--- loncom/lond 2007/11/12 22:54:42 1.390
+++ loncom/lond 2022/02/07 12:12:07 1.489.2.43.2.2
@@ -2,7 +2,7 @@
# The LearningOnline Network
# lond "LON Daemon" Server (port "LOND" 5663)
#
-# $Id: lond,v 1.390 2007/11/12 22:54:42 raeburn Exp $
+# $Id: lond,v 1.489.2.43.2.2 2022/02/07 12:12:07 raeburn Exp $
#
# Copyright Michigan State University Board of Trustees
#
@@ -33,6 +33,7 @@ use strict;
use lib '/home/httpd/lib/perl/';
use LONCAPA;
use LONCAPA::Configuration;
+use LONCAPA::Lond;
use IO::Socket;
use IO::File;
@@ -42,7 +43,6 @@ use Crypt::IDEA;
use LWP::UserAgent();
use Digest::MD5 qw(md5_hex);
use GDBM_File;
-use Authen::Krb4;
use Authen::Krb5;
use localauth;
use localenroll;
@@ -53,13 +53,17 @@ use LONCAPA::lonlocal;
use LONCAPA::lonssl;
use Fcntl qw(:flock);
use Apache::lonnet;
+use Mail::Send;
+use Crypt::Eksblowfish::Bcrypt;
+use Digest::SHA;
+use Encode;
my $DEBUG = 0; # Non zero to enable debug log entries.
my $status='';
my $lastlog='';
-my $VERSION='$Revision: 1.390 $'; #' stupid emacs
+my $VERSION='$Revision: 1.489.2.43.2.2 $'; #' stupid emacs
my $remoteVERSION;
my $currenthostid="default";
my $currentdomainid;
@@ -67,6 +71,9 @@ my $currentdomainid;
my $client;
my $clientip; # IP address of client.
my $clientname; # LonCAPA name of client.
+my $clientversion; # LonCAPA version running on client.
+my $clienthomedom; # LonCAPA domain of homeID for client.
+ # primary library server.
my $server;
@@ -88,6 +95,8 @@ my %managers; # Ip -> manager names
my %perlvar; # Will have the apache conf defined perl vars.
+my $dist;
+
#
# The hash below is used for command dispatching, and is therefore keyed on the request keyword.
# Each element of the hash contains a reference to an array that contains:
@@ -123,25 +132,16 @@ my @passwderrors = ("ok",
"pwchange_failure - lcpasswd Error filename is invalid");
-# The array below are lcuseradd error strings.:
-
-my $lastadderror = 13;
-my @adderrors = ("ok",
- "User ID mismatch, lcuseradd must run as user www",
- "lcuseradd Incorrect number of command line parameters must be 3",
- "lcuseradd Incorrect number of stdinput lines, must be 3",
- "lcuseradd Too many other simultaneous pwd changes in progress",
- "lcuseradd User does not exist",
- "lcuseradd Unable to make www member of users's group",
- "lcuseradd Unable to su to root",
- "lcuseradd Unable to set password",
- "lcuseradd Username has invalid characters",
- "lcuseradd Password has an invalid character",
- "lcuseradd User already exists",
- "lcuseradd Could not add user.",
- "lcuseradd Password mismatch");
-
+# This array are the errors from lcinstallfile:
+my @installerrors = ("ok",
+ "Initial user id of client not that of www",
+ "Usage error, not enough command line arguments",
+ "Source filename does not exist",
+ "Destination filename does not exist",
+ "Some file operation failed",
+ "Invalid table filename."
+ );
#
# Statistics that are maintained and dislayed in the status line.
@@ -398,6 +398,7 @@ sub isClient {
#
sub ReadManagerTable {
+ &Debug("Reading manager table");
# Clean out the old table first..
foreach my $key (keys %managers) {
@@ -406,8 +407,11 @@ sub ReadManagerTable {
my $tablename = $perlvar{'lonTabDir'}."/managers.tab";
if (!open (MANAGERS, $tablename)) {
- logthis('No manager table. Nobody can manage!!');
- return;
+ my $hostname = &Apache::lonnet::hostname($perlvar{'lonHostID'});
+ if (&Apache::lonnet::is_LC_dns($hostname)) {
+ &logthis('No manager table. Nobody can manage!!');
+ }
+ return;
}
while(my $host = ) {
chomp($host);
@@ -432,7 +436,7 @@ sub ReadManagerTable {
}
} else {
logthis(' existing host'." $host\n");
- $managers{&Apache::lonnet::get_host_ip($host)} = $host; # Use info from cluster tab if clumemeber
+ $managers{&Apache::lonnet::get_host_ip($host)} = $host; # Use info from cluster tab if cluster memeber
}
}
}
@@ -494,7 +498,8 @@ sub AdjustHostContents {
my $me = $perlvar{'lonHostID'};
foreach my $line (split(/\n/,$contents)) {
- if(!(($line eq "") || ($line =~ /^ *\#/) || ($line =~ /^ *$/))) {
+ if(!(($line eq "") || ($line =~ /^ *\#/) || ($line =~ /^ *$/) ||
+ ($line =~ /^\s*\^/))) {
chomp($line);
my ($id,$domain,$role,$name,$ip,$maxcon,$idleto,$mincon)=split(/:/,$line);
if ($id eq $me) {
@@ -520,11 +525,9 @@ sub AdjustHostContents {
}
#
# InstallFile: Called to install an administrative file:
-# - The file is created with .tmp
-# - The .tmp file is then mv'd to
-# This lugubrious procedure is done to ensure that we are never without
-# a valid, even if dated, version of the file regardless of who crashes
-# and when the crash occurs.
+# - The file is created int a temp directory called .tmp
+# - lcinstall file is called to install the file.
+# since the web app has no direct write access to the table directory
#
# Parameters:
# Name of the file
@@ -532,11 +535,16 @@ sub AdjustHostContents {
# Return:
# nonzero - success.
# 0 - failure and $! has an errno.
+# Assumptions:
+# File installtion is a relatively infrequent
#
sub InstallFile {
my ($Filename, $Contents) = @_;
- my $TempFile = $Filename.".tmp";
+# my $TempFile = $Filename.".tmp";
+ my $exedir = $perlvar{'lonDaemons'};
+ my $tmpdir = $exedir.'/tmp/';
+ my $TempFile = $tmpdir."TempTableFile.tmp";
# Open the file for write:
@@ -550,11 +558,27 @@ sub InstallFile {
print $fh ($Contents);
$fh->close; # In case we ever have a filesystem w. locking
- chmod(0660, $TempFile);
+ chmod(0664, $TempFile); # Everyone can write it.
- # Now we can move install the file in position.
-
- move($TempFile, $Filename);
+ # Use lcinstall file to put the file in the table directory...
+
+ &Debug("Opening pipe to $exedir/lcinstallfile $TempFile $Filename");
+ my $pf = IO::File->new("| $exedir/lcinstallfile $TempFile $Filename > $exedir/logs/lcinstallfile.log");
+ close $pf;
+ my $err = $?;
+ &Debug("Status is $err");
+ if ($err != 0) {
+ my $msg = $err;
+ if ($err < @installerrors) {
+ $msg = $installerrors[$err];
+ }
+ &logthis("Install failed for table file $Filename : $msg");
+ return 0;
+ }
+
+ # Remove the temp file:
+
+ unlink($TempFile);
return 1;
}
@@ -562,8 +586,10 @@ sub InstallFile {
#
# ConfigFileFromSelector: converts a configuration file selector
-# (one of host or domain at this point) into a
-# configuration file pathname.
+# into a configuration file pathname.
+# Supports the following file selectors:
+# hosts, domain, dns_hosts, dns_domain
+#
#
# Parameters:
# selector - Configuration file selector.
@@ -575,15 +601,11 @@ sub ConfigFileFromSelector {
my $tablefile;
my $tabledir = $perlvar{'lonTabDir'}.'/';
- if ($selector eq "hosts") {
- $tablefile = $tabledir."hosts.tab";
- } elsif ($selector eq "domain") {
- $tablefile = $tabledir."domain.tab";
- } else {
- return undef;
+ if (($selector eq "hosts") || ($selector eq "domain") ||
+ ($selector eq "dns_hosts") || ($selector eq "dns_domain")) {
+ $tablefile = $tabledir.$selector.'.tab';
}
return $tablefile;
-
}
#
# PushFile: Called to do an administrative push of a file.
@@ -601,13 +623,16 @@ sub ConfigFileFromSelector {
# String to send to client ("ok" or "refused" if bad file).
#
sub PushFile {
- my $request = shift;
+ my $request = shift;
my ($command, $filename, $contents) = split(":", $request, 3);
+ &Debug("PushFile");
# At this point in time, pushes for only the following tables are
# supported:
# hosts.tab ($filename eq host).
# domain.tab ($filename eq domain).
+ # dns_hosts.tab ($filename eq dns_host).
+ # dns_domain.tab ($filename eq dns_domain).
# Construct the destination filename or reject the request.
#
# lonManage is supposed to ensure this, however this session could be
@@ -619,20 +644,7 @@ sub PushFile {
if(! (defined $tablefile)) {
return "refused";
}
- #
- # >copy< the old table to the backup table
- # don't rename in case system crashes/reboots etc. in the time
- # window between a rename and write.
- #
- my $backupfile = $tablefile;
- $backupfile =~ s/\.tab$/.old/;
- if(!CopyFile($tablefile, $backupfile)) {
- &logthis(' CopyFile from '.$tablefile." to ".$backupfile." failed ");
- return "error:$!";
- }
- &logthis(' Pushfile: backed up '
- .$tablefile." to $backupfile");
-
+
# If the file being pushed is the host file, we adjust the entry for ourself so that the
# IP will be our current IP as looked up in dns. Note this is only 99% good as it's possible
# to conceive of conditions where we don't have a DNS entry locally. This is possible in a
@@ -641,21 +653,80 @@ sub PushFile {
if($filename eq "host") {
$contents = AdjustHostContents($contents);
+ } elsif ($filename eq 'dns_host' || $filename eq 'dns_domain') {
+ if ($contents eq '') {
+ &logthis(' Pushfile: unable to install '
+ .$tablefile." - no data received from push. ");
+ return 'error: push had no data';
+ }
+ if (&Apache::lonnet::get_host_ip($clientname)) {
+ my $clienthost = &Apache::lonnet::hostname($clientname);
+ if ($managers{$clientip} eq $clientname) {
+ my $clientprotocol = $Apache::lonnet::protocol{$clientname};
+ $clientprotocol = 'http' if ($clientprotocol ne 'https');
+ my $url = '/adm/'.$filename;
+ $url =~ s{_}{/};
+ my $ua=new LWP::UserAgent;
+ $ua->timeout(60);
+ my $request=new HTTP::Request('GET',"$clientprotocol://$clienthost$url");
+ my $response=$ua->request($request);
+ if ($response->is_error()) {
+ &logthis(' Pushfile: unable to install '
+ .$tablefile." - error attempting to pull data. ");
+ return 'error: pull failed';
+ } else {
+ my $result = $response->content;
+ chomp($result);
+ unless ($result eq $contents) {
+ &logthis(' Pushfile: unable to install '
+ .$tablefile." - pushed data and pulled data differ. ");
+ my $pushleng = length($contents);
+ my $pullleng = length($result);
+ if ($pushleng != $pullleng) {
+ return "error: $pushleng vs $pullleng bytes";
+ } else {
+ return "error: mismatch push and pull";
+ }
+ }
+ }
+ }
+ }
}
# Install the new file:
+ &logthis("Installing new $tablefile contents:\n$contents");
if(!InstallFile($tablefile, $contents)) {
&logthis(' Pushfile: unable to install '
.$tablefile." $! ");
return "error:$!";
} else {
&logthis(' Installed new '.$tablefile
- ."");
-
+ ." - transaction by: $clientname ($clientip)");
+ my $adminmail = $perlvar{'lonAdmEMail'};
+ my $admindom = &Apache::lonnet::host_domain($perlvar{'lonHostID'});
+ if ($admindom ne '') {
+ my %domconfig =
+ &Apache::lonnet::get_dom('configuration',['contacts'],$admindom);
+ if (ref($domconfig{'contacts'}) eq 'HASH') {
+ if ($domconfig{'contacts'}{'adminemail'} ne '') {
+ $adminmail = $domconfig{'contacts'}{'adminemail'};
+ }
+ }
+ }
+ if ($adminmail =~ /^[^\@]+\@[^\@]+$/) {
+ my $msg = new Mail::Send;
+ $msg->to($adminmail);
+ $msg->subject('LON-CAPA DNS update on '.$perlvar{'lonHostID'});
+ $msg->add('Content-type','text/plain; charset=UTF-8');
+ if (my $fh = $msg->open()) {
+ print $fh 'Update to '.$tablefile.' from Cluster Manager '.
+ "$clientname ($clientip)\n";
+ $fh->close;
+ }
+ }
}
-
# Indicate success:
return "ok";
@@ -951,6 +1022,9 @@ sub read_profile {
&GDBM_READER());
if ($hashref) {
my @queries=split(/\&/,$what);
+ if ($namespace eq 'roles') {
+ @queries = map { &unescape($_); } @queries;
+ }
my $qresult='';
for (my $i=0;$i<=$#queries;$i++) {
@@ -1044,7 +1118,7 @@ sub pong_handler {
# Implicit Inputs:
# $currenthostid - Global variable that carries the name of the host
# known as.
-# $clientname - Global variable that carries the name of the hsot we're connected to.
+# $clientname - Global variable that carries the name of the host we're connected to.
# Returns:
# 1 - Ok to continue processing.
# 0 - Program should exit.
@@ -1083,7 +1157,7 @@ sub establish_key_handler {
# Implicit Inputs:
# $currenthostid - Global variable that carries the name of the host
# known as.
-# $clientname - Global variable that carries the name of the hsot we're connected to.
+# $clientname - Global variable that carries the name of the host we're connected to.
# Returns:
# 1 - Ok to continue processing.
# 0 - Program should exit.
@@ -1092,6 +1166,8 @@ sub establish_key_handler {
sub load_handler {
my ($cmd, $tail, $replyfd) = @_;
+
+
# Get the load average from /proc/loadavg and calculate it as a percentage of
# the allowed load limit as set by the perl global variable lonLoadLim
@@ -1120,7 +1196,7 @@ sub load_handler {
# Implicit Inputs:
# $currenthostid - Global variable that carries the name of the host
# known as.
-# $clientname - Global variable that carries the name of the hsot we're connected to.
+# $clientname - Global variable that carries the name of the host we're connected to.
# Returns:
# 1 - Ok to continue processing.
# 0 - Program should exit
@@ -1198,7 +1274,7 @@ sub user_authorization_type {
# a reply is written to the client.
sub push_file_handler {
my ($cmd, $tail, $client) = @_;
-
+ &Debug("In push file handler");
my $userinput = "$cmd:$tail";
# At this time we only know that the IP of our partner is a valid manager
@@ -1206,7 +1282,8 @@ sub push_file_handler {
# spoofing).
my $cert = &GetCertificate($userinput);
- if(&ValidManager($cert)) {
+ if(&ValidManager($cert)) {
+ &Debug("Valid manager: $client");
# Now presumably we have the bona fides of both the peer host and the
# process making the request.
@@ -1215,14 +1292,17 @@ sub push_file_handler {
&Reply($client, \$reply, $userinput);
} else {
+ &logthis("push_file_handler $client is not valid");
&Failure( $client, "refused\n", $userinput);
}
return 1;
}
®ister_handler("pushfile", \&push_file_handler, 1, 0, 1);
+# The du_handler routine should be considered obsolete and is retained
+# for communication with legacy servers. Please see the du2_handler.
#
-# du - list the disk usuage of a directory recursively.
+# du - list the disk usage of a directory recursively.
#
# note: stolen code from the ls file handler
# under construction by Rick Banghart
@@ -1272,14 +1352,94 @@ sub du_handler {
}
®ister_handler("du", \&du_handler, 0, 1, 0);
+# Please also see the du_handler, which is obsoleted by du2.
+# du2_handler differs from du_handler in that required path to directory
+# provided by &propath() is prepended in the handler instead of on the
+# client side.
+#
+# du2 - list the disk usage of a directory recursively.
#
-# The ls_handler routine should be considered obosolete and is retained
-# for communication with legacy servers. Please see the ls2_handler.
+# Parameters:
+# $cmd - The command that dispatched us (du).
+# $tail - The tail of the request that invoked us.
+# $tail is a : separated list of the following:
+# - $ududir - directory path to list (before prepending)
+# - $getpropath = 1 if &propath() should prepend
+# - $uname - username to use for &propath or user dir
+# - $udom - domain to use for &propath or user dir
+# All are escaped.
+# $client - Socket open on the client.
+# Returns:
+# 1 - indicating that the daemon should not disconnect.
+# Side Effects:
+# The reply is written to $client.
+#
+
+sub du2_handler {
+ my ($cmd, $tail, $client) = @_;
+ my ($ududir,$getpropath,$uname,$udom) = map { &unescape($_) } (split(/:/, $tail));
+ my $userinput = "$cmd:$tail";
+ if (($ududir=~/\.\./) || (($ududir!~m|^/home/httpd/|) && (!$getpropath))) {
+ &Failure($client,"refused\n","$cmd:$tail");
+ return 1;
+ }
+ if ($getpropath) {
+ if (($uname =~ /^$LONCAPA::match_name$/) && ($udom =~ /^$LONCAPA::match_domain$/)) {
+ $ududir = &propath($udom,$uname).'/'.$ududir;
+ } else {
+ &Failure($client,"refused\n","$cmd:$tail");
+ return 1;
+ }
+ }
+ # Since $ududir could have some nasties in it,
+ # we will require that ududir is a valid
+ # directory. Just in case someone tries to
+ # slip us a line like .;(cd /home/httpd rm -rf*)
+ # etc.
+ #
+ if (-d $ududir) {
+ my $total_size=0;
+ my $code=sub {
+ if ($_=~/\.\d+\./) { return;}
+ if ($_=~/\.meta$/) { return;}
+ if (-d $_) { return;}
+ $total_size+=(stat($_))[7];
+ };
+ chdir($ududir);
+ find($code,$ududir);
+ $total_size=int($total_size/1024);
+ &Reply($client,\$total_size,"$cmd:$ududir");
+ } else {
+ &Failure($client, "bad_directory:$ududir\n","$cmd:$tail");
+ }
+ return 1;
+}
+®ister_handler("du2", \&du2_handler, 0, 1, 0);
+
+#
+# The ls_handler routine should be considered obsolete and is retained
+# for communication with legacy servers. Please see the ls3_handler.
