
- Debug(7, " Have client: with id: ".$ActiveClients{$client});
+ if($ConnectionRetriesLeft > 0) {
+ ShowStatus(GetServerHost()." Connection count: ".$ConnectionCount
+ ." Retries remaining: ".$ConnectionRetriesLeft);
+ } else {
+ ShowStatus(GetServerHost()." >> DEAD <<");
}
# Is it time to prune connection count:
@@ -210,24 +292,45 @@ sub Tick {
($WorkQueue->Count() == 0)) { # Idle connections and nothing to do?
$IdleSeconds++;
if($IdleSeconds > $IdleTimeout) { # Prune a connection...
- $Socket = $IdleConnections->pop();
+ my $Socket = $IdleConnections->pop();
KillSocket($Socket);
}
} else {
$IdleSeconds = 0; # Reset idle count if not idle.
}
+ #
+ # For each inflight transaction, tick down its timeout counter.
+ #
+ foreach my $item (keys %ActiveConnections) {
+ my $State = $ActiveConnections{$item}->data->GetState();
+ if ($State ne 'Idle') {
+ Debug(5,"Ticking Socket $State $item");
+ $ActiveConnections{$item}->data->Tick();
+ }
+ }
# Do we have work in the queue, but no connections to service them?
# If so, try to make some new connections to get things going again.
#
my $Requests = $WorkQueue->Count();
- if (($ConnectionCount == 0) && ($Requests > 0)) {
- my $Connections = ($Requests <= $MaxConnectionCount) ?
- $Requests : $MaxConnectionCount;
- Debug(1,"Work but no connections, starting ".$Connections." of them");
- for ($i =0; $i < $Connections; $i++) {
- MakeLondConnection();
+ if (($ConnectionCount == 0) && ($Requests > 0)) {
+ if ($ConnectionRetriesLeft > 0) {
+ my $Connections = ($Requests <= $MaxConnectionCount) ?
+ $Requests : $MaxConnectionCount;
+ Debug(5,"Work but no connections, start ".$Connections." of them");
+ my $successCount = 0;
+ for (my $i =0; $i < $Connections; $i++) {
+ $successCount += MakeLondConnection();
+ }
+ if($successCount == 0) { # All connections failed:
+ Debug(5,"Work in queue failed to make any connectiouns\n");
+ EmptyQueue(); # Fail pending transactions with con_lost.
+ }
+ } else {
+ ShowStatus(GetServerHost()." >>> DEAD!!! <<<");
+ Debug(5,"Work in queue, but gave up on connections..flushing\n");
+ EmptyQueue(); # Connections can't be established.
}
}
@@ -251,7 +354,7 @@ Trigger disconnections of idle sockets.
sub SetupTimer {
Debug(6, "SetupTimer");
- Event->timer(interval => 1, debug => 1, cb => \&Tick );
+ Event->timer(interval => 1, cb => \&Tick );
}
=pod
@@ -273,19 +376,19 @@ sub ServerToIdle {
my $Socket = shift; # Get the socket.
delete($ActiveTransactions{$Socket}); # Server has no transaction
- &Debug(6, "Server to idle");
+ &Debug(5, "Server to idle");
# If there's work to do, start the transaction:
- $reqdata = $WorkQueue->dequeue(); # This is a LondTransaction
- unless($reqdata eq undef) {
- Debug(9, "Queue gave request data: ".$reqdata->getRequest());
+ my $reqdata = $WorkQueue->dequeue(); # This is a LondTransaction
+ if ($reqdata ne undef) {
+ Debug(5, "Queue gave request data: ".$reqdata->getRequest());
&StartRequest($Socket, $reqdata);
} else {
# There's no work waiting, so push the server to idle list.
- &Debug(8, "No new work requests, server connection going idle");
+ &Debug(5, "No new work requests, server connection going idle");
$IdleConnections->push($Socket);
}
}
@@ -331,7 +434,7 @@ sub ClientWritable {
# request.
&Debug(9,"Send result is ".$result." Defined: ".defined($result));
- if(defined($result)) {
+ if($result ne undef) {
&Debug(9, "send result was defined");
if($result == length($Data)) { # Entire string sent.
