--- loncom/xml/lonplot.pm 2002/05/01 15:56:23 1.75 +++ loncom/xml/lonplot.pm 2012/07/03 11:29:57 1.156 @@ -1,7 +1,7 @@ # The LearningOnline Network with CAPA # Dynamic plot # -# $Id: lonplot.pm,v 1.75 2002/05/01 15:56:23 matthew Exp $ +# $Id: lonplot.pm,v 1.156 2012/07/03 11:29:57 foxr Exp $ # # Copyright Michigan State University Board of Trustees # @@ -25,24 +25,43 @@ # # http://www.lon-capa.org/ # -# 12/15/01 Matthew -# 12/17 12/18 12/19 12/20 12/21 12/27 12/28 12/30 12/31 Matthew -# 01/01/02 Matthew -# 01/02 01/03 01/04 01/07 01/08 01/09 Matthew -# 01/21 02/05 02/06 2/28Matthew + + + package Apache::lonplot; use strict; +use warnings FATAL=>'all'; +no warnings 'uninitialized'; use Apache::File; use Apache::response; use Apache::lonxml; use Apache::edit; +use Apache::lonnet; +use LONCAPA; + + +use vars qw/$weboutputformat $version/; + + BEGIN { - &Apache::lonxml::register('Apache::lonplot',('gnuplot')); + &Apache::lonxml::register('Apache::lonplot',('gnuplot')); + # + # Determine the version of GNUPLOT + $weboutputformat = 'gif'; + my $versionstring = `gnuplot --version 2>/dev/null`; + ($version) = ($versionstring =~ /^gnuplot ([\d.]+)/); + if ($version >= 4) { + $weboutputformat = 'png'; + } + } + +=pod + ## ## Description of data structures: ## @@ -74,9 +93,17 @@ BEGIN { ## ## ################################################################### +=cut + my $max_str_len = 50; # if a label, title, xlabel, or ylabel text # is longer than this, it will be truncated. +my %linetypes = + ( + solid => 1, + dashed => 0 + ); + my %linestyles = ( lines => 2, # Maybe this will be used in the future @@ -91,6 +118,7 @@ my %linestyles = yerrorbars => [3,4], xyerrorbars => [4,6], boxes => 3, + filledcurves => 2, vector => 4 ); @@ -99,10 +127,10 @@ my $real_test = sub {$_[0]=~s/\s+//g;$_[0]=~/^[+-]?\d*\.?\d*([eE][+-]\d+)?$/}; my $pos_real_test = sub {$_[0]=~s/\s+//g;$_[0]=~/^[+]?\d*\.?\d*([eE][+-]\d+)?$/}; -my $color_test = sub {$_[0]=~s/\s+//g;$_[0]=~/^x[\da-f]{6}$/}; +my $color_test = sub {$_[0]=~s/\s+//g;$_[0]=~/^x[\da-fA-F]{6}$/}; my $onoff_test = sub {$_[0]=~/^(on|off)$/}; my $key_pos_test = sub {$_[0]=~/^(top|bottom|right|left|outside|below| )+$/}; -my $sml_test = sub {$_[0]=~/^(small|medium|large)$/}; +my $sml_test = sub {$_[0]=~/^(\d+|small|medium|large)$/}; my $linestyle_test = sub {exists($linestyles{$_[0]})}; my $words_test = sub {$_[0]=~s/\s+/ /g;$_[0]=~/^([\w~!\@\#\$\%^&\*\(\)-=_\+\[\]\{\}:\;\'<>,\.\/\?\\]+ ?)+$/}; @@ -112,76 +140,52 @@ my $words_test = sub {$_[0]=~s/\s+/ ## ## ################################################################### my @gnuplot_edit_order = - qw/alttag bgcolor fgcolor height width font transparent grid border align/; + qw/alttag bgcolor fgcolor height width texwidth fontface font texfont + transparent grid samples + border align plotcolor plottype gridtype lmargin rmargin + tmargin bmargin major_ticscale minor_ticscale boxwidth gridlayer fillstyle + pattern solid/; -my $gnuplot_help_text = <<"ENDPLOTHELP"; -