#
# ls - list the contents of a directory. For each file in the
# selected directory the filename followed by the full output of
# the stat function is returned. The returned info for each
# file are separated by ':'. The stat fields are separated by &'s.
+#
+# If the requested path contains /../ or is:
+#
+# 1. for a directory, and the path does not begin with one of:
+# (a) /home/httpd/html/res/
+# (b) /home/httpd/html/userfiles/
+# (c) /home/httpd/lonUsers//<1>/<2>/<3>//userfiles
+# or is:
+#
+# 2. for a file, and the path (after prepending) does not begin with one of:
+# (a) /home/httpd/lonUsers//<1>/<2>/<3>//
+# (b) /home/httpd/html/res///
+# (c) /home/httpd/html/userfiles///
+#
+# the response will be "refused".
+#
# Parameters:
# $cmd - The command that dispatched us (ls).
# $ulsdir - The directory path to list... I'm not sure what this
@@ -1301,8 +1461,17 @@ sub ls_handler {
my $rights;
my $ulsout='';
my $ulsfn;
+ if ($ulsdir =~m{/\.\./}) {
+ &Failure($client,"refused\n",$userinput);
+ return 1;
+ }
if (-e $ulsdir) {
if(-d $ulsdir) {
+ unless (($ulsdir =~ m{^/home/httpd/html/(res/$LONCAPA::match_domain|userfiles/)}) ||
+ ($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/userfiles})) {
+ &Failure($client,"refused\n",$userinput);
+ return 1;
+ }
if (opendir(LSDIR,$ulsdir)) {
while ($ulsfn=readdir(LSDIR)) {
undef($obs);
@@ -1326,6 +1495,11 @@ sub ls_handler {
closedir(LSDIR);
}
} else {
+ unless (($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/}) ||
+ ($ulsdir =~ m{^/home/httpd/html/(?:res|userfiles)/$LONCAPA::match_domain/$LONCAPA::match_name/})) {
+ &Failure($client,"refused\n",$userinput);
+ return 1;
+ }
my @ulsstats=stat($ulsdir);
$ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';
}
@@ -1340,8 +1514,9 @@ sub ls_handler {
}
®ister_handler("ls", \&ls_handler, 0, 1, 0);
-#
-# Please also see the ls_handler, which this routine obosolets.
+# The ls2_handler routine should be considered obsolete and is retained
+# for communication with legacy servers. Please see the ls3_handler.
+# Please also see the ls_handler, which was itself obsoleted by ls2.
# ls2_handler differs from ls_handler in that it escapes its return
# values before concatenating them together with ':'s.
#
@@ -1349,6 +1524,22 @@ sub ls_handler {
# selected directory the filename followed by the full output of
# the stat function is returned. The returned info for each
# file are separated by ':'. The stat fields are separated by &'s.
+#
+# If the requested path contains /../ or is:
+#
+# 1. for a directory, and the path does not begin with one of:
+# (a) /home/httpd/html/res/
+# (b) /home/httpd/html/userfiles/
+# (c) /home/httpd/lonUsers//<1>/<2>/<3>//userfiles
+# or is:
+#
+# 2. for a file, and the path (after prepending) does not begin with one of:
+# (a) /home/httpd/lonUsers//<1>/<2>/<3>//
+# (b) /home/httpd/html/res///
+# (c) /home/httpd/html/userfiles///
+#
+# the response will be "refused".
+#
# Parameters:
# $cmd - The command that dispatched us (ls).
# $ulsdir - The directory path to list... I'm not sure what this
@@ -1369,8 +1560,17 @@ sub ls2_handler {
my $rights;
my $ulsout='';
my $ulsfn;
+ if ($ulsdir =~m{/\.\./}) {
+ &Failure($client,"refused\n",$userinput);
+ return 1;
+ }
if (-e $ulsdir) {
if(-d $ulsdir) {
+ unless (($ulsdir =~ m{^/home/httpd/html/(res/$LONCAPA::match_domain|userfiles/)}) ||
+ ($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/userfiles})) {
+ &Failure($client,"refused\n","$userinput");
+ return 1;
+ }
if (opendir(LSDIR,$ulsdir)) {
while ($ulsfn=readdir(LSDIR)) {
undef($obs);
@@ -1395,6 +1595,11 @@ sub ls2_handler {
closedir(LSDIR);
}
} else {
+ unless (($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/}) ||
+ ($ulsdir =~ m{^/home/httpd/html/(?:res|userfiles)/$LONCAPA::match_domain/$LONCAPA::match_name/})) {
+ &Failure($client,"refused\n",$userinput);
+ return 1;
+ }
my @ulsstats=stat($ulsdir);
$ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';
}
@@ -1406,6 +1611,282 @@ sub ls2_handler {
return 1;
}
®ister_handler("ls2", \&ls2_handler, 0, 1, 0);
+#
+# ls3 - list the contents of a directory. For each file in the
+# selected directory the filename followed by the full output of
+# the stat function is returned. The returned info for each
+# file are separated by ':'. The stat fields are separated by &'s.
+#
+# If the requested path (after prepending) contains /../ or is:
+#
+# 1. for a directory, and the path does not begin with one of:
+# (a) /home/httpd/html/res/
+# (b) /home/httpd/html/userfiles/
+# (c) /home/httpd/lonUsers//<1>/<2>/<3>//userfiles
+# (d) /home/httpd/html/priv/ and client is the homeserver
+#
+# or is:
+#
+# 2. for a file, and the path (after prepending) does not begin with one of:
+# (a) /home/httpd/lonUsers//<1>/<2>/<3>//
+# (b) /home/httpd/html/res///
+# (c) /home/httpd/html/userfiles///
+# (d) /home/httpd/html/priv/// and client is the homeserver
+#
+# the response will be "refused".
+#
+# Parameters:
+# $cmd - The command that dispatched us (ls).
+# $tail - The tail of the request that invoked us.
+# $tail is a : separated list of the following:
+# - $ulsdir - directory path to list (before prepending)
+# - $getpropath = 1 if &propath() should prepend
+# - $getuserdir = 1 if path to user dir in lonUsers should
+# prepend
+# - $alternate_root - path to prepend
+# - $uname - username to use for &propath or user dir
+# - $udom - domain to use for &propath or user dir
+# All of these except $getpropath and &getuserdir are escaped.
+# no_such_dir.
+# $client - Socket open on the client.
+# Returns:
+# 1 - indicating that the daemon should not disconnect.
+# Side Effects:
+# The reply is written to $client.
+#
+
+sub ls3_handler {
+ my ($cmd, $tail, $client) = @_;
+ my $userinput = "$cmd:$tail";
+ my ($ulsdir,$getpropath,$getuserdir,$alternate_root,$uname,$udom) =
+ split(/:/,$tail);
+ if (defined($ulsdir)) {
+ $ulsdir = &unescape($ulsdir);
+ }
+ if (defined($alternate_root)) {
+ $alternate_root = &unescape($alternate_root);
+ }
+ if (defined($uname)) {
+ $uname = &unescape($uname);
+ }
+ if (defined($udom)) {
+ $udom = &unescape($udom);
+ }
+
+ my $dir_root = $perlvar{'lonDocRoot'};
+ if (($getpropath) || ($getuserdir)) {
+ if (($uname =~ /^$LONCAPA::match_name$/) && ($udom =~ /^$LONCAPA::match_domain$/)) {
+ $dir_root = &propath($udom,$uname);
+ $dir_root =~ s/\/$//;
+ } else {
+ &Failure($client,"refused\n",$userinput);
+ return 1;
+ }
+ } elsif ($alternate_root ne '') {
+ $dir_root = $alternate_root;
+ }
+ if (($dir_root ne '') && ($dir_root ne '/')) {
+ if ($ulsdir =~ /^\//) {
+ $ulsdir = $dir_root.$ulsdir;
+ } else {
+ $ulsdir = $dir_root.'/'.$ulsdir;
+ }
+ }
+ if ($ulsdir =~m{/\.\./}) {
+ &Failure($client,"refused\n",$userinput);
+ return 1;
+ }
+ my $islocal;
+ my @machine_ids = &Apache::lonnet::current_machine_ids();
+ if (grep(/^\Q$clientname\E$/,@machine_ids)) {
+ $islocal = 1;
+ }
+ my $obs;
+ my $rights;
+ my $ulsout='';
+ my $ulsfn;
+ if (-e $ulsdir) {
+ if(-d $ulsdir) {
+ unless (($getpropath) || ($getuserdir) ||
+ ($ulsdir =~ m{^/home/httpd/html/(res/$LONCAPA::match_domain|userfiles/)}) ||
+ ($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/userfiles}) ||
+ (($ulsdir =~ m{^/home/httpd/html/priv/$LONCAPA::match_domain}) && ($islocal))) {
+ &Failure($client,"refused\n",$userinput);
+ return 1;
+ }
+ if (opendir(LSDIR,$ulsdir)) {
+ while ($ulsfn=readdir(LSDIR)) {
+ undef($obs);
+ undef($rights);
+ my @ulsstats=stat($ulsdir.'/'.$ulsfn);
+ #We do some obsolete checking here
+ if(-e $ulsdir.'/'.$ulsfn.".meta") {
+ open(FILE, $ulsdir.'/'.$ulsfn.".meta");
+ my @obsolete=;
+ foreach my $obsolete (@obsolete) {
+ if($obsolete =~ m/()(on|1)/) { $obs = 1; }
+ if($obsolete =~ m|()(default)|) {
+ $rights = 1;
+ }
+ }
+ }
+ my $tmp = $ulsfn.'&'.join('&',@ulsstats);
+ if ($obs eq '1') { $tmp.="&1"; } else { $tmp.="&0"; }
+ if ($rights eq '1') { $tmp.="&1"; } else { $tmp.="&0"; }
+ $ulsout.= &escape($tmp).':';
+ }
+ closedir(LSDIR);
+ }
+ } else {
+ unless (($getpropath) || ($getuserdir) ||
+ ($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/}) ||
+ ($ulsdir =~ m{^/home/httpd/html/(?:res|userfiles)/$LONCAPA::match_domain/$LONCAPA::match_name/}) ||
+ (($ulsdir =~ m{^/home/httpd/html/priv/$LONCAPA::match_domain/$LONCAPA::match_name/}) && ($islocal))) {
+ &Failure($client,"refused\n",$userinput);
+ return 1;
+ }
+ my @ulsstats=stat($ulsdir);
+ $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';
+ }
+ } else {
+ $ulsout='no_such_dir';
+ }
+ if ($ulsout eq '') { $ulsout='empty'; }
+ &Reply($client, \$ulsout, $userinput); # This supports debug logging.
+ return 1;
+}
+®ister_handler("ls3", \&ls3_handler, 0, 1, 0);
+
+sub read_lonnet_global {
+ my ($cmd,$tail,$client) = @_;
+ my $userinput = "$cmd:$tail";
+ my $requested = &Apache::lonnet::thaw_unescape($tail);
+ my $result;
+ my %packagevars = (
+ spareid => \%Apache::lonnet::spareid,
+ perlvar => \%Apache::lonnet::perlvar,
+ );
+ my %limit_to = (
+ perlvar => {
+ lonOtherAuthen => 1,
+ lonBalancer => 1,
+ lonVersion => 1,
+ lonSysEMail => 1,
+ lonHostID => 1,
+ lonRole => 1,
+ lonDefDomain => 1,
+ lonLoadLim => 1,
+ lonUserLoadLim => 1,
+ }
+ );
+ if (ref($requested) eq 'HASH') {
+ foreach my $what (keys(%{$requested})) {
+ my $response;
+ my $items = {};
+ if (exists($packagevars{$what})) {
+ if (ref($limit_to{$what}) eq 'HASH') {
+ foreach my $varname (keys(%{$packagevars{$what}})) {
+ if ($limit_to{$what}{$varname}) {
+ $items->{$varname} = $packagevars{$what}{$varname};
+ }
+ }
+ } else {
+ $items = $packagevars{$what};
+ }
+ if ($what eq 'perlvar') {
+ if (!exists($packagevars{$what}{'lonBalancer'})) {
+ if ($dist =~ /^(centos|rhes|fedora|scientific|oracle|rocky|alma)/) {
+ my $othervarref=LONCAPA::Configuration::read_conf('httpd.conf');
+ if (ref($othervarref) eq 'HASH') {
+ $items->{'lonBalancer'} = $othervarref->{'lonBalancer'};
+ }
+ }
+ }
+ }
+ $response = &Apache::lonnet::freeze_escape($items);
+ }
+ $result .= &escape($what).'='.$response.'&';
+ }
+ }
+ $result =~ s/\&$//;
+ &Reply($client,\$result,$userinput);
+ return 1;
+}
+®ister_handler("readlonnetglobal", \&read_lonnet_global, 0, 1, 0);
+
+sub server_devalidatecache_handler {
+ my ($cmd,$tail,$client) = @_;
+ my $userinput = "$cmd:$tail";
+ my $items = &unescape($tail);
+ my @cached = split(/\&/,$items);
+ foreach my $key (@cached) {
+ if ($key =~ /:/) {
+ my ($name,$id) = map { &unescape($_); } split(/:/,$key);
+ &Apache::lonnet::devalidate_cache_new($name,$id);
+ }
+ }
+ my $result = 'ok';
+ &Reply($client,\$result,$userinput);
+ return 1;
+}
+®ister_handler("devalidatecache", \&server_devalidatecache_handler, 0, 1, 0);
+
+sub server_timezone_handler {
+ my ($cmd,$tail,$client) = @_;
+ my $userinput = "$cmd:$tail";
+ my $timezone;
+ my $clockfile = '/etc/sysconfig/clock'; # Fedora/CentOS/SuSE
+ my $tzfile = '/etc/timezone'; # Debian/Ubuntu
+ if (-e $clockfile) {
+ if (open(my $fh,"<$clockfile")) {
+ while (<$fh>) {
+ next if (/^[\#\s]/);
+ if (/^(?:TIME)?ZONE\s*=\s*['"]?\s*([\w\/]+)/) {
+ $timezone = $1;
+ last;
+ }
+ }
+ close($fh);
+ }
+ } elsif (-e $tzfile) {
+ if (open(my $fh,"<$tzfile")) {
+ $timezone = <$fh>;
+ close($fh);
+ chomp($timezone);
+ if ($timezone =~ m{^Etc/(\w+)$}) {
+ $timezone = $1;
+ }
+ }
+ }
+ &Reply($client,\$timezone,$userinput); # This supports debug logging.
+ return 1;
+}
+®ister_handler("servertimezone", \&server_timezone_handler, 0, 1, 0);
+
+sub server_loncaparev_handler {
+ my ($cmd,$tail,$client) = @_;
+ my $userinput = "$cmd:$tail";
+ &Reply($client,\$perlvar{'lonVersion'},$userinput);
+ return 1;
+}
+®ister_handler("serverloncaparev", \&server_loncaparev_handler, 0, 1, 0);
+
+sub server_homeID_handler {
+ my ($cmd,$tail,$client) = @_;
+ my $userinput = "$cmd:$tail";
+ &Reply($client,\$perlvar{'lonHostID'},$userinput);
+ return 1;
+}
+®ister_handler("serverhomeID", \&server_homeID_handler, 0, 1, 0);
+
+sub server_distarch_handler {
+ my ($cmd,$tail,$client) = @_;
+ my $userinput = "$cmd:$tail";
+ my $reply = &distro_and_arch();
+ &Reply($client,\$reply,$userinput);
+ return 1;
+}
+®ister_handler("serverdistarch", \&server_distarch_handler, 0, 1, 0);
# Process a reinit request. Reinit requests that either
# lonc or lond be reinitialized so that an updated
@@ -1514,15 +1995,51 @@ sub authenticate_handler {
# udom - User's domain.
# uname - Username.
# upass - User's password.
+ # checkdefauth - Pass to validate_user() to try authentication
+ # with default auth type(s) if no user account.
+ # clientcancheckhost - Passed by clients with functionality in lonauth.pm
+ # to check if session can be hosted.
- my ($udom,$uname,$upass)=split(/:/,$tail);
- &Debug(" Authenticate domain = $udom, user = $uname, password = $upass");
+ my ($udom, $uname, $upass, $checkdefauth, $clientcancheckhost)=split(/:/,$tail);
+ &Debug(" Authenticate domain = $udom, user = $uname, password = $upass, checkdefauth = $checkdefauth");
chomp($upass);
$upass=&unescape($upass);
- my $pwdcorrect = &validate_user($udom, $uname, $upass);
+ my $pwdcorrect = &validate_user($udom,$uname,$upass,$checkdefauth);
if($pwdcorrect) {
- &Reply( $client, "authorized\n", $userinput);
+ my $canhost = 1;
+ unless ($clientcancheckhost) {
+ my $uprimary_id = &Apache::lonnet::domain($udom,'primary');
+ my $uint_dom = &Apache::lonnet::internet_dom($uprimary_id);
+ my @intdoms;
+ my $internet_names = &Apache::lonnet::get_internet_names($clientname);
+ if (ref($internet_names) eq 'ARRAY') {
+ @intdoms = @{$internet_names};
+ }
+ unless ($uint_dom ne '' && grep(/^\Q$uint_dom\E$/,@intdoms)) {
+ my ($remote,$hosted);
+ my $remotesession = &get_usersession_config($udom,'remotesession');
+ if (ref($remotesession) eq 'HASH') {
+ $remote = $remotesession->{'remote'};
+ }
+ my $hostedsession = &get_usersession_config($clienthomedom,'hostedsession');
+ if (ref($hostedsession) eq 'HASH') {
+ $hosted = $hostedsession->{'hosted'};
+ }
+ my $loncaparev = $clientversion;
+ if ($loncaparev eq '') {
+ $loncaparev = $Apache::lonnet::loncaparevs{$clientname};
+ }
+ $canhost = &Apache::lonnet::can_host_session($udom,$clientname,
+ $loncaparev,
+ $remote,$hosted);
+ }
+ }
+ if ($canhost) {
+ &Reply( $client, "authorized\n", $userinput);
+ } else {
+ &Reply( $client, "not_allowed_to_host\n", $userinput);
+ }
#
# Bad credentials: Failed to authorize
#
@@ -1567,8 +2084,9 @@ sub change_password_handler {
# npass - New password.
# context - Context in which this was called
# (preferences or reset_by_email).
+ # lonhost - HostID of server where request originated
- my ($udom,$uname,$upass,$npass,$context)=split(/:/,$tail);
+ my ($udom,$uname,$upass,$npass,$context,$lonhost)=split(/:/,$tail);
$upass=&unescape($upass);
$npass=&unescape($npass);
@@ -1577,24 +2095,102 @@ sub change_password_handler {
# First require that the user can be authenticated with their
# old password unless context was 'reset_by_email':
- my $validated;
+ my ($validated,$failure);
if ($context eq 'reset_by_email') {
- $validated = 1;
+ if ($lonhost eq '') {
+ $failure = 'invalid_client';
+ } else {
+ $validated = 1;
+ }
} else {
$validated = &validate_user($udom, $uname, $upass);
}
if($validated) {
my $realpasswd = &get_auth_type($udom, $uname); # Defined since authd.