&Debug(9, "ClientWritable data all written");
@@ -349,6 +452,12 @@ sub ClientWritable {
} else { # Partial string sent.
$Watcher->data(substr($Data, $result));
+ if($result == 0) { # client hung up on us!!
+ Log("INFO", "lonc pipe client hung up on us!");
+ $Watcher->cancel;
+ $Socket->shutdown(2);
+ $Socket->close();
+ }
}
} else { # Error of some sort...
@@ -396,7 +505,7 @@ The transaction that is being completed.
=cut
sub CompleteTransaction {
- &Debug(6,"Complete transaction");
+ &Debug(5,"Complete transaction");
my $Socket = shift;
my $Transaction = shift;
@@ -404,9 +513,8 @@ sub CompleteTransaction {
my $data = $Socket->GetReply(); # Data to send.
StartClientReply($Transaction, $data);
} else { # Delete deferred transaction file.
- &Debug(4, "Deferred transaction complete: ".$Transaction->getFile().
- " request: ".$Transaction->getRequest().
- " answer: ".$Socket->GetReply());
+ Log("SUCCESS", "A delayed transaction was completed");
+ LogPerm("S:$Transaction->getClient() :".$Transaction->getRequest());
unlink $Transaction->getFile();
}
}
@@ -430,12 +538,12 @@ sub StartClientReply {
my $Transaction = shift;
my $data = shift;
+
my $Client = $Transaction->getClient();
&Debug(8," Reply was: ".$data);
my $Serial = $ActiveClients{$Client};
my $desc = sprintf("Connection to lonc client %d",
-
$Serial);
Event->io(fd => $Client,
poll => "w",
@@ -466,13 +574,16 @@ Parameters:
sub FailTransaction {
my $transaction = shift;
- my $Lond = $transaction->getServer();
- if (!$client->isDeferred()) { # If the transaction is deferred we'll get to it.
- my $client = $transcation->getClient();
- StartClientReply($client, "con_lost");
+ Log("WARNING", "Failing transaction ".$transaction->getRequest());
+ Debug(1, "Failing transaction: ".$transaction->getRequest());
+ if (!$transaction->isDeferred()) { # If the transaction is deferred we'll get to it.
+ my $client = $transaction->getClient();
+ Debug(1," Replying con_lost to ".$transaction->getRequest());
+ StartClientReply($transaction, "con_lost\n");
+ }
+ if($ConnectionRetriesLeft <= 0) {
+ Log("CRITICAL", "Host marked dead: ".GetServerHost());
}
-# not needed, done elsewhere if active.
-# delete $ActiveTransactions{$Lond};
}
@@ -484,14 +595,29 @@ sub FailTransaction {
=cut
sub EmptyQueue {
+ $ConnectionRetriesLeft--; # Counts as connection failure too.
while($WorkQueue->Count()) {
- my $request = $Workqueue->dequeue(); # This is a transaction
+ my $request = $WorkQueue->dequeue(); # This is a transaction
FailTransaction($request);
}
}
=pod
+=head2 CloseAllLondConnections
+
+Close all connections open on lond prior to exit e.g.
+
+=cut
+sub CloseAllLondConnections {
+ foreach my $Socket (keys %ActiveConnections) {
+ KillSocket($Socket);
+ }
+}
+=cut
+
+=pod
+
=head2 KillSocket
Destroys a socket. This function can be called either when a socket
@@ -515,6 +641,9 @@ nonzero if we are allowed to create a ne
sub KillSocket {
my $Socket = shift;
+ Log("WARNING", "Shutting down a socket");
+ $Socket->Shutdown();