-
my ($howpwd,$contentpwd)=split(/:/,$realpasswd);
+ my $notunique;
if ($howpwd eq 'internal') {
&Debug("internal auth");
- my $salt=time;
- $salt=substr($salt,6,2);
- my $ncpass=crypt($npass,$salt);
- if(&rewrite_password_file($udom, $uname, "internal:$ncpass")) {
- &logthis("Result of password change for "
- ."$uname: pwchange_success");
+ my $ncpass = &hash_passwd($udom,$npass);
+ my (undef,$method,@rest) = split(/!/,$contentpwd);
+ if ($method eq 'bcrypt') {
+ my %passwdconf = &Apache::lonnet::get_passwdconf($udom);
+ if (($passwdconf{'numsaved'}) && ($passwdconf{'numsaved'} =~ /^\d+$/)) {
+ my @oldpasswds;
+ my $userpath = &propath($udom,$uname);
+ my $fullpath = $userpath.'/oldpasswds';
+ if (-d $userpath) {
+ my @oldfiles;
+ if (-e $fullpath) {
+ if (opendir(my $dir,$fullpath)) {
+ (@oldfiles) = grep(/^\d+$/,readdir($dir));
+ closedir($dir);
+ }
+ if (@oldfiles) {
+ @oldfiles = sort { $b <=> $a } (@oldfiles);
+ my $numremoved = 0;
+ for (my $i=0; $i<@oldfiles; $i++) {
+ if ($i>=$passwdconf{'numsaved'}) {
+ if (-f "$fullpath/$oldfiles[$i]") {
+ if (unlink("$fullpath/$oldfiles[$i]")) {
+ $numremoved ++;
+ }
+ }
+ } elsif (open(my $fh,'<',"$fullpath/$oldfiles[$i]")) {
+ while (my $line = <$fh>) {
+ push(@oldpasswds,$line);
+ }
+ close($fh);
+ }
+ }
+ if ($numremoved) {
+ &logthis("unlinked $numremoved old password files for $uname:$udom");
+ }
+ }
+ }
+ push(@oldpasswds,$contentpwd);
+ foreach my $item (@oldpasswds) {
+ my (undef,$method,@rest) = split(/!/,$item);
+ if ($method eq 'bcrypt') {
+ my $result = &hash_passwd($udom,$npass,@rest);
+ if ($result eq $item) {
+ $notunique = 1;
+ last;
+ }
+ }
+ }
+ unless ($notunique) {
+ unless (-e $fullpath) {
+ if (&mkpath("$fullpath/")) {
+ chmod(0700,$fullpath);
+ }
+ }
+ if (-d $fullpath) {
+ my $now = time;
+ if (open(my $fh,'>',"$fullpath/$now")) {
+ print $fh $contentpwd;
+ close($fh);
+ chmod(0400,"$fullpath/$now");
+ }
+ }
+ }
+ }
+ }
+ }
+ if ($notunique) {
+ my $msg="Result of password change for $uname:$udom - password matches one used before";
+ if ($lonhost) {
+ $msg .= " - request originated from: $lonhost";
+ }
+ &logthis($msg);
+ &Reply($client, "prioruse\n", $userinput);
+ } elsif (&rewrite_password_file($udom, $uname, "internal:$ncpass")) {
+ my $msg="Result of password change for $uname: pwchange_success";
+ if ($lonhost) {
+ $msg .= " - request originated from: $lonhost";
+ }
+ &logthis($msg);
+ &update_passwd_history($uname,$udom,$howpwd,$context);
&Reply($client, "ok\n", $userinput);
} else {
&logthis("Unable to open $uname passwd "
@@ -1603,6 +2199,9 @@ sub change_password_handler {
}
} elsif ($howpwd eq 'unix' && $context ne 'reset_by_email') {
my $result = &change_unix_password($uname, $npass);
+ if ($result eq 'ok') {
+ &update_passwd_history($uname,$udom,$howpwd,$context);
+ }
&logthis("Result of password change for $uname: ".
$result);
&Reply($client, \$result, $userinput);
@@ -1613,15 +2212,49 @@ sub change_password_handler {
#
&Failure( $client, "auth_mode_error\n", $userinput);
}
-
} else {
- &Failure( $client, "non_authorized\n", $userinput);
+ if ($failure eq '') {
+ $failure = 'non_authorized';
+ }
+ &Failure( $client, "$failure\n", $userinput);
}
return 1;
}
®ister_handler("passwd", \&change_password_handler, 1, 1, 0);
+sub hash_passwd {
+ my ($domain,$plainpass,@rest) = @_;
+ my ($salt,$cost);
+ if (@rest) {
+ $cost = $rest[0];
+ # salt is first 22 characters, base-64 encoded by bcrypt
+ my $plainsalt = substr($rest[1],0,22);
+ $salt = Crypt::Eksblowfish::Bcrypt::de_base64($plainsalt);
+ } else {
+ my %domdefaults = &Apache::lonnet::get_domain_defaults($domain);
+ my $defaultcost = $domdefaults{'intauth_cost'};
+ if (($defaultcost eq '') || ($defaultcost =~ /D/)) {
+ $cost = 10;
+ } else {
+ $cost = $defaultcost;
+ }
+ # Generate random 16-octet base64 salt
+ $salt = "";
+ $salt .= pack("C", int rand(256)) for 1..16;
+ }
+ my $hash = &Crypt::Eksblowfish::Bcrypt::bcrypt_hash({
+ key_nul => 1,
+ cost => $cost,
+ salt => $salt,
+ }, Digest::SHA::sha512(Encode::encode('UTF-8',$plainpass)));
+
+ my $result = join("!", "", "bcrypt", sprintf("%02d",$cost),
+ &Crypt::Eksblowfish::Bcrypt::en_base64($salt).
+ &Crypt::Eksblowfish::Bcrypt::en_base64($hash));
+ return $result;
+}
+
#
# Create a new user. User in this case means a lon-capa user.
# The user must either already exist in some authentication realm
@@ -1665,7 +2298,8 @@ sub add_user_handler {
."makeuser";
}
unless ($fperror) {
- my $result=&make_passwd_file($uname, $umode,$npass, $passfilename);
+ my $result=&make_passwd_file($uname,$udom,$umode,$npass,
+ $passfilename,'makeuser');
&Reply($client,\$result, $userinput); #BUGBUG - could be fail
} else {
&Failure($client, \$fperror, $userinput);
@@ -1726,36 +2360,30 @@ sub change_authentication_handler {
my $passfilename = &password_path($udom, $uname);
if ($passfilename) { # Not allowed to create a new user!!
# If just changing the unix passwd. need to arrange to run
- # passwd since otherwise make_passwd_file will run
- # lcuseradd which fails if an account already exists
- # (to prevent an unscrupulous LONCAPA admin from stealing
- # an existing account by overwriting it as a LonCAPA account).
+ # passwd since otherwise make_passwd_file will fail as
+ # creation of unix authenticated users is no longer supported
+ # except from the command line, when running make_domain_coordinator.pl
if(($oldauth =~/^unix/) && ($umode eq "unix")) {
my $result = &change_unix_password($uname, $npass);
&logthis("Result of password change for $uname: ".$result);
if ($result eq "ok") {
+ &update_passwd_history($uname,$udom,$umode,'changeuserauth');
&Reply($client, \$result);
} else {
&Failure($client, \$result);
}
} else {
- my $result=&make_passwd_file($uname, $umode,$npass,$passfilename);
+ my $result=&make_passwd_file($uname,$udom,$umode,$npass,
+ $passfilename,'changeuserauth');
#
# If the current auth mode is internal, and the old auth mode was
# unix, or krb*, and the user is an author for this domain,
# re-run manage_permissions for that role in order to be able
# to take ownership of the construction space back to www:www
#
-
-
- if( (($oldauth =~ /^unix/) && ($umode eq "internal")) ||
- (($oldauth =~ /^internal/) && ($umode eq "unix")) ) {
- if(&is_author($udom, $uname)) {
- &Debug(" Need to manage author permissions...");
- &manage_permissions("/$udom/_au", $udom, $uname, "$umode:");
- }
- }
+
+
&Reply($client, \$result, $userinput);
}
@@ -1768,6 +2396,17 @@ sub change_authentication_handler {
}
®ister_handler("changeuserauth", \&change_authentication_handler, 1,1, 0);
+sub update_passwd_history {
+ my ($uname,$udom,$umode,$context) = @_;
+ my $proname=&propath($udom,$uname);
+ my $now = time;
+ if (open(my $fh,">>$proname/passwd.log")) {
+ print $fh "$now:$umode:$context\n";
+ close($fh);
+ }
+ return;
+}
+
#
# Determines if this is the home server for a user. The home server
# for a user will have his/her lon-capa passwd file. Therefore all we need
@@ -1802,16 +2441,10 @@ sub is_home_handler {
®ister_handler("home", \&is_home_handler, 0,1,0);
#
-# Process an update request for a resource?? I think what's going on here is
-# that a resource has been modified that we hold a subscription to.
+# Process an update request for a resource.
+# A resource has been modified that we hold a subscription to.
# If the resource is not local, then we must update, or at least invalidate our
# cached copy of the resource.
-# FUTURE WORK:
-# I need to look at this logic carefully. My druthers would be to follow
-# typical caching logic, and simple invalidate the cache, drop any subscription
-# an let the next fetch start the ball rolling again... however that may
-# actually be more difficult than it looks given the complex web of
-# proxy servers.
# Parameters:
# $cmd - The command that got us here.
# $tail - Tail of the command (remaining parameters).
@@ -1835,20 +2468,30 @@ sub update_resource_handler {
my $ownership=ishome($fname);
if ($ownership eq 'not_owner') {
if (-e $fname) {
+ # Delete preview file, if exists
+ unlink("$fname.tmp");
+ # Get usage stats
my ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size,
$atime,$mtime,$ctime,$blksize,$blocks)=stat($fname);
my $now=time;
my $since=$now-$atime;
+ # If the file has not been used within lonExpire seconds,
+ # unsubscribe from it and delete local copy
if ($since>$perlvar{'lonExpire'}) {
my $reply=&Apache::lonnet::reply("unsub:$fname","$clientname");
&devalidate_meta_cache($fname);
unlink("$fname");
unlink("$fname.meta");
} else {
+ # Yes, this is in active use. Get a fresh copy. Since it might be in
+ # very active use and huge (like a movie), copy it to "in.transfer" filename first.
my $transname="$fname.in.transfer";
my $remoteurl=&Apache::lonnet::reply("sub:$fname","$clientname");
my $response;
- alarm(120);
+# FIXME: cannot replicate files that take more than two minutes to transfer?
+# alarm(120);
+# FIXME: this should use the LWP mechanism, not internal alarms.
+ alarm(1200);
{
my $ua=new LWP::UserAgent;
my $request=new HTTP::Request('GET',"$remoteurl");
@@ -1856,11 +2499,17 @@ sub update_resource_handler {
}
alarm(0);
if ($response->is_error()) {
- unlink($transname);
+ my $reply=&Apache::lonnet::reply("unsub:$fname","$clientname");
+ &devalidate_meta_cache($fname);
+ if (-e $transname) {
+ unlink($transname);
+ }
+ unlink($fname);
my $message=$response->status_line;
&logthis("LWP GET: $message for $fname ($remoteurl)");
} else {
if ($remoteurl!~/\.meta$/) {
+# FIXME: isn't there an internal LWP mechanism for this?
alarm(120);
{
my $ua=new LWP::UserAgent;
@@ -1872,6 +2521,7 @@ sub update_resource_handler {
}
alarm(0);
}
+ # we successfully transfered, copy file over to real name
rename($transname,$fname);
&devalidate_meta_cache($fname);
}
@@ -1933,7 +2583,10 @@ sub fetch_user_file_handler {
my $destname=$udir.'/'.$ufile;
my $transname=$udir.'/'.$ufile.'.in.transit';
- my $remoteurl='http://'.$clientip.'/userfiles/'.$fname;
+ my $clientprotocol=$Apache::lonnet::protocol{$clientname};
+ $clientprotocol = 'http' if ($clientprotocol ne 'https');
+ my $clienthost = &Apache::lonnet::hostname($clientname);
+ my $remoteurl=$clientprotocol.'://'.$clienthost.'/userfiles/'.$fname;
my $response;
Debug("Remote URL : $remoteurl Transfername $transname Destname: $destname");
alarm(120);
@@ -1955,6 +2608,24 @@ sub fetch_user_file_handler {
unlink($transname);
&Failure($client, "failed\n", $userinput);
} else {
+ if ($fname =~ /^default.+\.(page|sequence)$/) {
+ my ($major,$minor) = split(/\./,$clientversion);
+ if (($major < 2) || ($major == 2 && $minor < 11)) {
+ my $now = time;
+ &Apache::lonnet::do_cache_new('crschange',$udom.'_'.$uname,$now,600);
+ my $key = &escape('internal.contentchange');
+ my $what = "$key=$now";
+ my $hashref = &tie_user_hash($udom,$uname,'environment',
+ &GDBM_WRCREAT(),"P",$what);
+ if ($hashref) {
+ $hashref->{$key}=$now;
+ if (!&untie_user_hash($hashref)) {
+ &logthis("error: ".($!+0)." untie (GDBM) failed ".
+ "when updating internal.contentchange");
+ }
+ }
+ }
+ }
&Reply($client, "ok\n", $userinput);
}
}
@@ -1991,11 +2662,20 @@ sub remove_user_file_handler {
if (-e $file) {
#
# If the file is a regular file unlink is fine...
- # However it's possible the client wants a dir.
- # removed, in which case rmdir is more approprate:
+ # However it's possible the client wants a dir
+ # removed, in which case rmdir is more appropriate
+ # Note: rmdir will only remove an empty directory.
#
if (-f $file){
unlink($file);
+ # for html files remove the associated .bak file
+ # which may have been created by the editor.
+ if ($ufile =~ m{^((docs|supplemental)/(?:\d+|default)/\d+(?:|/.+)/)[^/]+\.x?html?$}i) {
+ my $path = $1;
+ if (-e $file.'.bak') {
+ unlink($file.'.bak');
+ }
+ }
} elsif(-d $file) {
rmdir($file);
}
@@ -2109,7 +2789,6 @@ sub user_has_session_handler {
my ($udom, $uname) = map { &unescape($_) } (split(/:/, $tail));
- &logthis("Looking for $udom $uname");
opendir(DIR,$perlvar{'lonIDsDir'});
my $filename;
while ($filename=readdir(DIR)) {
@@ -2141,17 +2820,17 @@ sub token_auth_user_file_handler {
my ($fname, $session) = split(/:/, $tail);
chomp($session);
- my $reply="non_auth\n";
+ my $reply="non_auth";
my $file = $perlvar{'lonIDsDir'}.'/'.$session.'.id';
if (open(ENVIN,"$file")) {
flock(ENVIN,LOCK_SH);
tie(my %disk_env,'GDBM_File',"$file",&GDBM_READER(),0640);
if (exists($disk_env{"userfile.$fname"})) {
- $reply="ok\n";
+ $reply="ok";
} else {
foreach my $envname (keys(%disk_env)) {
if ($envname=~ m|^userfile\.\Q$fname\E|) {
- $reply="ok\n";
+ $reply="ok";
last;
}
}
@@ -2359,6 +3038,10 @@ sub newput_user_profile_entry {
foreach my $pair (@pairs) {
my ($key,$value)=split(/=/,$pair);
if (exists($hashref->{$key})) {
+ if (!&untie_user_hash($hashref)) {
+ &logthis("error: ".($!+0)." untie (GDBM) failed ".
+ "while attempting newput - early out as key exists");
+ }
&Failure($client, "key_exists: ".$key."\n",$userinput);
return 1;
}
@@ -2610,7 +3293,8 @@ sub get_profile_entry {
#
# Parameters:
# $cmd - Command keyword of request (eget).
-# $tail - Tail of the command. See GetProfileEntry
# for more information about this.
+# $tail - Tail of the command. See GetProfileEntry
+# for more information about this.
# $client - File open on the client.
# Returns:
# 1 - Continue processing
@@ -2828,6 +3512,9 @@ sub dump_profile_database {
# that is matched against
# database keywords to do
# selective dumps.
+# range - optional range of entries
+# e.g., 10-20 would return the
+# 10th to 19th items, etc.
# $client - Channel open on the client.
# Returns:
# 1 - Continue processing.
@@ -2837,62 +3524,59 @@ sub dump_profile_database {
sub dump_with_regexp {
my ($cmd, $tail, $client) = @_;
+ my $res = LONCAPA::Lond::dump_with_regexp($tail, $clientversion);
- my $userinput = "$cmd:$tail";
-
- my ($udom,$uname,$namespace,$regexp,$range)=split(/:/,$tail);
- if (defined($regexp)) {
- $regexp=&unescape($regexp);
- } else {
- $regexp='.';
- }
- my ($start,$end);
- if (defined($range)) {
- if ($range =~/^(\d+)\-(\d+)$/) {
- ($start,$end) = ($1,$2);
- } elsif ($range =~/^(\d+)$/) {
- ($start,$end) = (0,$1);
- } else {
- undef($range);
- }
- }
- my $hashref = &tie_user_hash($udom, $uname, $namespace,
- &GDBM_READER());
- if ($hashref) {
- my $qresult='';
- my $count=0;
- while (my ($key,$value) = each(%$hashref)) {
- if ($regexp eq '.') {
- $count++;
- if (defined($range) && $count >= $end) { last; }
- if (defined($range) && $count < $start) { next; }
- $qresult.=$key.'='.$value.'&';
- } else {
- my $unescapeKey = &unescape($key);
- if (eval('$unescapeKey=~/$regexp/')) {
- $count++;
- if (defined($range) && $count >= $end) { last; }
- if (defined($range) && $count < $start) { next; }
- $qresult.="$key=$value&";
- }
- }
- }
- if (&untie_user_hash($hashref)) {
- chop($qresult);
- &Reply($client, \$qresult, $userinput);
- } else {
- &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
- "while attempting dump\n", $userinput);
- }
+ if ($res =~ /^error:/) {
+ &Failure($client, \$res, "$cmd:$tail");
} else {
- &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
- "while attempting dump\n", $userinput);
+ &Reply($client, \$res, "$cmd:$tail");
}
return 1;
}
®ister_handler("dump", \&dump_with_regexp, 0, 1, 0);
+#
+# Process the encrypted dump request. Original call should
+# be from lonnet::dump() with seventh arg ($encrypt) set to
+# 1, to ensure that both request and response are encrypted.
+#
+# Parameters:
+# $cmd - Command keyword of request (edump).
+# $tail - Tail of the command.
+# See &dump_with_regexp for more
+# information about this.
+# $client - File open on the client.
+# Returns:
+# 1 - Continue processing
+# 0 - server should exit.
+#
+
+sub encrypted_dump_with_regexp {
+ my ($cmd, $tail, $client) = @_;
+ my $res = LONCAPA::Lond::dump_with_regexp($tail, $clientversion);
+
+ if ($res =~ /^error:/) {
+ Failure($client, \$res, "$cmd:$tail");
+ } else {
+ if ($cipher) {
+ my $cmdlength=length($res);
+ $res.=" ";
+ my $encres='';
+ for (my $encidx=0;$encidx<=$cmdlength;$encidx+=8) {
+ $encres.= unpack("H16",
+ $cipher->encrypt(substr($res,
+ $encidx,
+ 8)));
+ }
+ &Reply( $client,"enc:$cmdlength:$encres\n","$cmd:$tail");
+ } else {
+ &Failure( $client, "error:no_key\n","$cmd:$tail");
+ }
+ }
+}
+®ister_handler("edump", \&encrypted_dump_with_regexp, 0, 1, 0);
+
# Store a set of key=value pairs associated with a versioned name.
#
# Parameters:
@@ -2903,6 +3587,9 @@ sub dump_with_regexp {
# namespace - Name of the database being modified
# rid - Resource keyword to modify.
# what - new value associated with rid.
+# laststore - (optional) version=timestamp
+# for most recent transaction for rid
+# in namespace, when cstore was called
#
# $client - Socket open on the client.
#
@@ -2911,23 +3598,47 @@ sub dump_with_regexp {
# 1 (keep on processing).
# Side-Effects:
# Writes to the client
+# Successful storage will cause either 'ok', or, if $laststore was included
+# in the tail of the request, and the version number for the last transaction
+# is larger than the version in $laststore, delay:$numtrans , where $numtrans
+# is the number of store evevnts recorded for rid in namespace since
+# lonnet::store() was called by the client.
+#
sub store_handler {
my ($cmd, $tail, $client) = @_;
my $userinput = "$cmd:$tail";
- my ($udom,$uname,$namespace,$rid,$what) =split(/:/,$tail);
+ chomp($tail);
+ my ($udom,$uname,$namespace,$rid,$what,$laststore) =split(/:/,$tail);
if ($namespace ne 'roles') {
- chomp($what);
my @pairs=split(/\&/,$what);
my $hashref = &tie_user_hash($udom, $uname, $namespace,
&GDBM_WRCREAT(), "S",
"$rid:$what");
if ($hashref) {
my $now = time;
- my @previouskeys=split(/&/,$hashref->{"keys:$rid"});
- my $key;
+ my $numtrans;
+ if ($laststore) {
+ my ($previousversion,$previoustime) = split(/\=/,$laststore);
+ my ($lastversion,$lasttime) = (0,0);
+ $lastversion = $hashref->{"version:$rid"};
+ if ($lastversion) {
+ $lasttime = $hashref->{"$lastversion:$rid:timestamp"};
+ }
+ if (($previousversion) && ($previousversion !~ /\D/)) {
+ if (($lastversion > $previousversion) && ($lasttime >= $previoustime)) {
+ $numtrans = $lastversion - $previousversion;
+ }
+ } elsif ($lastversion) {
+ $numtrans = $lastversion;
+ }
+ if ($numtrans) {
+ $numtrans =~ s/D//g;
+ }
+ }
+
$hashref->{"version:$rid"}++;
my $version=$hashref->{"version:$rid"};
my $allkeys='';
@@ -2940,7 +3651,11 @@ sub store_handler {
$allkeys.='timestamp';
$hashref->{"$version:keys:$rid"}=$allkeys;
if (&untie_user_hash($hashref)) {
- &Reply($client, "ok\n", $userinput);
+ my $msg = 'ok';
+ if ($numtrans) {
+ $msg = 'delay:'.$numtrans;
+ }
+ &Reply($client, "$msg\n", $userinput);
} else {
&Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
"while attempting store\n", $userinput);
@@ -3202,6 +3917,37 @@ sub send_query_handler {
my ($query,$arg1,$arg2,$arg3)=split(/\:/,$tail);
$query=~s/\n*$//g;
+ if (($query eq 'usersearch') || ($query eq 'instdirsearch')) {
+ my $usersearchconf = &get_usersearch_config($currentdomainid,'directorysrch');
+ my $earlyout;
+ if (ref($usersearchconf) eq 'HASH') {
+ if ($currentdomainid eq $clienthomedom) {
+ if ($query eq 'usersearch') {
+ if ($usersearchconf->{'lcavailable'} eq '0') {
+ $earlyout = 1;
+ }
+ } else {
+ if ($usersearchconf->{'available'} eq '0') {
+ $earlyout = 1;
+ }
+ }
+ } else {
+ if ($query eq 'usersearch') {
+ if ($usersearchconf->{'lclocalonly'}) {
+ $earlyout = 1;
+ }
+ } else {
+ if ($usersearchconf->{'localonly'}) {
+ $earlyout = 1;
+ }
+ }
+ }
+ }
+ if ($earlyout) {
+ &Reply($client, "query_not_authorized\n");
+ return 1;
+ }
+ }
&Reply($client, "". &sql_reply("$clientname\&$query".
"\&$arg1"."\&$arg2"."\&$arg3")."\n",
$userinput);
@@ -3312,7 +4058,7 @@ sub put_course_id_handler {
my @new_items = split(/:/,$courseinfo,-1);
my %storehash;
for (my $i=0; $i<@new_items; $i++) {
- $storehash{$items[$i]} = $new_items[$i];
+ $storehash{$items[$i]} = &unescape($new_items[$i]);
}
$hashref->{$key} =
&Apache::lonnet::freeze_escape(\%storehash);
@@ -3426,14 +4172,40 @@ sub put_course_id_hash_handler {
# will be returned. Pre-2.2.0 legacy entries from
# nohist_courseiddump will only contain usernames.
# type - optional parameter for selection
-# regexp_ok - if true, allow the supplied institutional code
-# filter to behave as a regular expression.
+# regexp_ok - if 1 or -1 allow the supplied institutional code
+# filter to behave as a regular expression:
+# 1 will not exclude the course if the instcode matches the RE
+# -1 will exclude the course if the instcode matches the RE
# rtn_as_hash - whether to return the information available for
# each matched item as a frozen hash of all
# key, value pairs in the item's hash, or as a
# colon-separated list of (in order) description,
# institutional code, and course owner.
-#
+# selfenrollonly - filter by courses allowing self-enrollment
+# now or in the future (selfenrollonly = 1).
+# catfilter - filter by course category, assigned to a course
+# using manually defined categories (i.e., not
+# self-cataloging based on on institutional code).
+# showhidden - include course in results even if course
+# was set to be excluded from course catalog (DC only).
+# caller - if set to 'coursecatalog', courses set to be hidden
+# from course catalog will be excluded from results (unless
+# overridden by "showhidden".
+# cloner - escaped username:domain of course cloner (if picking course to
+# clone).
+# cc_clone_list - escaped comma separated list of courses for which
+# course cloner has active CC role (and so can clone
+# automatically).
+# cloneonly - filter by courses for which cloner has rights to clone.
+# createdbefore - include courses for which creation date preceeded this date.
+# createdafter - include courses for which creation date followed this date.
+# creationcontext - include courses created in specified context
+#
+# domcloner - flag to indicate if user can create CCs in course's domain.
+# If so, ability to clone course is automatic.
+# hasuniquecode - filter by courses for which a six character unique code has
+# been set.
+#
# $client - The socket open on the client.
# Returns:
# 1 - Continue processing.
@@ -3444,7 +4216,11 @@ sub dump_course_id_handler {
my $userinput = "$cmd:$tail";
my ($udom,$since,$description,$instcodefilter,$ownerfilter,$coursefilter,
- $typefilter,$regexp_ok,$rtn_as_hash) =split(/:/,$tail);
+ $typefilter,$regexp_ok,$rtn_as_hash,$selfenrollonly,$catfilter,$showhidden,
+ $caller,$cloner,$cc_clone_list,$cloneonly,$createdbefore,$createdafter,
+ $creationcontext,$domcloner,$hasuniquecode) =split(/:/,$tail);
+ my $now = time;
+ my ($cloneruname,$clonerudom,%cc_clone);
if (defined($description)) {
$description=&unescape($description);
} else {
@@ -3484,8 +4260,42 @@ sub dump_course_id_handler {
if (defined($regexp_ok)) {
$regexp_ok=&unescape($regexp_ok);
}
+ if (defined($catfilter)) {
+ $catfilter=&unescape($catfilter);
+ }
+ if (defined($cloner)) {
+ $cloner = &unescape($cloner);
+ ($cloneruname,$clonerudom) = ($cloner =~ /^($LONCAPA::match_username):($LONCAPA::match_domain)$/);
+ }
+ if (defined($cc_clone_list)) {
+ $cc_clone_list = &unescape($cc_clone_list);
+ my @cc_cloners = split('&',$cc_clone_list);
+ foreach my $cid (@cc_cloners) {
+ my ($clonedom,$clonenum) = split(':',$cid);
+ next if ($clonedom ne $udom);
+ $cc_clone{$clonedom.'_'.$clonenum} = 1;
+ }
+ }
+ if ($createdbefore ne '') {
+ $createdbefore = &unescape($createdbefore);
+ } else {
+ $createdbefore = 0;
+ }
+ if ($createdafter ne '') {
+ $createdafter = &unescape($createdafter);
+ } else {
+ $createdafter = 0;
+ }
+ if ($creationcontext ne '') {
+ $creationcontext = &unescape($creationcontext);
+ } else {
+ $creationcontext = '.';
+ }
+ unless ($hasuniquecode) {
+ $hasuniquecode = '.';
+ }
my $unpack = 1;
- if ($description eq '.' && $instcodefilter eq '.' && $coursefilter eq '.' &&
+ if ($description eq '.' && $instcodefilter eq '.' && $ownerfilter eq '.' &&
$typefilter eq '.') {
$unpack = 0;
}
@@ -3494,7 +4304,9 @@ sub dump_course_id_handler {
my $hashref = &tie_domain_hash($udom, "nohist_courseids", &GDBM_WRCREAT());
if ($hashref) {
while (my ($key,$value) = each(%$hashref)) {
- my ($unesc_key,$lasttime_key,$lasttime,$is_hash,%val,%unesc_val);
+ my ($unesc_key,$lasttime_key,$lasttime,$is_hash,%val,
+ %unesc_val,$selfenroll_end,$selfenroll_types,$created,
+ $context);
$unesc_key = &unescape($key);
if ($unesc_key =~ /^lasttime:/) {
next;
@@ -3505,22 +4317,130 @@ sub dump_course_id_handler {
$lasttime = $hashref->{$lasttime_key};
next if ($lasttime<$since);
}
+ my ($canclone,$valchange);
my $items = &Apache::lonnet::thaw_unescape($value);
if (ref($items) eq 'HASH') {
+ if ($hashref->{$lasttime_key} eq '') {
+ next if ($since > 1);
+ }
$is_hash = 1;
+ if ($domcloner) {
+ $canclone = 1;
+ } elsif (defined($clonerudom)) {
+ if ($items->{'cloners'}) {
+ my @cloneable = split(',',$items->{'cloners'});
+ if (@cloneable) {
+ if (grep(/^\*$/,@cloneable)) {
+ $canclone = 1;
+ } elsif (grep(/^\*:\Q$clonerudom\E$/,@cloneable)) {
+ $canclone = 1;
+ } elsif (grep(/^\Q$cloneruname\E:\Q$clonerudom\E$/,@cloneable)) {
+ $canclone = 1;
+ }
+ }
+ unless ($canclone) {
+ if ($cloneruname ne '' && $clonerudom ne '') {
+ if ($cc_clone{$unesc_key}) {
+ $canclone = 1;
+ $items->{'cloners'} .= ','.$cloneruname.':'.
+ $clonerudom;
+ $valchange = 1;
+ }
+ }
+ }
+ } elsif (defined($cloneruname)) {
+ if ($cc_clone{$unesc_key}) {
+ $canclone = 1;
+ $items->{'cloners'} = $cloneruname.':'.$clonerudom;
+ $valchange = 1;
+ }
+ unless ($canclone) {
+ if ($items->{'owner'} =~ /:/) {
+ if ($items->{'owner'} eq $cloner) {
+ $canclone = 1;
+ }
+ } elsif ($cloner eq $items->{'owner'}.':'.$udom) {
+ $canclone = 1;
+ }
+ if ($canclone) {
+ $items->{'cloners'} = $cloneruname.':'.$clonerudom;
+ $valchange = 1;
+ }
+ }
+ }
+ }
if ($unpack || !$rtn_as_hash) {
$unesc_val{'descr'} = $items->{'description'};
$unesc_val{'inst_code'} = $items->{'inst_code'};
$unesc_val{'owner'} = $items->{'owner'};
$unesc_val{'type'} = $items->{'type'};
+ $unesc_val{'cloners'} = $items->{'cloners'};
+ $unesc_val{'created'} = $items->{'created'};
+ $unesc_val{'context'} = $items->{'context'};
+ }
+ $selfenroll_types = $items->{'selfenroll_types'};
+ $selfenroll_end = $items->{'selfenroll_end_date'};
+ $created = $items->{'created'};
+ $context = $items->{'context'};
+ if ($hasuniquecode ne '.') {
+ next unless ($items->{'uniquecode'});
+ }
+ if ($selfenrollonly) {
+ next if (!$selfenroll_types);
+ if (($selfenroll_end > 0) && ($selfenroll_end <= $now)) {
+ next;
+ }
+ }
+ if ($creationcontext ne '.') {
+ next if (($context ne '') && ($context ne $creationcontext));
+ }
+ if ($createdbefore > 0) {
+ next if (($created eq '') || ($created > $createdbefore));
+ }
+ if ($createdafter > 0) {
+ next if (($created eq '') || ($created <= $createdafter));
+ }
+ if ($catfilter ne '') {
+ next if ($items->{'categories'} eq '');
+ my @categories = split('&',$items->{'categories'});
+ next if (@categories == 0);
+ my @subcats = split('&',$catfilter);
+ my $matchcat = 0;
+ foreach my $cat (@categories) {
+ if (grep(/^\Q$cat\E$/,@subcats)) {
+ $matchcat = 1;
+ last;
+ }
+ }
+ next if (!$matchcat);
+ }
+ if ($caller eq 'coursecatalog') {
+ if ($items->{'hidefromcat'} eq 'yes') {
+ next if !$showhidden;
+ }
}
} else {
+ next if ($catfilter ne '');
+ next if ($selfenrollonly);
+ next if ($createdbefore || $createdafter);
+ next if ($creationcontext ne '.');
+ if ((defined($clonerudom)) && (defined($cloneruname))) {
+ if ($cc_clone{$unesc_key}) {
+ $canclone = 1;
+ $val{'cloners'} = &escape($cloneruname.':'.$clonerudom);
+ }
+ }
$is_hash = 0;
my @courseitems = split(/:/,$value);
$lasttime = pop(@courseitems);
- next if ($lasttime<$since);
+ if ($hashref->{$lasttime_key} eq '') {
+ next if ($lasttime<$since);
+ }
($val{'descr'},$val{'inst_code'},$val{'owner'},$val{'type'}) = @courseitems;
}
+ if ($cloneonly) {
+ next unless ($canclone);
+ }
my $match = 1;
if ($description ne '.') {
if (!$is_hash) {
@@ -3534,10 +4454,14 @@ sub dump_course_id_handler {
if (!$is_hash) {
$unesc_val{'inst_code'} = &unescape($val{'inst_code'});
}
- if ($regexp_ok) {
+ if ($regexp_ok == 1) {
if (eval{$unesc_val{'inst_code'} !~ /$instcodefilter/}) {
$match = 0;
}
+ } elsif ($regexp_ok == -1) {
+ if (eval{$unesc_val{'inst_code'} =~ /$instcodefilter/}) {
+ $match = 0;
+ }
} else {
if (eval{$unesc_val{'inst_code'} !~ /\Q$instcodefilter\E/i}) {
$match = 0;
@@ -3603,12 +4527,18 @@ sub dump_course_id_handler {
if ($match == 1) {
if ($rtn_as_hash) {
if ($is_hash) {
- $qresult.=$key.'='.$value.'&';
+ if ($valchange) {
+ my $newvalue = &Apache::lonnet::freeze_escape($items);
+ $qresult.=$key.'='.$newvalue.'&';
+ } else {
+ $qresult.=$key.'='.$value.'&';
+ }
} else {
my %rtnhash = ( 'description' => &unescape($val{'descr'}),
'inst_code' => &unescape($val{'inst_code'}),
'owner' => &unescape($val{'owner'}),
'type' => &unescape($val{'type'}),
+ 'cloners' => &unescape($val{'cloners'}),
);
my $items = &Apache::lonnet::freeze_escape(\%rtnhash);
$qresult.=$key.'='.$items.'&';
@@ -3640,6 +4570,91 @@ sub dump_course_id_handler {
}
®ister_handler("courseiddump", \&dump_course_id_handler, 0, 1, 0);
+sub course_lastaccess_handler {
+ my ($cmd, $tail, $client) = @_;
+ my $userinput = "$cmd:$tail";
+ my ($cdom,$cnum) = split(':',$tail);
+ my (%lastaccess,$qresult);
+ my $hashref = &tie_domain_hash($cdom, "nohist_courseids", &GDBM_WRCREAT());
+ if ($hashref) {
+ while (my ($key,$value) = each(%$hashref)) {
+ my ($unesc_key,$lasttime);
+ $unesc_key = &unescape($key);
+ if ($cnum) {
+ next unless ($unesc_key =~ /\Q$cdom\E_\Q$cnum\E$/);
+ }
+ if ($unesc_key =~ /^lasttime:($LONCAPA::match_domain\_$LONCAPA::match_courseid)/) {
+ $lastaccess{$1} = $value;
+ } else {
+ my $items = &Apache::lonnet::thaw_unescape($value);
+ if (ref($items) eq 'HASH') {
+ unless ($lastaccess{$unesc_key}) {
+ $lastaccess{$unesc_key} = '';
+ }
+ } else {
+ my @courseitems = split(':',$value);
+ $lastaccess{$unesc_key} = pop(@courseitems);
+ }
+ }
+ }
+ foreach my $cid (sort(keys(%lastaccess))) {
+ $qresult.=&escape($cid).'='.$lastaccess{$cid}.'&';
+ }
+ if (&untie_domain_hash($hashref)) {
+ if ($qresult) {
+ chop($qresult);
+ }
+ &Reply($client, \$qresult, $userinput);
+ } else {
+ &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
+ "while attempting lastacourseaccess\n", $userinput);
+ }
+ } else {
+ &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
+ "while attempting lastcourseaccess\n", $userinput);
+ }
+ return 1;
+}
+®ister_handler("courselastaccess",\&course_lastaccess_handler, 0, 1, 0);
+
+sub course_sessions_handler {
+ my ($cmd, $tail, $client) = @_;
+ my $userinput = "$cmd:$tail";
+ my ($cdom,$cnum,$lastactivity) = split(':',$tail);
+ my $dbsuffix = '_'.$cdom.'_'.$cnum.'.db';
+ my (%sessions,$qresult);
+ my $now=time;
+ if (opendir(DIR,$perlvar{'lonIDsDir'})) {
+ my $filename;
+ while ($filename=readdir(DIR)) {
+ next if ($filename=~/^\./);
+ next if ($filename=~/^publicuser_/);
+ next if ($filename=~/^[a-f0-9]+_(linked|lti_\d+)\.id$/);
+ if ($filename =~ /^($LONCAPA::match_username)_\d+_($LONCAPA::match_domain)_/) {
+ my ($uname,$udom) = ($1,$2);
+ next unless (-e "$perlvar{'lonDaemons'}/tmp/$uname$dbsuffix");
+ my $mtime = (stat("$perlvar{'lonIDsDir'}/$filename"))[9];
+ if ($lastactivity < 0) {
+ next if ($mtime-$now > $lastactivity);
+ } else {
+ next if ($now-$mtime > $lastactivity);
+ }
+ $sessions{$uname.':'.$udom} = $mtime;
+ }
+ }
+ closedir(DIR);
+ }
+ foreach my $user (keys(%sessions)) {
+ $qresult.=&escape($user).'='.$sessions{$user}.'&';
+ }
+ if ($qresult) {
+ chop($qresult);
+ }
+ &Reply($client, \$qresult, $userinput);
+ return 1;
+}
+®ister_handler("coursesessions",\&course_sessions_handler, 0, 1, 0);