+
# If the socket came from the active connection set,
# delete its transaction... note that FailTransaction should
# already have been called!!!
@@ -528,12 +657,12 @@ sub KillSocket {
delete($ActiveConnections{$Socket});
}
$ConnectionCount--;
-
+ if ($ConnectionCount < 0) { $ConnectionCount = 0; }
# If the connection count has gone to zero and there is work in the
# work queue, the work all gets failed with con_lost.
#
if($ConnectionCount == 0) {
- EmptyQueue;
+ EmptyQueue();
}
}
@@ -602,23 +731,28 @@ sub LondReadable {
my $Socket = $Watcher->data;
my $client = undef;
- &Debug(6,"LondReadable called state = ".$State);
+ &Debug(6,"LondReadable called state = ".$Socket->GetState());
my $State = $Socket->GetState(); # All action depends on the state.
SocketDump(6, $Socket);
+ my $status = $Socket->Readable();
+
+ &Debug(2, "Socket->Readable returned: $status");
- if($Socket->Readable() != 0) {
+ if($status != 0) {
# bad return from socket read. Currently this means that
# The socket has become disconnected. We fail the transaction.
+ Log("WARNING",
+ "Lond connection lost.");
if(exists($ActiveTransactions{$Socket})) {
- Debug(3,"Lond connection lost failing transaction");
FailTransaction($ActiveTransactions{$Socket});
}
$Watcher->cancel();
KillSocket($Socket);
+ $ConnectionRetriesLeft--; # Counts as connection failure
return;
}
SocketDump(6,$Socket);
@@ -652,11 +786,18 @@ sub LondReadable {
} elsif ($State eq "Idle") {
# If necessary, complete a transaction and then go into the
# idle queue.
+ # Note that a trasition to idle indicates a live lond
+ # on the other end so reset the connection retries.
+ #
+ $ConnectionRetriesLeft = $ConnectionRetries; # success resets the count
$Watcher->cancel();
if(exists($ActiveTransactions{$Socket})) {
- Debug(8,"Completing transaction!!");
+ Debug(5,"Completing transaction!!");
CompleteTransaction($Socket,
$ActiveTransactions{$Socket});
+ } else {
+ Log("SUCCESS", "Connection ".$ConnectionCount." to "
+ .$RemoteHost." now ready for action");
}
ServerToIdle($Socket); # Next work unit or idle.
@@ -759,7 +900,9 @@ sub LondWritable {
if ($Socket->Writable() != 0) {
# The write resulted in an error.
# We'll treat this as if the socket got disconnected:
-
+ Log("WARNING", "Connection to ".$RemoteHost.
+ " has been disconnected");
+ FailTransaction($ActiveTransactions{$Socket});
$Watcher->cancel();
KillSocket($Socket);
return;
@@ -859,8 +1002,7 @@ sub QueueDelayed {
Debug(4, "Delayed path: ".$path);
opendir(DIRHANDLE, $path);
- @alldelayed = grep /\.$RemoteHost$/, readdir DIRHANDLE;
- Debug(4, "Got ".$alldelayed." delayed files");
+ my @alldelayed = grep /\.$RemoteHost$/, readdir DIRHANDLE;
closedir(DIRHANDLE);
my $dfname;
my $reqfile;
@@ -870,7 +1012,7 @@ sub QueueDelayed {
my $Handle = IO::File->new($reqfile);
my $cmd = <$Handle>;
chomp $cmd; # There may or may not be a newline...
- $cmd = $cmd."\ny"; # now for sure there's exactly one newline.
+ $cmd = $cmd."\n"; # now for sure there's exactly one newline.
my $Transaction = LondTransaction->new($cmd);
$Transaction->SetDeferred($reqfile);
QueueTransaction($Transaction);
@@ -897,23 +1039,27 @@ sub MakeLondConnection {
my $Connection = LondConnection->new(&GetServerHost(),
&GetServerPort());
- if($Connection == undef) { # Needs to be more robust later.
- Debug(0,"Failed to make a connection with lond.");
+ if($Connection eq undef) { # Needs to be more robust later.
+ Log("CRITICAL","Failed to make a connection with lond.");
+ $ConnectionRetriesLeft--;
+ return 0; # Failure.