+
#
# Puts an unencrypted entry in a namespace db file at the domain level
#
@@ -3688,7 +4703,7 @@ sub put_domain_handler {
# domain directory.
#
# Parameters:
-# $cmd - Command request keyword (get).
+# $cmd - Command request keyword (getdom).
# $tail - Tail of the command. This is a colon separated list
# consisting of the domain and the 'namespace'
# which selects the gdbm file to do the lookup in,
@@ -3705,33 +4720,116 @@ sub put_domain_handler {
sub get_domain_handler {
my ($cmd, $tail, $client) = @_;
- my $userinput = "$client:$tail";
+ my $userinput = "$cmd:$tail";
my ($udom,$namespace,$what)=split(/:/,$tail,3);
- chomp($what);
- my @queries=split(/\&/,$what);
- my $qresult='';
- my $hashref = &tie_domain_hash($udom, "$namespace", &GDBM_READER());
- if ($hashref) {
- for (my $i=0;$i<=$#queries;$i++) {
- $qresult.="$hashref->{$queries[$i]}&";
- }
- if (&untie_domain_hash($hashref)) {
- $qresult=~s/\&$//;
- &Reply($client, \$qresult, $userinput);
+ if ($namespace =~ /^enc/) {
+ &Failure( $client, "refused\n", $userinput);
+ } else {
+ my $res = LONCAPA::Lond::get_dom($userinput);
+ if ($res =~ /^error:/) {
+ &Failure($client, \$res, $userinput);
} else {
- &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
- "while attempting getdom\n",$userinput);
+ &Reply($client, \$res, $userinput);
}
- } else {
- &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
- "while attempting getdom\n",$userinput);
}
return 1;
}
®ister_handler("getdom", \&get_domain_handler, 0, 1, 0);
+sub encrypted_get_domain_handler {
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput = "$cmd:$tail";
+
+ my $res = LONCAPA::Lond::get_dom($userinput);
+ if ($res =~ /^error:/) {
+ &Failure($client, \$res, $userinput);
+ } else {
+ if ($cipher) {
+ my $cmdlength=length($res);
+ $res.=" ";
+ my $encres='';
+ for (my $encidx=0;$encidx<=$cmdlength;$encidx+=8) {
+ $encres.= unpack("H16",
+ $cipher->encrypt(substr($res,
+ $encidx,
+ 8)));
+ }
+ &Reply( $client,"enc:$cmdlength:$encres\n",$userinput);
+ } else {
+ &Failure( $client, "error:no_key\n",$userinput);
+ }
+ }
+ return 1;
+}
+®ister_handler("egetdom", \&encrypted_get_domain_handler, 1, 1, 0);
+
+#
+# Encrypted get from the namespace database file at the domain level.
+# This function retrieves a keyed item from a specific named database in the
+# domain directory.
+#
+# Parameters:
+# $cmd - Command request keyword (lti).
+# $tail - Tail of the command. This is a colon-separated list
+# consisting of the domain, coursenum, if for LTI-
+# enabled deep-linking to course content using
+# link protection configured within a course,
+# context (=deeplink) if for LTI-enabled deep-linking
+# to course content using LTI Provider settings
+# configured within a course's domain, the (escaped)
+# launch URL, the (escaped) method (typically POST),
+# and a frozen hash of the LTI launch parameters
+# from the LTI payload.
+# $client - File descriptor open on the client.
+# Returns:
+# 1 - Continue processing.
+# 0 - Exit.
+# Side effects:
+# The reply will contain an LTI itemID, if the signed LTI payload
+# could be verified using the consumer key and the shared secret
+# available for that key (for the itemID) for either the course or domain,
+# depending on values for cnum and context. The reply is encrypted before
+# being written to $client.
+#
+sub lti_handler {
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput = "$cmd:$tail";
+
+ my ($cdom,$cnum,$context,$escurl,$escmethod,$items) = split(/:/,$tail);
+ my $url = &unescape($escurl);
+ my $method = &unescape($escmethod);
+ my $params = &Apache::lonnet::thaw_unescape($items);
+ my $res;
+ if ($cnum ne '') {
+ $res = &LONCAPA::Lond::crslti_itemid($cdom,$cnum,$url,$method,$params,$perlvar{'lonVersion'});
+ } else {
+ $res = &LONCAPA::Lond::domlti_itemid($cdom,$context,$url,$method,$params,$perlvar{'lonVersion'});
+ }
+ if ($res =~ /^error:/) {
+ &Failure($client, \$res, $userinput);
+ } else {
+ if ($cipher) {
+ my $cmdlength=length($res);
+ $res.=" ";
+ my $encres='';
+ for (my $encidx=0;$encidx<=$cmdlength;$encidx+=8) {
+ $encres.= unpack("H16",
+ $cipher->encrypt(substr($res,
+ $encidx,
+ 8)));
+ }
+ &Reply( $client,"enc:$cmdlength:$encres\n",$userinput);
+ } else {
+ &Failure( $client, "error:no_key\n",$userinput);
+ }
+ }
+ return 1;
+}
+®ister_handler("lti", \<i_handler, 1, 1, 0);
#
# Puts an id to a domains id database.
@@ -3830,6 +4928,49 @@ sub get_id_handler {
}
®ister_handler("idget", \&get_id_handler, 0, 1, 0);
+# Deletes one or more ids in a domain's id database.
+#
+# Parameters:
+# $cmd - Command keyword (iddel).
+# $tail - Command tail. In this case a colon
+# separated list containing:
+# The domain for which we are deleting the id(s).
+# &-separated list of id(s) to delete.
+# $client - File open on client socket.
+# Returns:
+# 1 - Continue processing
+# 0 - Exit server.
+#
+#
+
+sub del_id_handler {
+ my ($cmd,$tail,$client) = @_;
+
+ my $userinput = "$cmd:$tail";
+
+ my ($udom,$what)=split(/:/,$tail);
+ chomp($what);
+ my $hashref = &tie_domain_hash($udom, "ids", &GDBM_WRCREAT(),
+ "D", $what);
+ if ($hashref) {
+ my @keys=split(/\&/,$what);
+ foreach my $key (@keys) {
+ delete($hashref->{$key});
+ }
+ if (&untie_user_hash($hashref)) {
+ &Reply($client, "ok\n", $userinput);
+ } else {
+ &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
+ "while attempting iddel\n", $userinput);
+ }
+ } else {
+ &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
+ "while attempting iddel\n", $userinput);
+ }
+ return 1;
+}
+®ister_handler("iddel", \&del_id_handler, 0, 1, 0);
+
#
# Puts broadcast e-mail sent by Domain Coordinator in nohist_dcmail database
#
@@ -3850,7 +4991,8 @@ sub get_id_handler {
sub put_dcmail_handler {
my ($cmd,$tail,$client) = @_;
my $userinput = "$cmd:$tail";
-
+
+
my ($udom,$what)=split(/:/,$tail);
chomp($what);
my $hashref = &tie_domain_hash($udom, "nohist_dcmail", &GDBM_WRCREAT());
@@ -4039,27 +5181,30 @@ sub dump_domainroles_handler {
$rolesfilter=&unescape($rolesfilter);
@roles = split(/\&/,$rolesfilter);
}
-
+
my $hashref = &tie_domain_hash($udom, "nohist_domainroles", &GDBM_WRCREAT());
if ($hashref) {
my $qresult = '';
while (my ($key,$value) = each(%$hashref)) {
my $match = 1;
- my ($start,$end) = split(/:/,&unescape($value));
+ my ($end,$start) = split(/:/,&unescape($value));
my ($trole,$uname,$udom,$runame,$rudom,$rsec) = split(/:/,&unescape($key));
- unless ($startfilter eq '.' || !defined($startfilter)) {
- if ($start >= $startfilter) {
+ unless (@roles < 1) {
+ unless (grep/^\Q$trole\E$/,@roles) {
$match = 0;
+ next;
}
}
- unless ($endfilter eq '.' || !defined($endfilter)) {
- if ($end <= $endfilter) {
+ unless ($startfilter eq '.' || !defined($startfilter)) {
+ if ((defined($start)) && ($start >= $startfilter)) {
$match = 0;
+ next;
}
}
- unless (@roles < 1) {
- unless (grep/^\Q$trole\E$/,@roles) {
+ unless ($endfilter eq '.' || !defined($endfilter)) {
+ if ((defined($end)) && (($end > 0) && ($end <= $endfilter))) {
$match = 0;
+ next;
}
}
if ($match == 1) {
@@ -4111,15 +5256,23 @@ sub tmp_put_handler {
}
my ($id,$store);
$tmpsnum++;
- if ($context eq 'resetpw') {
- $id = &md5_hex(&md5_hex(time.{}.rand().$$));
+ my $numtries = 0;
+ my $execdir=$perlvar{'lonDaemons'};
+ if (($context eq 'resetpw') || ($context eq 'createaccount') ||
+ ($context eq 'sso') || ($context eq 'link') || ($context eq 'retry')) {
+ $id = &md5_hex(&md5_hex(time.{}.rand().$$.$tmpsnum));
+ while ((-e "$execdir/tmp/$id.tmp") && ($numtries <10)) {
+ undef($id);
+ $id = &md5_hex(&md5_hex(time.{}.rand().$$.$tmpsnum));
+ $numtries ++;
+ }
} else {
$id = $$.'_'.$clientip.'_'.$tmpsnum;
}
$id=~s/\W/\_/g;
$record=~s/\n//g;
- my $execdir=$perlvar{'lonDaemons'};
- if ($store=IO::File->new(">$execdir/tmp/$id.tmp")) {
+ if (($id ne '') &&
+ ($store=IO::File->new(">$execdir/tmp/$id.tmp"))) {
print $store $record;
close $store;
&Reply($client, \$id, $userinput);
@@ -4202,6 +5355,116 @@ sub tmp_del_handler {
®ister_handler("tmpdel", \&tmp_del_handler, 0, 1, 0);
#
+# Process the updatebalcookie command. This command updates a
+# cookie in the lonBalancedir directory on a load balancer node.
+#
+# Parameters:
+# $cmd - Command that got us here.
+# $tail - Tail of the request (escaped cookie: escaped current entry)
+#
+# $client - socket open on the client process.
+#
+# Returns:
+# 1 - Indicating processing should continue.
+# Side Effects:
+# A cookie file is updated from the lonBalancedir directory
+# A reply is sent to the client.
+#
+sub update_balcookie_handler {
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput= "$cmd:$tail";
+ chomp($tail);
+ my ($cookie,$lastentry) = map { &unescape($_) } (split(/:/,$tail));
+
+ my $updatedone;
+ if ($cookie =~ /^$LONCAPA::match_domain\_$LONCAPA::match_username\_[a-f0-9]{32}$/) {
+ my $execdir=$perlvar{'lonBalanceDir'};
+ if (-e "$execdir/$cookie.id") {
+ my $doupdate;
+ if (open(my $fh,'<',"$execdir/$cookie.id")) {
+ while (my $line = <$fh>) {
+ chomp($line);
+ if ($line eq $lastentry) {
+ $doupdate = 1;
+ last;
+ }
+ }
+ close($fh);
+ }
+ if ($doupdate) {
+ if (open(my $fh,'>',"$execdir/$cookie.id")) {
+ print $fh $clientname;
+ close($fh);
+ $updatedone = 1;
+ }
+ }
+ }
+ }
+ if ($updatedone) {
+ &Reply($client, "ok\n", $userinput);
+ } else {
+ &Failure( $client, "error: ".($!+0)."file update failed ".
+ "while attempting updatebalcookie\n", $userinput);
+ }
+ return 1;
+}
+®ister_handler("updatebalcookie", \&update_balcookie_handler, 0, 1, 0);
+
+#
+# Process the delbalcookie command. This command deletes a balancer
+# cookie in the lonBalancedir directory on a load balancer node.
+#
+# Parameters:
+# $cmd - Command that got us here.
+# $cookie - Cookie to be deleted.
+# $client - socket open on the client process.
+#
+# Returns:
+# 1 - Indicating processing should continue.
+# Side Effects:
+# A cookie file is deleted from the lonBalancedir directory
+# A reply is sent to the client.
+sub del_balcookie_handler {
+ my ($cmd, $cookie, $client) = @_;
+
+ my $userinput= "$cmd:$cookie";
+
+ chomp($cookie);
+ $cookie = &unescape($cookie);
+ my $deleted = '';
+ if ($cookie =~ /^$LONCAPA::match_domain\_$LONCAPA::match_username\_[a-f0-9]{32}$/) {
+ my $execdir=$perlvar{'lonBalanceDir'};
+ if (-e "$execdir/$cookie.id") {
+ if (open(my $fh,'<',"$execdir/$cookie.id")) {
+ my $dodelete;
+ while (my $line = <$fh>) {
+ chomp($line);
+ if ($line eq $clientname) {
+ $dodelete = 1;
+ last;
+ }
+ }
+ close($fh);
+ if ($dodelete) {
+ if (unlink("$execdir/$cookie.id")) {
+ $deleted = 1;
+ }
+ }
+ }
+ }
+ }
+ if ($deleted) {
+ &Reply($client, "ok\n", $userinput);
+ } else {
+ &Failure( $client, "error: ".($!+0)."Unlinking cookie file Failed ".
+ "while attempting delbalcookie\n", $userinput);
+ }
+ return 1;
+}
+®ister_handler("delbalcookie", \&del_balcookie_handler, 0, 1, 0);
+
+#
# Processes the setannounce command. This command
# creates a file named announce.txt in the top directory of
# the documentn root and sets its contents. The announce.txt file is
@@ -4346,6 +5609,77 @@ sub enrollment_enabled_handler {
}
®ister_handler("autorun", \&enrollment_enabled_handler, 0, 1, 0);
+#
+# Validate an institutional code used for a LON-CAPA course.
+#
+# Formal Parameters:
+# $cmd - The command request that got us dispatched.
+# $tail - The tail of the command. In this case,
+# this is a colon separated set of words that will be split
+# into:
+# $dom - The domain for which the check of
+# institutional course code will occur.
+#
+# $instcode - The institutional code for the course
+# being requested, or validated for rights
+# to request.
+#
+# $owner - The course requestor (who will be the
+# course owner, in the form username:domain
+#
+# $client - Socket open on the client.
+# Returns:
+# 1 - Indicating processing should continue.
+#
+sub validate_instcode_handler {
+ my ($cmd, $tail, $client) = @_;
+ my $userinput = "$cmd:$tail";
+ my ($dom,$instcode,$owner) = split(/:/, $tail);
+ $instcode = &unescape($instcode);
+ $owner = &unescape($owner);
+ my ($outcome,$description,$credits) =
+ &localenroll::validate_instcode($dom,$instcode,$owner);
+ my $result = &escape($outcome).'&'.&escape($description).'&'.
+ &escape($credits);
+ &Reply($client, \$result, $userinput);
+
+ return 1;
+}
+®ister_handler("autovalidateinstcode", \&validate_instcode_handler, 0, 1, 0);
+
+#
+# Validate co-owner for cross-listed institutional code and
+# institutional course code itself used for a LON-CAPA course.
+#
+# Formal Parameters:
+# $cmd - The command request that got us dispatched.
+# $tail - The tail of the command. In this case,
+# this is a colon separated string containing:
+# $dom - Course's LON-CAPA domain
+# $instcode - Institutional course code for the course
+# $inst_xlist - Institutional course Id for the crosslisting
+# $coowner - Username of co-owner
+# (values for all but $dom have been escaped).
+#
+# $client - Socket open on the client.
+# Returns:
+# 1 - Indicating processing should continue.
+#
+sub validate_instcrosslist_handler {
+ my ($cmd, $tail, $client) = @_;
+ my $userinput = "$cmd:$tail";
+ my ($dom,$instcode,$inst_xlist,$coowner) = split(/:/,$tail);
+ $instcode = &unescape($instcode);
+ $inst_xlist = &unescape($inst_xlist);
+ $coowner = &unescape($coowner);
+ my $outcome = &localenroll::validate_crosslist_access($dom,$instcode,
+ $inst_xlist,$coowner);
+ &Reply($client, \$outcome, $userinput);
+
+ return 1;
+}
+®ister_handler("autovalidateinstcrosslist", \&validate_instcrosslist_handler, 0, 1, 0);
+
# Get the official sections for which auto-enrollment is possible.
# Since the admin people won't know about 'unofficial sections'
# we cannot auto-enroll on them.
@@ -4392,10 +5726,11 @@ sub get_sections_handler {
sub validate_course_owner_handler {
my ($cmd, $tail, $client) = @_;
my $userinput = "$cmd:$tail";
- my ($inst_course_id, $owner, $cdom) = split(/:/, $tail);
-
+ my ($inst_course_id, $owner, $cdom, $coowners) = split(/:/, $tail);
+
$owner = &unescape($owner);
- my $outcome = &localenroll::new_course($inst_course_id,$owner,$cdom);
+ $coowners = &unescape($coowners);
+ my $outcome = &localenroll::new_course($inst_course_id,$owner,$cdom,$coowners);
&Reply($client, \$outcome, $userinput);
@@ -4441,9 +5776,10 @@ sub validate_course_section_handler {
# Formal Parameters:
# $cmd - The command request that got us dispatched.
# $tail - The tail of the command. In this case this is a colon separated
-# set of words that will be split into:
+# set of values that will be split into:
# $inst_class - Institutional code for the specific class section
-# $courseowner - The escaped username:domain of the course owner
+# $ownerlist - An escaped comma-separated list of username:domain
+# of the course owner, and co-owner(s).
# $cdom - The domain of the course from the institution's
# point of view.
# $client - The socket open on the client.
@@ -4455,11 +5791,11 @@ sub validate_class_access_handler {
my ($cmd, $tail, $client) = @_;
my $userinput = "$cmd:$tail";
my ($inst_class,$ownerlist,$cdom) = split(/:/, $tail);
- my @owners = split(/,/,&unescape($ownerlist));
+ my $owners = &unescape($ownerlist);
my $outcome;
eval {
local($SIG{__DIE__})='DEFAULT';
- $outcome=&localenroll::check_section($inst_class,\@owners,$cdom);
+ $outcome=&localenroll::check_section($inst_class,$owners,$cdom);
};
&Reply($client,\$outcome, $userinput);
@@ -4468,6 +5804,112 @@ sub validate_class_access_handler {
®ister_handler("autovalidateclass_sec", \&validate_class_access_handler, 0, 1, 0);
#
+# Modify institutional sections (using customized &instsec_reformat()
+# routine in localenroll.pm), to either clutter or declutter, for
+# purposes of ensuring an institutional course section (string) can
+# be unambiguously separated into institutional course and section.
+#
+# Formal Parameters:
+# $cmd - The command request that got us dispatched.
+# $tail - The tail of the command. In this case this is a colon separated
+# set of values that will be split into:
+# $cdom - The LON-CAPA domain of the course.
+# $action - Either: clutter or declutter
+# clutter adds character(s) to eliminate ambiguity
+# declutter removes the added characters (e.g., for
+# display of the institutional course section string.
+# $info - A frozen hash in which keys are:
+# LON-CAPA course number:Institutional course code
+# and values are a reference to an array of the
+# items to modify -- either institutional sections,
+# or institutional course sections (for crosslistings).
+# $client - The socket open on the client.
+# Returns:
+# 1 - continue processing.
+#
+
+sub instsec_reformat_handler {
+ my ($cmd, $tail, $client) = @_;
+ my $userinput = "$cmd:$tail";
+ my ($cdom,$action,$info) = split(/:/,$tail);
+ my $instsecref = &Apache::lonnet::thaw_unescape($info);
+ my ($outcome,$result);
+ eval {
+ local($SIG{__DIE__})='DEFAULT';
+ $outcome=&localenroll::instsec_reformat($cdom,$action,$instsecref);
+ if ($outcome eq 'ok') {
+ if (ref($instsecref) eq 'HASH') {
+ foreach my $key (keys(%{$instsecref})) {
+ $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($instsecref->{$key}).'&';
+ }
+ $result =~ s/\&$//;
+ }
+ }
+ };
+ if (!$@) {
+ if ($outcome eq 'ok') {
+ &Reply( $client, \$result, $userinput);
+ } else {
+ &Reply($client,\$outcome, $userinput);
+ }
+ } else {
+ &Failure($client,"unknown_cmd\n",$userinput);
+ }
+ return 1;
+}
+®ister_handler("autoinstsecreformat",\&instsec_reformat_handler, 0, 1, 0);
+
+#
+# Validate course owner or co-owners(s) access to enrollment data for all sections
+# and crosslistings for a particular course.
+#
+#
+# Formal Parameters:
+# $cmd - The command request that got us dispatched.
+# $tail - The tail of the command. In this case this is a colon separated
+# set of values that will be split into:
+# $ownerlist - An escaped comma-separated list of username:domain
+# of the course owner, and co-owner(s).
+# $cdom - The domain of the course from the institution's
+# point of view.
+# $classes - Frozen hash of institutional course sections and
+# crosslistings.
+# $client - The socket open on the client.
+# Returns:
+# 1 - continue processing.
+#
+
+sub validate_classes_handler {
+ my ($cmd, $tail, $client) = @_;
+ my $userinput = "$cmd:$tail";
+ my ($ownerlist,$cdom,$classes) = split(/:/, $tail);
+ my $classesref = &Apache::lonnet::thaw_unescape($classes);
+ my $owners = &unescape($ownerlist);
+ my $result;
+ eval {
+ local($SIG{__DIE__})='DEFAULT';
+ my %validations;
+ my $response = &localenroll::check_instclasses($owners,$cdom,$classesref,
+ \%validations);
+ if ($response eq 'ok') {
+ foreach my $key (keys(%validations)) {
+ $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($validations{$key}).'&';
+ }
+ $result =~ s/\&$//;
+ } else {
+ $result = 'error';
+ }
+ };
+ if (!$@) {
+ &Reply($client, \$result, $userinput);
+ } else {
+ &Failure($client,"unknown_cmd\n",$userinput);
+ }
+ return 1;
+}
+®ister_handler("autovalidateinstclasses", \&validate_classes_handler, 0, 1, 0);
+
+#
# Create a password for a new LON-CAPA user added by auto-enrollment.
# Only used for case where authentication method for new user is localauth
#
@@ -4502,13 +5944,59 @@ sub create_auto_enroll_password_handler
®ister_handler("autocreatepassword", \&create_auto_enroll_password_handler,
0, 1, 0);
+sub auto_export_grades_handler {
+ my ($cmd, $tail, $client) = @_;
+ my $userinput = "$cmd:$tail";
+ my ($cdom,$cnum,$info,$data) = split(/:/,$tail);
+ my $inforef = &Apache::lonnet::thaw_unescape($info);
+ my $dataref = &Apache::lonnet::thaw_unescape($data);
+ my ($outcome,$result);;
+ eval {
+ local($SIG{__DIE__})='DEFAULT';
+ my %rtnhash;
+ $outcome=&localenroll::export_grades($cdom,$cnum,$inforef,$dataref,\%rtnhash);
+ if ($outcome eq 'ok') {
+ foreach my $key (keys(%rtnhash)) {
+ $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($rtnhash{$key}).'&';
+ }
+ $result =~ s/\&$//;
+ }
+ };
+ if (!$@) {
+ if ($outcome eq 'ok') {
+ if ($cipher) {
+ my $cmdlength=length($result);
+ $result.=" ";
+ my $encresult='';
+ for (my $encidx=0;$encidx<=$cmdlength;$encidx+=8) {
+ $encresult.= unpack("H16",
+ $cipher->encrypt(substr($result,
+ $encidx,
+ 8)));
+ }
+ &Reply( $client, "enc:$cmdlength:$encresult\n", $userinput);
+ } else {
+ &Failure( $client, "error:no_key\n", $userinput);
+ }
+ } else {
+ &Reply($client, "$outcome\n", $userinput);
+ }
+ } else {
+ &Failure($client,"export_error\n",$userinput);
+ }
+ return 1;
+}
+®ister_handler("autoexportgrades", \&auto_export_grades_handler,
+ 1, 1, 0);
+
+
# Retrieve and remove temporary files created by/during autoenrollment.
#
# Formal Parameters:
# $cmd - The command that got us dispatched.
# $tail - The tail of the command. In our case this is a colon
# separated list that will be split into:
-# $filename - The name of the file to remove.
+# $filename - The name of the file to retrieve.
# The filename is given as a path relative to
# the LonCAPA temp file directory.
# $client - Socket open on the client.
@@ -4522,7 +6010,11 @@ sub retrieve_auto_file_handler {
my ($filename) = split(/:/, $tail);
my $source = $perlvar{'lonDaemons'}.'/tmp/'.$filename;
- if ( (-e $source) && ($filename ne '') ) {
+ if ($filename =~m{/\.\./}) {
+ &Failure($client, "refused\n", $userinput);
+ } elsif ($filename !~ /^$LONCAPA::match_domain\_$LONCAPA::match_courseid\_.+_classlist\.xml$/) {
+ &Failure($client, "refused\n", $userinput);
+ } elsif ( (-e $source) && ($filename ne '') ) {
my $reply = '';
if (open(my $fh,$source)) {
while (<$fh>) {
@@ -4549,6 +6041,109 @@ sub retrieve_auto_file_handler {
}
®ister_handler("autoretrieve", \&retrieve_auto_file_handler, 0,1,0);
+sub crsreq_checks_handler {
+ my ($cmd, $tail, $client) = @_;
+ my $userinput = "$cmd:$tail";
+ my $dom = $tail;
+ my $result;
+ my @reqtypes = ('official','unofficial','community','textbook');
+ eval {
+ local($SIG{__DIE__})='DEFAULT';
+ my %validations;
+ my $response = &localenroll::crsreq_checks($dom,\@reqtypes,
+ \%validations);
+ if ($response eq 'ok') {
+ foreach my $key (keys(%validations)) {
+ $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($validations{$key}).'&';
+ }
+ $result =~ s/\&$//;
+ } else {
+ $result = 'error';
+ }
+ };
+ if (!$@) {
+ &Reply($client, \$result, $userinput);
+ } else {
+ &Failure($client,"unknown_cmd\n",$userinput);
+ }
+ return 1;
+}
+®ister_handler("autocrsreqchecks", \&crsreq_checks_handler, 0, 1, 0);
+
+sub validate_crsreq_handler {
+ my ($cmd, $tail, $client) = @_;
+ my $userinput = "$cmd:$tail";
+ my ($dom,$owner,$crstype,$inststatuslist,$instcode,$instseclist,$customdata) = split(/:/, $tail);
+ $instcode = &unescape($instcode);
+ $owner = &unescape($owner);
+ $crstype = &unescape($crstype);
+ $inststatuslist = &unescape($inststatuslist);
+ $instcode = &unescape($instcode);
+ $instseclist = &unescape($instseclist);
+ my $custominfo = &Apache::lonnet::thaw_unescape($customdata);
+ my $outcome;
+ eval {
+ local($SIG{__DIE__})='DEFAULT';
+ $outcome = &localenroll::validate_crsreq($dom,$owner,$crstype,
+ $inststatuslist,$instcode,
+ $instseclist,$custominfo);
+ };
+ if (!$@) {
+ &Reply($client, \$outcome, $userinput);
+ } else {
+ &Failure($client,"unknown_cmd\n",$userinput);
+ }
+ return 1;
+}
+®ister_handler("autocrsreqvalidation", \&validate_crsreq_handler, 0, 1, 0);
+
+sub crsreq_update_handler {
+ my ($cmd, $tail, $client) = @_;
+ my $userinput = "$cmd:$tail";
+ my ($cdom,$cnum,$crstype,$action,$ownername,$ownerdomain,$fullname,$title,$code,
+ $accessstart,$accessend,$infohashref) =
+ split(/:/, $tail);
+ $crstype = &unescape($crstype);
+ $action = &unescape($action);
+ $ownername = &unescape($ownername);
+ $ownerdomain = &unescape($ownerdomain);
+ $fullname = &unescape($fullname);
+ $title = &unescape($title);
+ $code = &unescape($code);
+ $accessstart = &unescape($accessstart);
+ $accessend = &unescape($accessend);
+ my $incoming = &Apache::lonnet::thaw_unescape($infohashref);
+ my ($result,$outcome);
+ eval {
+ local($SIG{__DIE__})='DEFAULT';
+ my %rtnhash;
+ $outcome = &localenroll::crsreq_updates($cdom,$cnum,$crstype,$action,
+ $ownername,$ownerdomain,$fullname,
+ $title,$code,$accessstart,$accessend,
+ $incoming,\%rtnhash);
+ if ($outcome eq 'ok') {
+ my @posskeys = qw(createdweb createdmsg createdcustomized createdactions queuedweb queuedmsg formitems reviewweb validationjs onload javascript);
+ foreach my $key (keys(%rtnhash)) {
+ if (grep(/^\Q$key\E/,@posskeys)) {
+ $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($rtnhash{$key}).'&';
+ }
+ }
+ $result =~ s/\&$//;
+ }
+ };
+ if (!$@) {
+ if ($outcome eq 'ok') {
+ &Reply($client, \$result, $userinput);
+ } else {
+ &Reply($client, "format_error\n", $userinput);
+ }
+ } else {
+ &Failure($client,"unknown_cmd\n",$userinput);
+ }
+ return 1;
+}
+®ister_handler("autocrsrequpdate", \&crsreq_update_handler, 0, 1, 0);
+
#
# Read and retrieve institutional code format (for support form).
# Formal Parameters:
@@ -4633,6 +6228,39 @@ sub get_institutional_defaults_handler {
®ister_handler("autoinstcodedefaults",
\&get_institutional_defaults_handler,0,1,0);
+sub get_possible_instcodes_handler {
+ my ($cmd, $tail, $client) = @_;
+ my $userinput = "$cmd:$tail";
+
+ my $reply;
+ my $cdom = $tail;
+ my (@codetitles,%cat_titles,%cat_order,@code_order);
+ my $formatreply = &localenroll::possible_instcodes($cdom,
+ \@codetitles,
+ \%cat_titles,
+ \%cat_order,
+ \@code_order);
+ if ($formatreply eq 'ok') {
+ my $result = join('&',map {&escape($_);} (@codetitles)).':';
+ $result .= join('&',map {&escape($_);} (@code_order)).':';
+ foreach my $key (keys(%cat_titles)) {
+ $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($cat_titles{$key}).'&';
+ }
+ $result =~ s/\&$//;
+ $result .= ':';
+ foreach my $key (keys(%cat_order)) {
+ $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($cat_order{$key}).'&';
+ }
+ $result =~ s/\&$//;
+ &Reply($client,\$result,$userinput);
+ } else {
+ &Reply($client, "format_error\n", $userinput);
+ }
+ return 1;
+}
+®ister_handler("autopossibleinstcodes",
+ \&get_possible_instcodes_handler,0,1,0);
+
sub get_institutional_user_rules {
my ($cmd, $tail, $client) = @_;
my $userinput = "$cmd:$tail";
@@ -4701,6 +6329,40 @@ sub get_institutional_id_rules {
}
®ister_handler("instidrules",\&get_institutional_id_rules,0,1,0);
+sub get_institutional_selfcreate_rules {
+ my ($cmd, $tail, $client) = @_;
+ my $userinput = "$cmd:$tail";
+ my $dom = &unescape($tail);
+ my (%rules_hash,@rules_order);
+ my $outcome;
+ eval {
+ local($SIG{__DIE__})='DEFAULT';
+ $outcome = &localenroll::selfcreate_rules($dom,\%rules_hash,\@rules_order);
+ };
+ if (!$@) {
+ if ($outcome eq 'ok') {
+ my $result;
+ foreach my $key (keys(%rules_hash)) {
+ $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($rules_hash{$key}).'&';
+ }
+ $result =~ s/\&$//;
+ $result .= ':';
+ if (@rules_order > 0) {
+ foreach my $item (@rules_order) {
+ $result .= &escape($item).'&';
+ }
+ }
+ $result =~ s/\&$//;
+ &Reply($client,\$result,$userinput);
+ } else {
+ &Reply($client,"error\n", $userinput);
+ }
+ } else {
+ &Failure($client,"unknown_cmd\n",$userinput);
+ }
+}
+®ister_handler("instemailrules",\&get_institutional_selfcreate_rules,0,1,0);
+
sub institutional_username_check {
my ($cmd, $tail, $client) = @_;
@@ -4760,6 +6422,35 @@ sub institutional_id_check {
}
®ister_handler("instidrulecheck",\&institutional_id_check,0,1,0);
+sub institutional_selfcreate_check {
+ my ($cmd, $tail, $client) = @_;
+ my $userinput = "$cmd:$tail";
+ my %rulecheck;
+ my $outcome;
+ my ($udom,$email,@rules) = split(/:/,$tail);
+ $udom = &unescape($udom);
+ $email = &unescape($email);
+ @rules = map {&unescape($_);} (@rules);
+ eval {
+ local($SIG{__DIE__})='DEFAULT';
+ $outcome = &localenroll::selfcreate_check($udom,$email,\@rules,\%rulecheck);
+ };
+ if (!$@) {
+ if ($outcome eq 'ok') {
+ my $result='';
+ foreach my $key (keys(%rulecheck)) {
+ $result.=&escape($key).'='.&Apache::lonnet::freeze_escape($rulecheck{$key}).'&';
+ }
+ &Reply($client,\$result,$userinput);
+ } else {
+ &Reply($client,"error\n", $userinput);
+ }
+ } else {
+ &Failure($client,"unknown_cmd\n",$userinput);
+ }
+}
+®ister_handler("instselfcreatecheck",\&institutional_selfcreate_check,0,1,0);
+
# Get domain specific conditions for import of student photographs to a course
#
# Retrieves information from photo_permission subroutine in localenroll.
@@ -5160,18 +6851,6 @@ sub lcpasswdstrerror {
}
}
-#
-# Convert an error return code from lcuseradd to a string value:
-#
-sub lcuseraddstrerror {
- my $ErrorCode = shift;
- if(($ErrorCode < 0) || ($ErrorCode > $lastadderror)) {
- return "lcuseradd - Unrecognized error code: ".$ErrorCode;
- } else {
- return $adderrors[$ErrorCode];
- }
-}
-
# grabs exception and records it to log before exiting
sub catchexception {
my ($error)=@_;
@@ -5208,8 +6887,8 @@ my $wwwid=getpwnam('www');
if ($wwwid!=$<) {
my $emailto="$perlvar{'lonAdmEMail'},$perlvar{'lonSysEMail'}";
my $subj="LON: $currenthostid User ID mismatch";
- system("echo 'User ID mismatch. lond must be run as user www.' |\
- mailto $emailto -s '$subj' > /dev/null");
+ system("echo 'User ID mismatch. lond must be run as user www.' |".