} else {
+
# The connection needs to have writability
# monitored in order to send the init sequence
# that starts the whole authentication/key
# exchange underway.
#
my $Socket = $Connection->GetSocket();
- if($Socket == undef) {
+ if($Socket eq undef) {
die "did not get a socket from the connection";
} else {
&Debug(9,"MakeLondConnection got socket: ".$Socket);
}
-
- $event = Event->io(fd => $Socket,
+ $Connection->SetTimeoutCallback(\&SocketTimeout);
+
+ my $event = Event->io(fd => $Socket,
poll => 'w',
cb => \&LondWritable,
data => $Connection,
@@ -925,6 +1071,9 @@ sub MakeLondConnection {
if($ConnectionCount == 1) { # First Connection:
QueueDelayed;
}
+ Log("SUCESS", "Created connection ".$ConnectionCount
+ ." to host ".GetServerHost());
+ return 1; # Return success.
}
}
@@ -966,7 +1115,7 @@ sub StartRequest {
$ActiveTransactions{$Lond} = $Request;
$Lond->InitiateTransaction($Request->getRequest());
- $event = Event->io(fd => $Socket,
+ my $event = Event->io(fd => $Socket,
poll => "w",
cb => \&LondWritable,
data => $Lond,
@@ -1005,11 +1154,18 @@ sub QueueTransaction {
my $LondSocket = $IdleConnections->pop();
if(!defined $LondSocket) { # Need to queue request.
- Debug(8,"Must queue...");
+ Debug(5,"Must queue...");
$WorkQueue->enqueue($requestData);
if($ConnectionCount < $MaxConnectionCount) {
- Debug(4,"Starting additional lond connection");
- MakeLondConnection();
+ if($ConnectionRetriesLeft > 0) {
+ Debug(5,"Starting additional lond connection");
+ if(MakeLondConnection() == 0) {
+ EmptyQueue(); # Fail transactions, can't make connection.
+ }
+ } else {
+ ShowStatus(GetServerHost()." >>> DEAD !!!! <<<");
+ EmptyQueue(); # It's worse than that ... he's dead Jim.
+ }
}
} else { # Can start the request:
Debug(8,"Can start...");
@@ -1022,7 +1178,6 @@ sub QueueTransaction {
=pod
=head2 ClientRequest
-
Callback that is called when data can be read from the UNIX domain
socket connecting us with an apache server process.
@@ -1041,17 +1196,24 @@ sub ClientRequest {
my $rv = $socket->recv($thisread, POSIX::BUFSIZ, 0);
Debug(8, "rcv: data length = ".length($thisread)
." read =".$thisread);
- unless (defined $rv && length($thisread)) {
+ unless (defined $rv && length($thisread)) {
# Likely eof on socket.
Debug(5,"Client Socket closed on lonc for ".$RemoteHost);
close($socket);
$watcher->cancel();
delete($ActiveClients{$socket});
+ return;
}
Debug(8,"Data: ".$data." this read: ".$thisread);
$data = $data.$thisread; # Append new data.
$watcher->data($data);
if($data =~ /(.*\n)/) { # Request entirely read.
+ if($data eq "close_connection_exit\n") {
+ Log("CRITICAL",
+ "Request Close Connection ... exiting");
+ CloseAllLondConnections();
+ exit;
+ }
Debug(8, "Complete transaction received: ".$data);
my $Transaction = LondTransaction->new($data);
$Transaction->SetClient($socket);
@@ -1161,8 +1323,67 @@ sub SetupLoncListener {
fd => $socket);
}
+=pod
+
+=head2 ChildStatus
+
+Child USR1 signal handler to report the most recent status
+into the status file.
+
+We also use this to reset the retries count in order to allow the
+client to retry connections with a previously dead server.