+ " mail -s '$subj' $emailto > /dev/null");
exit 1;
}
@@ -5232,7 +6911,7 @@ if (-e $pidfile) {
$server = IO::Socket::INET->new(LocalPort => $perlvar{'londPort'},
Type => SOCK_STREAM,
Proto => 'tcp',
- Reuse => 1,
+ ReuseAddr => 1,
Listen => 10 )
or die "making socket: $@\n";
@@ -5295,9 +6974,13 @@ sub HUPSMAN { # sig
# a setuid perl script that can be root for us to do this job.
#
sub ReloadApache {
- my $execdir = $perlvar{'lonDaemons'};
- my $script = $execdir."/apachereload";
- system($script);
+# --------------------------- Handle case of another apachereload process (locking)
+ if (&LONCAPA::try_to_lock('/tmp/lock_apachereload')) {
+ my $execdir = $perlvar{'lonDaemons'};
+ my $script = $execdir."/apachereload";
+ system($script);
+ unlink('/tmp/lock_apachereload'); # Remove the lock file.
+ }
}
#
@@ -5470,7 +7153,7 @@ sub logstatus {
sub initnewstatus {
my $docdir=$perlvar{'lonDocRoot'};
my $fh=IO::File->new(">$docdir/lon-status/londstatus.txt");
- my $now=time;
+ my $now=time();
my $local=localtime($now);
print $fh "LOND status $local - parent $$\n\n";
opendir(DIR,"$docdir/lon-status/londchld");
@@ -5559,8 +7242,16 @@ $SIG{USR2} = \&UpdateHosts;
# Read the host hashes:
&Apache::lonnet::load_hosts_tab();
+my %iphost = &Apache::lonnet::get_iphost(1);
+
+$dist=`$perlvar{'lonDaemons'}/distprobe`;
-my $dist=`$perlvar{'lonDaemons'}/distprobe`;
+my $arch = `uname -i`;
+chomp($arch);
+if ($arch eq 'unknown') {
+ $arch = `uname -m`;
+ chomp($arch);
+}
# --------------------------------------------------------------
# Accept connections. When a connection comes in, it is validated
@@ -5619,6 +7310,7 @@ sub make_new_child {
or die "Can't unblock SIGINT for fork: $!\n";
$children{$pid} = $clientip;
&status('Started child '.$pid);
+ close($client);
return;
} else {
# Child can *not* return from this subroutine.
@@ -5627,6 +7319,13 @@ sub make_new_child {
#don't get intercepted
$SIG{USR1}= \&logstatus;
$SIG{ALRM}= \&timeout;
+ #
+ # Block sigpipe as it gets thrownon socket disconnect and we want to
+ # deal with that as a read faiure instead.
+ #
+ my $blockset = POSIX::SigSet->new(SIGPIPE);
+ sigprocmask(SIG_BLOCK, $blockset);
+
$lastlog='Forked ';
$status='Forked';
@@ -5637,10 +7336,28 @@ sub make_new_child {
# my $tmpsnum=0; # Now global
#---------------------------------------------------- kerberos 5 initialization
&Authen::Krb5::init_context();
- unless (($dist eq 'fedora5') || ($dist eq 'fedora4') ||
- ($dist eq 'fedora6') || ($dist eq 'suse9.3')) {
- &Authen::Krb5::init_ets();
- }
+
+ my $no_ets;
+ if ($dist =~ /^(?:centos|rhes|scientific|oracle|rocky|alma)(\d+)/) {
+ if ($1 >= 7) {
+ $no_ets = 1;
+ }
+ } elsif ($dist =~ /^suse(\d+\.\d+)$/) {
+ if (($1 eq '9.3') || ($1 >= 12.2)) {
+ $no_ets = 1;
+ }
+ } elsif ($dist =~ /^sles(\d+)$/) {
+ if ($1 > 11) {
+ $no_ets = 1;
+ }
+ } elsif ($dist =~ /^fedora(\d+)$/) {
+ if ($1 < 7) {
+ $no_ets = 1;
+ }
+ }
+ unless ($no_ets) {
+ &Authen::Krb5::init_ets();
+ }
&status('Accepted connection');
# =============================================================================
@@ -5652,10 +7369,10 @@ sub make_new_child {
if ($clientip eq '127.0.0.1') {
$outsideip=&Apache::lonnet::get_host_ip($perlvar{'lonHostID'});
}
-
+ &ReadManagerTable();
my $clientrec=defined(&Apache::lonnet::get_hosts_from_ip($outsideip));
my $ismanager=($managers{$outsideip} ne undef);
- $clientname = "[unknonwn]";
+ $clientname = "[unknown]";
if($clientrec) { # Establish client type.
$ConnectionType = "client";
$clientname = (&Apache::lonnet::get_hosts_from_ip($outsideip))[-1];
@@ -5683,7 +7400,13 @@ sub make_new_child {
#
# If the remote is attempting a local init... give that a try:
#
- my ($i, $inittype) = split(/:/, $remotereq);
+ (my $i, my $inittype, $clientversion) = split(/:/, $remotereq);
+ # For LON-CAPA 2.9, the client session will have sent its LON-CAPA
+ # version when initiating the connection. For LON-CAPA 2.8 and older,
+ # the version is retrieved from the global %loncaparevs in lonnet.pm.
+ # $clientversion contains path to keyfile if $inittype eq 'local'
+ # it's overridden below in this case
+ $clientversion ||= $Apache::lonnet::loncaparevs{$clientname};
# If the connection type is ssl, but I didn't get my
# certificate files yet, then I'll drop back to
@@ -5703,6 +7426,7 @@ sub make_new_child {
}
if($inittype eq "local") {
+ $clientversion = $perlvar{'lonVersion'};
my $key = LocalConnection($client, $remotereq);
if($key) {
Debug("Got local key $key");
@@ -5710,7 +7434,7 @@ sub make_new_child {
my $cipherkey = pack("H32", $key);
$cipher = new IDEA($cipherkey);
print $client "ok:local\n";
- &logthis(''
. "Successful local authentication ");
$keymode = "local"
} else {
@@ -5747,7 +7471,6 @@ sub make_new_child {
."Attempted insecure connection disallowed ");
close $client;
$clientok = 0;
-
}
}
} else {
@@ -5756,7 +7479,6 @@ sub make_new_child {
."$clientip failed to initialize: >$remotereq< ");
&status('No init '.$clientip);
}
-
} else {
&logthis(
"WARNING: Unknown client $clientip");
@@ -5774,12 +7496,15 @@ sub make_new_child {
# ------------------------------------------------------------ Process requests
my $keep_going = 1;
my $user_input;
+ my $clienthost = &Apache::lonnet::hostname($clientname);
+ my $clientserverhomeID = &Apache::lonnet::get_server_homeID($clienthost);
+ $clienthomedom = &Apache::lonnet::host_domain($clientserverhomeID);
while(($user_input = get_request) && $keep_going) {
alarm(120);
Debug("Main: Got $user_input\n");
$keep_going = &process_request($user_input);
alarm(0);
- &status('Listening to '.$clientname." ($keymode)");
+ &status('Listening to '.$clientname." ($keymode)");
}
# --------------------------------------------- client unknown or fishy, refuse
@@ -5795,8 +7520,8 @@ sub make_new_child {
&logthis("CRITICAL: "
."Disconnect from $clientip ($clientname)");
-
-
+
+
# this exit is VERY important, otherwise the child will become
# a producer of more and more children, forking yourself into
# process death.
@@ -5823,22 +7548,29 @@ sub is_author {
# Author role should show up as a key /domain/_au
- my $key = "/$domain/_au";
my $value;
- if (defined($hashref)) {
- $value = $hashref->{$key};
- }
+ if ($hashref) {
- if(defined($value)) {
- &Debug("$user @ $domain is an author");
+ my $key = "/$domain/_au";
+ if (defined($hashref)) {
+ $value = $hashref->{$key};
+ if(!untie_user_hash($hashref)) {
+ return 'error: ' . ($!+0)." untie (GDBM) Failed";
+ }
+ }
+
+ if(defined($value)) {
+ &Debug("$user @ $domain is an author");
+ }
+ } else {
+ return 'error: '.($!+0)." tie (GDBM) Failed";
}
return defined($value);
}
#
# Checks to see if the input roleput request was to set
-# an author role. If so, invokes the lchtmldir script to set
-# up a correct public_html
+# an author role. If so, creates construction space
# Parameters:
# request - The request sent to the rolesput subchunk.
# We're looking for /domain/_au
@@ -5848,16 +7580,15 @@ sub is_author {
#
sub manage_permissions {
my ($request, $domain, $user, $authtype) = @_;
-
- &Debug("manage_permissions: $request $domain $user $authtype");
-
# See if the request is of the form /$domain/_au
if($request =~ /^(\/\Q$domain\E\/_au)$/) { # It's an author rolesput...
- my $execdir = $perlvar{'lonDaemons'};
- my $userhome= "/home/$user" ;
- &logthis("system $execdir/lchtmldir $userhome $user $authtype");
- &Debug("Setting homedir permissions for $userhome");
- system("$execdir/lchtmldir $userhome $user $authtype");
+ my $path=$perlvar{'lonDocRoot'}."/priv/$domain";
+ unless (-e $path) {
+ mkdir($path);
+ }
+ unless (-e $path.'/'.$user) {
+ mkdir($path.'/'.$user);
+ }
}
}
@@ -5905,15 +7636,25 @@ sub password_filename {
# domain - domain of the user.
# name - User's name.
# contents - New contents of the file.
+# saveold - (optional). If true save old file in a passwd.bak file.
# Returns:
# 0 - Failed.
# 1 - Success.
#
sub rewrite_password_file {
- my ($domain, $user, $contents) = @_;
+ my ($domain, $user, $contents, $saveold) = @_;
my $file = &password_filename($domain, $user);
if (defined $file) {
+ if ($saveold) {
+ my $bakfile = $file.'.bak';
+ if (CopyFile($file,$bakfile)) {
+ chmod(0400,$bakfile);
+ &logthis("Old password saved in passwd.bak for internally authenticated user: $user:$domain");
+ } else {
+ &logthis("Failed to save old password in passwd.bak for internally authenticated user: $user:$domain");
+ }
+ }
my $pf = IO::File->new(">$file");
if($pf) {
print $pf "$contents\n";
@@ -5932,9 +7673,7 @@ sub rewrite_password_file {
# Returns the authorization type or nouser if there is no such user.
#
-sub get_auth_type
-{
-
+sub get_auth_type {
my ($domain, $user) = @_;
Debug("get_auth_type( $domain, $user ) \n");
@@ -5970,8 +7709,7 @@ sub get_auth_type
# 0 - The domain,user,password triplet is not a valid user.
#
sub validate_user {
- my ($domain, $user, $password) = @_;
-
+ my ($domain, $user, $password, $checkdefauth) = @_;
# Why negative ~pi you may well ask? Well this function is about
# authentication, and therefore very important to get right.
@@ -5994,10 +7732,41 @@ sub validate_user {
my $null = pack("C",0); # Used by kerberos auth types.
+ if ($howpwd eq 'nouser') {
+ if ($checkdefauth) {
+ my %domdefaults = &Apache::lonnet::get_domain_defaults($domain);
+ if ($domdefaults{'auth_def'} eq 'localauth') {
+ $howpwd = $domdefaults{'auth_def'};
+ $contentpwd = $domdefaults{'auth_arg_def'};
+ } elsif ((($domdefaults{'auth_def'} eq 'krb4') ||
+ ($domdefaults{'auth_def'} eq 'krb5')) &&
+ ($domdefaults{'auth_arg_def'} ne '')) {
+ $howpwd = $domdefaults{'auth_def'};
+ $contentpwd = $domdefaults{'auth_arg_def'};
+ }
+ }
+ }
if ($howpwd ne 'nouser') {
-
if($howpwd eq "internal") { # Encrypted is in local password file.
- $validated = (crypt($password, $contentpwd) eq $contentpwd);
+ if (length($contentpwd) == 13) {
+ $validated = (crypt($password,$contentpwd) eq $contentpwd);
+ if ($validated) {
+ my %domdefaults = &Apache::lonnet::get_domain_defaults($domain);
+ if ($domdefaults{'intauth_switch'}) {
+ my $ncpass = &hash_passwd($domain,$password);
+ my $saveold;
+ if ($domdefaults{'intauth_switch'} == 2) {
+ $saveold = 1;
+ }
+ if (&rewrite_password_file($domain,$user,"$howpwd:$ncpass",$saveold)) {
+ &update_passwd_history($user,$domain,$howpwd,'conversion');
+ &logthis("Validated password hashed with bcrypt for $user:$domain");
+ }
+ }
+ }
+ } else {
+ $validated = &check_internal_passwd($password,$contentpwd,$domain,$user);
+ }
}
elsif ($howpwd eq "unix") { # User is a normal unix user.
$contentpwd = (getpwnam($user))[1];
@@ -6017,47 +7786,24 @@ sub validate_user {
} else {
$validated = 0;
}
- }
- elsif ($howpwd eq "krb4") { # user is in kerberos 4 auth. domain.
- if(! ($password =~ /$null/) ) {
- my $k4error = &Authen::Krb4::get_pw_in_tkt($user,
- "",
- $contentpwd,,
- 'krbtgt',
- $contentpwd,
- 1,
- $password);
- if(!$k4error) {
- $validated = 1;
- } else {
- $validated = 0;
- &logthis('krb4: '.$user.', '.$contentpwd.', '.
- &Authen::Krb4::get_err_txt($Authen::Krb4::error));
- }
- } else {
- $validated = 0; # Password has a match with null.
- }
+ } elsif ($howpwd eq "krb4") { # user is in kerberos 4 auth. domain.
+ my $checkwithkrb5 = 0;
+ if ($dist =~/^fedora(\d+)$/) {
+ if ($1 > 11) {
+ $checkwithkrb5 = 1;
+ }
+ } elsif ($dist =~ /^suse([\d.]+)$/) {
+ if ($1 > 11.1) {
+ $checkwithkrb5 = 1;
+ }
+ }
+ if ($checkwithkrb5) {
+ $validated = &krb5_authen($password,$null,$user,$contentpwd);
+ } else {
+ $validated = &krb4_authen($password,$null,$user,$contentpwd);
+ }
} elsif ($howpwd eq "krb5") { # User is in kerberos 5 auth. domain.
- if(!($password =~ /$null/)) { # Null password not allowed.
- my $krbclient = &Authen::Krb5::parse_name($user.'@'
- .$contentpwd);
- my $krbservice = "krbtgt/".$contentpwd."\@".$contentpwd;
- my $krbserver = &Authen::Krb5::parse_name($krbservice);
- my $credentials= &Authen::Krb5::cc_default();
- $credentials->initialize(&Authen::Krb5::parse_name($user.'@'
- .$contentpwd));
- my $krbreturn = &Authen::Krb5::get_in_tkt_with_password($krbclient,
- $krbserver,
- $password,
- $credentials);
- $validated = ($krbreturn == 1);
- if (!$validated) {
- &logthis('krb5: '.$user.', '.$contentpwd.', '.