+=cut
+sub ChildStatus {
+ my $event = shift;
+ my $watcher = $event->w;
+
+ Debug(2, "Reporting child status because : ".$watcher->data);
+ my $docdir = $perlvar{'lonDocRoot'};
+ my $fh = IO::File->new(">>$docdir/lon-status/loncstatus.txt");
+ print $fh $$."\t".$RemoteHost."\t".$Status."\t".
+ $RecentLogEntry."\n";
+ $ConnectionRetriesLeft = $ConnectionRetries;
+}
+
=pod
+=head2 SignalledToDeath
+
+Called in response to a signal that causes a chid process to die.
+
+=cut
+
+
+sub SignalledToDeath {
+ my $event = shift;
+ my $watcher= $event->w;
+
+ Debug(2,"Signalled to death! via ".$watcher->data);
+ my ($signal) = $watcher->data;
+ chomp($signal);
+ Log("CRITICAL", "Abnormal exit. Child $$ for $RemoteHost "
+ ."died through "."\"$signal\"");
+ LogPerm("F:lonc: $$ on $RemoteHost signalled to death: "
+ ."\"$signal\"");
+ exit 0;
+
+}
+
+=head2 ToggleDebug
+
+This sub toggles trace debugging on and off.
+
+=cut
+
+sub ToggleDebug {
+ my $Current = $DebugLevel;
+ $DebugLevel = $NextDebugLevel;
+ $NextDebugLevel = $Current;
+
+ Log("SUCCESS", "New debugging level for $RemoteHost now $DebugLevel");
+
+}
+
=head2 ChildProcess
This sub implements a child process for a single lonc daemon.
@@ -1171,16 +1392,23 @@ This sub implements a child process for
sub ChildProcess {
- print "Loncnew\n";
- # For now turn off signals.
-
- $SIG{QUIT} = IGNORE;
- $SIG{HUP} = IGNORE;
- $SIG{USR1} = IGNORE;
- $SIG{INT} = IGNORE;
- $SIG{CHLD} = IGNORE;
- $SIG{__DIE__} = IGNORE;
+ #
+ # Signals must be handled by the Event framework...
+#
+
+ Event->signal(signal => "QUIT",
+ cb => \&SignalledToDeath,
+ data => "QUIT");
+ Event->signal(signal => "HUP",
+ cb => \&ChildStatus,
+ data => "HUP");
+ Event->signal(signal => "USR1",
+ cb => \&ChildStatus,
+ data => "USR1");
+ Event->signal(signal => "INT",
+ cb => \&ToggleDebug,
+ data => "INT");
SetupTimer();
@@ -1192,12 +1420,9 @@ sub ChildProcess {
# Setup the initial server connection:
- &MakeLondConnection();
+ # &MakeLondConnection(); // let first work requirest do it.
+
- if($ConnectionCount == 0) {
- Debug(1,"Could not make initial connection..\n");
- Debug(1,"Will retry when there's work to do\n");
- }
Debug(9,"Entering event loop");
my $ret = Event::loop(); # Start the main event loop.
@@ -1208,16 +1433,23 @@ sub ChildProcess {
# Create a new child for host passed in:
sub CreateChild {
+ my $sigset = POSIX::SigSet->new(SIGINT);
+ sigprocmask(SIG_BLOCK, $sigset);
my $host = shift;
$RemoteHost = $host;
- Debug(3, "Forking off child for ".$RemoteHost);
- sleep(5);
- $pid = fork;
+ Log("CRITICAL", "Forking server for ".$host);
+ my $pid = fork;
if($pid) { # Parent
- $ChildHash{$pid} = $RemoteHost;
+ $RemoteHost = "Parent";
+ $ChildHash{$pid} = $host;
+ $HostToPid{$host}= $pid;
+ sigprocmask(SIG_UNBLOCK, $sigset);
+
} else { # child.
ShowStatus("Connected to ".$RemoteHost);
- ChildProcess;
+ $SIG{INT} = 'DEFAULT';
+ sigprocmask(SIG_UNBLOCK, $sigset);
+ ChildProcess; # Does not return.
}
}
@@ -1252,11 +1484,13 @@ if ($childpid != 0) {
#
ShowStatus("Parent writing pid file:");
-$execdir = $perlvar{'lonDaemons'};
+my $execdir = $perlvar{'lonDaemons'};
open (PIDSAVE, ">$execdir/logs/lonc.pid");
print PIDSAVE "$$\n";
close(PIDSAVE);
+
+
if (POSIX::setsid() < 0) {
print "Could not create new session\n";
exit -1;
@@ -1264,29 +1498,241 @@ if (POSIX::setsid() < 0) {
ShowStatus("Forking node servers");
+Log("CRITICAL", "--------------- Starting children ---------------");
+
+LondConnection::ReadConfig; # Read standard config files.
my $HostIterator = LondConnection::GetHostIterator;
while (! $HostIterator->end()) {
- $hostentryref = $HostIterator->get();
+ my $hostentryref = $HostIterator->get();
CreateChild($hostentryref->[0]);
+ $HostHash{$hostentryref->[0]} = $hostentryref->[4];
$HostIterator->next();
}
+$RemoteHost = "Parent Server";
# Maintain the population:
ShowStatus("Parent keeping the flock");
+#
+# Set up parent signals:
+#
+
+$SIG{INT} = \&Terminate;
+$SIG{TERM} = \&Terminate;
+$SIG{HUP} = \&Restart;
+$SIG{USR1} = \&CheckKids;
+$SIG{USR2} = \&UpdateKids; # LonManage update request.
+
while(1) {
- $deadchild = wait();
+ my $deadchild = wait();
if(exists $ChildHash{$deadchild}) { # need to restart.
- $deadhost = $ChildHash{$deadchild};
+ my $deadhost = $ChildHash{$deadchild};
+ delete($HostToPid{$deadhost});
delete($ChildHash{$deadchild});
- Debug(4,"Lost child pid= ".$deadchild.
+ Log("WARNING","Lost child pid= ".$deadchild.
"Connected to host ".$deadhost);
+ Log("INFO", "Restarting child procesing ".$deadhost);
CreateChild($deadhost);
}
}
+
+
+=pod
+
+=head1 CheckKids
+
+ Since kids do not die as easily in this implementation
+as the previous one, there is no need to restart the
+dead ones (all dead kids get restarted when they die!!)
+The only thing this function does is to pass USR1 to the
+kids so that they report their status.
+
+=cut
+
+sub CheckKids {
+ Debug(2, "Checking status of children");
+ my $docdir = $perlvar{'lonDocRoot'};
+ my $fh = IO::File->new(">$docdir/lon-status/loncstatus.txt");
+ my $now=time;
+ my $local=localtime($now);
+ print $fh "LONC status $local - parent $$ \n\n";
+ foreach my $pid (keys %ChildHash) {
+ Debug(2, "Sending USR1 -> $pid");
+ kill 'USR1' => $pid; # Tell Child to report status.
+ sleep 1; # Wait so file doesn't intermix.
+ }
+}
+
+=pod
+
+=head1 UpdateKids
+
+parent's SIGUSR2 handler. This handler:
+
+=item
+
+Rereads the hosts file.
+
+=item
+
+Kills off (via sigint) children for hosts that have disappeared.
+
+=item
+
+QUITs children for hosts that already exist (this just forces a status display
+and resets the connection retry count for that host.
+
+=item
+
+Starts new children for hosts that have been added to the hosts.tab file since
+the start of the master program and maintains them.
+
+=cut
+
+sub UpdateKids {
+
+ Log("INFO", "Updating connections via SIGUSR2");
+
+ # Just in case we need to kill our own lonc, we wait a few seconds to
+ # give it a chance to receive and relay lond's response to the
+ # re-init command.
+ #
+
+ sleep(2); # Wait a couple of seconds.
+
+ my %hosts; # Indexed by loncapa hostname, value=ip.