- &Authen::Krb5::error());
- }
- } else {
- $validated = 0;
- }
+ $validated = &krb5_authen($password,$null,$user,$contentpwd);
} elsif ($howpwd eq "localauth") {
# Authenticate via installation specific authentcation method:
$validated = &localauth::localauth($user,
@@ -6088,6 +7834,109 @@ sub validate_user {
return $validated;
}
+sub check_internal_passwd {
+ my ($plainpass,$stored,$domain,$user) = @_;
+ my (undef,$method,@rest) = split(/!/,$stored);
+ if ($method eq 'bcrypt') {
+ my $result = &hash_passwd($domain,$plainpass,@rest);
+ if ($result ne $stored) {
+ return 0;
+ }
+ my %domdefaults = &Apache::lonnet::get_domain_defaults($domain);
+ if ($domdefaults{'intauth_check'}) {
+ # Upgrade to a larger number of rounds if necessary
+ my $defaultcost = $domdefaults{'intauth_cost'};
+ if (($defaultcost eq '') || ($defaultcost =~ /D/)) {
+ $defaultcost = 10;
+ }
+ if (int($rest[0])initialize(&Authen::Krb5::parse_name($user.'@'
+ .$contentpwd));
+ my $krbreturn;
+ if (exists(&Authen::Krb5::get_init_creds_password)) {
+ $krbreturn =
+ &Authen::Krb5::get_init_creds_password($krbclient,$password,
+ $krbservice);
+ $validated = (ref($krbreturn) eq 'Authen::Krb5::Creds');
+ } else {
+ $krbreturn =
+ &Authen::Krb5::get_in_tkt_with_password($krbclient,$krbserver,
+ $password,$credentials);
+ $validated = ($krbreturn == 1);
+ }
+ if (!$validated) {
+ &logthis('krb5: '.$user.', '.$contentpwd.', '.
+ &Authen::Krb5::error());
+ }
+ }
+ return $validated;
+}
sub addline {
my ($fname,$hostid,$ip,$newline)=@_;
@@ -6300,7 +8149,9 @@ sub subscribe {
# the metadata
unless ($fname=~/\.meta$/) { &unsub("$fname.meta",$clientip); }
$fname=~s/\/home\/httpd\/html\/res/raw/;
- $fname="http://".&Apache::lonnet::hostname($perlvar{'lonHostID'})."/".$fname;
+ my $protocol = $Apache::lonnet::protocol{$perlvar{'lonHostID'}};
+ $protocol = 'http' if ($protocol ne 'https');
+ $fname=$protocol.'://'.&Apache::lonnet::hostname($perlvar{'lonHostID'})."/".$fname;
$result="$fname\n";
}
} else {
@@ -6342,26 +8193,26 @@ sub change_unix_password {
sub make_passwd_file {
- my ($uname, $umode,$npass,$passfilename)=@_;
+ my ($uname,$udom,$umode,$npass,$passfilename,$action)=@_;
my $result="ok";
if ($umode eq 'krb4' or $umode eq 'krb5') {
{
my $pf = IO::File->new(">$passfilename");
if ($pf) {
print $pf "$umode:$npass\n";
+ &update_passwd_history($uname,$udom,$umode,$action);
} else {
$result = "pass_file_failed_error";
}
}
} elsif ($umode eq 'internal') {
- my $salt=time;
- $salt=substr($salt,6,2);
- my $ncpass=crypt($npass,$salt);
+ my $ncpass = &hash_passwd($udom,$npass);
{
&Debug("Creating internal auth");
my $pf = IO::File->new(">$passfilename");
if($pf) {
print $pf "internal:$ncpass\n";
+ &update_passwd_history($uname,$udom,$umode,$action);
} else {
$result = "pass_file_failed_error";
}
@@ -6371,60 +8222,14 @@ sub make_passwd_file {
my $pf = IO::File->new(">$passfilename");
if($pf) {
print $pf "localauth:$npass\n";
+ &update_passwd_history($uname,$udom,$umode,$action);
} else {
$result = "pass_file_failed_error";
}
}
} elsif ($umode eq 'unix') {
- {
- #
- # Don't allow the creation of privileged accounts!!! that would
- # be real bad!!!
- #
- my $uid = getpwnam($uname);
- if((defined $uid) && ($uid == 0)) {
- &logthis(">>>Attempted to create privilged account blocked");
- return "no_priv_account_error\n";
- }
-
- my $execpath ="$perlvar{'lonDaemons'}/"."lcuseradd";
-
- my $lc_error_file = $execdir."/tmp/lcuseradd".$$.".status";
- {
- &Debug("Executing external: ".$execpath);
- &Debug("user = ".$uname.", Password =". $npass);
- my $se = IO::File->new("|$execpath > $perlvar{'lonDaemons'}/logs/lcuseradd.log");
- print $se "$uname\n";
- print $se "$npass\n";
- print $se "$npass\n";
- print $se "$lc_error_file\n"; # Status -> unique file.
- }
- if (-r $lc_error_file) {
- &Debug("Opening error file: $lc_error_file");
- my $error = IO::File->new("< $lc_error_file");
- my $useraddok = <$error>;
- $error->close;
- unlink($lc_error_file);
-
- chomp $useraddok;
-
- if($useraddok > 0) {
- my $error_text = &lcuseraddstrerror($useraddok);
- &logthis("Failed lcuseradd: $error_text");
- $result = "lcuseradd_failed:$error_text";
- } else {
- my $pf = IO::File->new(">$passfilename");
- if($pf) {
- print $pf "unix:\n";
- } else {
- $result = "pass_file_failed_error";
- }
- }
- } else {
- &Debug("Could not locate lcuseradd error: $lc_error_file");
- $result="bug_lcuseradd_no_output_file";
- }
- }
+ &logthis(">>>Attempt to create unix account blocked -- unix auth not available for new users.");
+ $result="no_new_unix_accounts";
} elsif ($umode eq 'none') {
{
my $pf = IO::File->new("> $passfilename");
@@ -6458,7 +8263,7 @@ sub sethost {
eq &Apache::lonnet::get_host_ip($hostid)) {
$currenthostid =$hostid;
$currentdomainid=&Apache::lonnet::host_domain($hostid);
- &logthis("Setting hostid to $hostid, and domain to $currentdomainid");
+# &logthis("Setting hostid to $hostid, and domain to $currentdomainid");
} else {
&logthis("Requested host id $hostid not an alias of ".
$perlvar{'lonHostID'}." refusing connection");
@@ -6473,6 +8278,37 @@ sub version {
return "version:$VERSION";
}
+sub get_usersession_config {
+ my ($dom,$name) = @_;
+ my ($usersessionconf,$cached)=&Apache::lonnet::is_cached_new($name,$dom);
+ if (defined($cached)) {
+ return $usersessionconf;
+ } else {
+ my %domconfig = &Apache::lonnet::get_dom('configuration',['usersessions'],$dom);
+ if (ref($domconfig{'usersessions'}) eq 'HASH') {
+ &Apache::lonnet::do_cache_new($name,$dom,$domconfig{'usersessions'},3600);
+ return $domconfig{'usersessions'};
+ }
+ }
+ return;
+}
+
+sub get_usersearch_config {
+ my ($dom,$name) = @_;
+ my ($usersearchconf,$cached)=&Apache::lonnet::is_cached_new($name,$dom);
+ if (defined($cached)) {
+ return $usersearchconf;
+ } else {
+ my %domconfig = &Apache::lonnet::get_dom('configuration',['directorysrch'],$dom);
+ &Apache::lonnet::do_cache_new($name,$dom,$domconfig{'directorysrch'},3600);
+ return $domconfig{'directorysrch'};
+ }
+ return;
+}
+
+sub distro_and_arch {
+ return $dist.':'.$arch;
+}
# ----------------------------------- POD (plain old documentation, CPAN style)
@@ -6681,7 +8517,7 @@ Place in B
stores hash in namespace
-=item rolesputy
+=item rolesput
put a role into a user's environment
@@ -6807,3 +8643,408 @@ linux
Server/Process
=cut
+
+
+=pod
+
+=head1 LOG MESSAGES
+
+The messages below can be emitted in the lond log. This log is located
+in ~httpd/perl/logs/lond.log Many log messages have HTML encapsulation
+to provide coloring if examined from inside a web page. Some do not.
+Where color is used, the colors are; Red for sometihhng to get excited
+about and to follow up on. Yellow for something to keep an eye on to
+be sure it does not get worse, Green,and Blue for informational items.
+
+In the discussions below, sometimes reference is made to ~httpd
+when describing file locations. There isn't really an httpd
+user, however there is an httpd directory that gets installed in the
+place that user home directories go. On linux, this is usually
+(always?) /home/httpd.
+
+
+Some messages are colorless. These are usually (not always)
+Green/Blue color level messages.
+
+=over 2
+
+=item (Red) LocalConnection rejecting non local: ne 127.0.0.1
+
+A local connection negotiation was attempted by
+a host whose IP address was not 127.0.0.1.
+The socket is closed and the child will exit.
+lond has three ways to establish an encyrption
+key with a client:
+
+=over 2
+
+=item local
+
+The key is written and read from a file.
+This is only valid for connections from localhost.
+
+=item insecure
+
+The key is generated by the server and
+transmitted to the client.
+
+=item ssl (secure)
+
+An ssl connection is negotiated with the client,
+the key is generated by the server and sent to the
+client across this ssl connection before the
+ssl connectionis terminated and clear text
+transmission resumes.
+
+=back
+
+=item (Red) LocalConnection: caller is insane! init = and type =
+
+The client is local but has not sent an initialization
+string that is the literal "init:local" The connection
+is closed and the child exits.
+
+=item Red CRITICAL Can't get key file
+
+SSL key negotiation is being attempted but the call to
+lonssl::KeyFile failed. This usually means that the
+configuration file is not correctly defining or protecting
+the directories/files lonCertificateDirectory or
+lonnetPrivateKey
+ is a string that describes the reason that
+the key file could not be located.
+
+=item (Red) CRITICAL Can't get certificates
+
+SSL key negotiation failed because we were not able to retrives our certificate
+or the CA's certificate in the call to lonssl::CertificateFile
+ is the textual reason this failed. Usual reasons:
+
+=over 2
+
+=item Apache config file for loncapa incorrect:
+
+one of the variables
+lonCertificateDirectory, lonnetCertificateAuthority, or lonnetCertificate
+undefined or incorrect
+
+=item Permission error:
+
+The directory pointed to by lonCertificateDirectory is not readable by lond
+
+=item Permission error:
+
+Files in the directory pointed to by lonCertificateDirectory are not readable by lond.
+
+=item Installation error:
+
+Either the certificate authority file or the certificate have not
+been installed in lonCertificateDirectory.
+
+=item (Red) CRITICAL SSL Socket promotion failed:
+
+The promotion of the connection from plaintext to SSL failed
+ is the reason for the failure. There are two
+system calls involved in the promotion (one of which failed),
+a dup to produce
+a second fd on the raw socket over which the encrypted data
+will flow and IO::SOcket::SSL->new_from_fd which creates
+the SSL connection on the duped fd.
+
+=item (Blue) WARNING client did not respond to challenge
+
+This occurs on an insecure (non SSL) connection negotiation request.
+lond generates some number from the time, the PID and sends it to
+the client. The client must respond by echoing this information back.
+If the client does not do so, that's a violation of the challenge
+protocols and the connection will be failed.
+
+=item (Red) No manager table. Nobody can manage!!
+
+lond has the concept of privileged hosts that
+can perform remote management function such
+as update the hosts.tab. The manager hosts
+are described in the
+~httpd/lonTabs/managers.tab file.
+this message is logged if this file is missing.
+
+
+=item (Green) Registering manager as with
+
+Reports the successful parse and registration
+of a specific manager.
+
+=item Green existing host
+
+The manager host is already defined in the hosts.tab
+the information in that table, rather than the info in the
+manager table will be used to determine the manager's ip.
+
+=item (Red) Unable to craete
+
+lond has been asked to create new versions of an administrative
+file (by a manager). When this is done, the new file is created
+in a temp file and then renamed into place so that there are always
+usable administrative files, even if the update fails. This failure
+message means that the temp file could not be created.
+The update is abandoned, and the old file is available for use.
+
+=item (Green) CopyFile from to failed
+
+In an update of administrative files, the copy of the existing file to a
+backup file failed. The installation of the new file may still succeed,
+but there will not be a back up file to rever to (this should probably
+be yellow).
+
+=item (Green) Pushfile: backed up to
+
+See above, the backup of the old administrative file succeeded.
+
+=item (Red) Pushfile: Unable to install
+
+The new administrative file could not be installed. In this case,
+the old administrative file is still in use.
+
+=item (Green) Installed new < filename>.
+
+The new administrative file was successfullly installed.
+
+=item (Red) Reinitializing lond pid=
+
+The lonc child process will be sent a USR2
+signal.
+
+=item (Red) Reinitializing self
+
+We've been asked to re-read our administrative files,and
+are doing so.
+
+=item (Yellow) error:Invalid process identifier
+
+A reinit command was received, but the target part of the
+command was not valid. It must be either
+'lond' or 'lonc' but was
+
+=item (Green) isValideditCommand checking: Command = Key = newline =
+
+Checking to see if lond has been handed a valid edit
+command. It is possible the edit command is not valid
+in that case there are no log messages to indicate that.
+
+=item Result of password change for pwchange_success
+
+The password for was
+successfully changed.
+
+=item Unable to open passwd to change password
+
+Could not rewrite the
+internal password file for a user
+
+=item Result of password change for :
+
+A unix password change for was attempted
+and the pipe returned
+
+=item LWP GET: for ()
+
+The lightweight process fetch for a resource failed
+with the local filename that should
+have existed/been created was the
+corresponding URI: This is emitted in several
+places.
+
+=item Unable to move to
+
+From fetch_user_file_handler - the user file was replicated but could not
+be mv'd to its final location.
+
+=item Looking for
+
+From user_has_session_handler - This should be a Debug call instead
+it indicates lond is about to check whether the specified user has a
+session active on the specified domain on the local host.
+
+=item Client () hanging up:
+
+lond has been asked to exit by its client. The and identify the
+client systemand is the full exit command sent to the server.
+
+=item Red CRITICAL: ABNORMAL EXIT. child for server died through a crass with this error->[].
+
+A lond child terminated. NOte that this termination can also occur when the
+child receives the QUIT or DIE signals. is the process id of the child,
+ the host lond is working for, and the reason the child died
+to the best of our ability to get it (I would guess that any numeric value
+represents and errno value). This is immediately followed by
+
+=item Famous last words: Catching exception -
+
+Where log is some recent information about the state of the child.
+
+=item Red CRITICAL: TIME OUT
+
+Some timeout occured for server . THis is normally a timeout on an LWP
+doing an HTTP::GET.
+
+=item child died
+
+The reaper caught a SIGCHILD for the lond child process
+This should be modified to also display the IP of the dying child
+$children{$pid}
+
+=item Unknown child 0 died
+A child died but the wait for it returned a pid of zero which really should not
+ever happen.
+
+=item Child - looks like we missed it's death
+
+When a sigchild is received, the reaper process checks all children to see if they are
+alive. If children are dying quite quickly, the lack of signal queuing can mean
+that a signal hearalds the death of more than one child. If so this message indicates
+which other one died. is the ip of a dead child
+
+=item Free socket:
+
+The HUNTSMAN sub was called due to a SIGINT in a child process. The socket is being shutdown.
+for whatever reason, is printed but in fact shutdown() is not documented
+to return anything. This is followed by:
+
+=item Red CRITICAL: Shutting down
+
+Just prior to exit.
+
+=item Free socket:
+
+The HUPSMAN sub was called due to a SIGHUP. all children get killsed, and lond execs itself.
+This is followed by:
+
+=item (Red) CRITICAL: Restarting
+
+lond is about to exec itself to restart.
+
+=item (Blue) Updating connections
+
+(In response to a USR2). All the children (except the one for localhost)
+are about to be killed, the hosts tab reread, and Apache reloaded via apachereload.
+
+=item (Blue) UpdateHosts killing child for ip
+
+Due to USR2 as above.
+
+=item (Green) keeping child for ip (pid = )
+
+In response to USR2 as above, the child indicated is not being restarted because
+it's assumed that we'll always need a child for the localhost.
+
+
+=item Going to check on the children
+
+Parent is about to check on the health of the child processes.
+Note that this is in response to a USR1 sent to the parent lond.
+there may be one or more of the next two messages:
+
+=item is dead
+
+A child that we have in our child hash as alive has evidently died.
+
+=item Child did not respond
+
+In the health check the child did not update/produce a pid_.txt
+file when sent it's USR1 signal. That process is killed with a 9 signal, as it's
+assumed to be hung in some un-fixable way.
+
+=item Finished checking children
+
+Master processs's USR1 processing is cojmplete.
+
+=item (Red) CRITICAL: ------- Starting ------
+
+(There are more '-'s on either side). Lond has forked itself off to
+form a new session and is about to start actual initialization.
+
+=item (Green) Attempting to start child ()
+
+Started a new child process for . Client is IO::Socket object
+connected to the child. This was as a result of a TCP/IP connection from a client.
+
+=item Unable to determine who caller was, getpeername returned nothing
+
+In child process initialization. either getpeername returned undef or
+a zero sized object was returned. Processing continues, but in my opinion,
+this should be cause for the child to exit.
+
+=item Unable to determine clientip
+
+In child process initialization. The peer address from getpeername was not defined.
+The client address is stored as "Unavailable" and processing continues.
+
+=item (Yellow) INFO: Connection connection type =
+
+In child initialization. A good connectionw as received from .
+
+=over 2
+
+=item
+
+is the name of the client from hosts.tab.
+
+=item
+
+Is the connection type which is either
+
+=over 2
+
+=item manager
+
+The connection is from a manager node, not in hosts.tab
+
+=item client
+
+the connection is from a non-manager in the hosts.tab
+
+=item both
+
+The connection is from a manager in the hosts.tab.
+
+=back
+
+=back
+
+=item (Blue) Certificates not installed -- trying insecure auth
+
+One of the certificate file, key file or
+certificate authority file could not be found for a client attempting
+SSL connection intiation. COnnection will be attemptied in in-secure mode.
+(this would be a system with an up to date lond that has not gotten a
+certificate from us).
+
+=item (Green) Successful local authentication
+
+A local connection successfully negotiated the encryption key.
+In this case the IDEA key is in a file (that is hopefully well protected).
+
+=item (Green) Successful ssl authentication with
+
+The client ( is the peer's name in hosts.tab), has successfully
+negotiated an SSL connection with this child process.
+
+=item (Green) Successful insecure authentication with
+
+
+The client has successfully negotiated an insecure connection withthe child process.
+
+=item (Yellow) Attempted insecure connection disallowed
+
+The client attempted and failed to successfully negotiate a successful insecure
+connection. This can happen either because the variable londAllowInsecure is false
+or undefined, or becuse the child did not successfully echo back the challenge
+string.
+
+
+=back
+
+=back
+
+
+=cut