+
+ # Need to re-read the host table:
+
+
+ LondConnection::ReadConfig();
+ my $I = LondConnection::GetHostIterator;
+ while (! $I->end()) {
+ my $item = $I->get();
+ $hosts{$item->[0]} = $item->[4];
+ $I->next();
+ }
+
+ # The logic below is written for clarity not for efficiency.
+ # Since I anticipate that this function is only rarely called, that's
+ # appropriate. There are certainly ways to combine the loops below,
+ # and anyone wishing to obscure the logic is welcome to go for it.
+ # Note that we don't re-direct sigchild. Instead we do what's needed
+ # to the data structures that keep track of children to ensure that
+ # when sigchild is honored, no new child is born.
+ #
+
+ # For each existing child; if it's host doesn't exist, kill the child.
+
+ foreach my $child (keys %ChildHash) {
+ my $oldhost = $ChildHash{$child};
+ if (!(exists $hosts{$oldhost})) {
+ Log("CRITICAL", "Killing child for $oldhost host no longer exists");
+ delete $ChildHash{$child};
+ delete $HostToPid{$oldhost};
+ kill 'QUIT' => $child;
+ }
+ }
+ # For each remaining existing child; if it's host's ip has changed,
+ # Restart the child on the new IP.
+
+ foreach my $child (keys %ChildHash) {
+ my $oldhost = $ChildHash{$child};
+ my $oldip = $HostHash{$oldhost};
+ if ($hosts{$oldhost} ne $oldip) {
+
+ # kill the old child.
+
+ Log("CRITICAL", "Killing child for $oldhost host ip has changed...");
+ delete $ChildHash{$child};
+ delete $HostToPid{$oldhost};
+ kill 'QUIT' => $child;
+
+ # Do the book-keeping needed to start a new child on the
+ # new ip.
+
+ $HostHash{$oldhost} = $hosts{$oldhost};
+ CreateChild($oldhost);
+ }
+ }
+ # Finally, for each new host, not in the host hash, create a
+ # enter the host and create a new child.
+ # Force a status display of any existing process.
+
+ foreach my $host (keys %hosts) {
+ if(!(exists $HostHash{$host})) {
+ Log("INFO", "New host $host discovered in hosts.tab...");
+ $HostHash{$host} = $hosts{$host};
+ CreateChild($host);
+ } else {
+ kill 'HUP' => $HostToPid{$host}; # status display.
+ }
+ }
+}
+
+
+=pod
+
+=head1 Restart
+
+Signal handler for HUP... all children are killed and
+we self restart. This is an el-cheapo way to re read
+the config file.
+
+=cut
+
+sub Restart {
+ &KillThemAll; # First kill all the children.
+ Log("CRITICAL", "Restarting");
+ my $execdir = $perlvar{'lonDaemons'};
+ unlink("$execdir/logs/lonc.pid");
+ exec("$execdir/loncnew");
+}
+
+=pod
+
+=head1 KillThemAll
+
+Signal handler that kills all children by sending them a
+SIGHUP. Responds to sigint and sigterm.
+
+=cut
+
+sub KillThemAll {
+ Debug(2, "Kill them all!!");
+ local($SIG{CHLD}) = 'IGNORE'; # Our children >will< die.
+ foreach my $pid (keys %ChildHash) {
+ my $serving = $ChildHash{$pid};
+ Debug(2, "Killing lonc for $serving pid = $pid");
+ ShowStatus("Killing lonc for $serving pid = $pid");
+ Log("CRITICAL", "Killing lonc for $serving pid = $pid");
+ kill 'QUIT' => $pid;
+ delete($ChildHash{$pid});
+ }
+ my $execdir = $perlvar{'lonDaemons'};
+ unlink("$execdir/logs/lonc.pid");
+
+}
+
+=pod
+
+=head1 Terminate
+
+Terminate the system.
+
+=cut
+
+sub Terminate {
+ KillThemAll;
+ Log("CRITICAL","Master process exiting");
+ exit 0;
+
+}
+=pod
+
=head1 Theory
The event class is used to build this as a single process with an