-The gnuplot tag allows an author to design a plot which can -be created on the fly. This is intended for use in homework problems -where each student needs to see a distinct plot. It can be used in -conjunction with a script tag to generate random plots. -

-A gnuplot tag can contain the following sub-tags: -

-
-
Plot Label -
Allows you to place text at a given (x,y) coordinate on the plot. -
Plot Title -
The title of the plot -
Plot Xlabel -
The label on the horizontal axis of the plot -
Plot Ylabel -
The label on the vertical axis of the plot -
Plot Axes -
allows specification of the x and y ranges displayed in the plot -
Plot Key -
Lists the functions displayed in the plot. -
Plot Curve -
Sets the data used in the plot. -
Plot Tics -
Allows specification of the x and y coordinate 'tics' on the axes. -This is mostly used to adjust the grid lines when a grid is displayed. -
-If you are having trouble with your plot, please read the help -available on Plot Curve. -ENDPLOTHELP +my $margin_choices = ['default',0..20]; my %gnuplot_defaults = ( alttag => { default => 'dynamically generated plot', test => $words_test, - description => 'brief description of the plot', + description => 'Brief description of the plot', edit_type => 'entry', size => '40' }, height => { default => 300, test => $int_test, - description => 'height of image (pixels)', + description => 'Height of image (pixels)', edit_type => 'entry', size => '10' }, width => { default => 400, test => $int_test, - description => 'width of image (pixels)', + description => 'Width of image (pixels)', edit_type => 'entry', size => '10' }, bgcolor => { default => 'xffffff', test => $color_test, - description => 'background color of image (xffffff)', + description => 'Background color of image (xffffff)', edit_type => 'entry', - size => '10' + size => '10', + class => 'colorchooser' }, fgcolor => { default => 'x000000', test => $color_test, - description => 'foreground color of image (x000000)', + description => 'Foreground color of image (x000000)', edit_type => 'entry', - size => '10' + size => '10', + class => 'colorchooser' }, transparent => { default => 'off', @@ -195,6 +199,19 @@ my %gnuplot_defaults = description => 'Display grid', edit_type => 'onoff' }, + gridlayer => { + default => 'off', + test => $onoff_test, + description => 'Display grid front layer over filled boxes or filled curves', + edit_type => 'onoff' + }, + box_border => { + default => 'noborder', + test => sub {$_[0]=~/^(noborder|border)$/}, + description => 'Draw border for boxes', + edit_type => 'choice', + choices => ['border','noborder'] + }, border => { default => 'on', test => $onoff_test, @@ -202,19 +219,138 @@ my %gnuplot_defaults = edit_type => 'onoff' }, font => { - default => 'medium', + default => '9', test => $sml_test, - description => 'Size of font to use', + description => 'Font size to use in web output (pts)', edit_type => 'choice', - choices => ['small','medium','large'] + choices => [['5','5 (small)'],'6','7','8',['9','9 (medium)'],'10',['11','11 (large)'],'12','15'] + }, + fontface => { + default => 'sans-serif', + test => sub {$_[0]=~/^(sans-serif|serif|classic)$/}, + description => 'Type of font to use', + edit_type => 'choice', + choices => ['sans-serif','serif', 'classic'] + }, + samples => { + default => '100', + test => $int_test, + description => 'Number of samples for non-data plots', + edit_type => 'choice', + choices => ['100','200','500','1000','2000','5000'] }, align => { - default => 'center', - test => sub {$_[0]=~/^(left|right|center)$/}, - description => 'alignment for image in html', + default => 'middle', + test => sub {$_[0]=~/^(left|right|middle|center)$/}, + description => 'Alignment for image in HTML', edit_type => 'choice', - choices => ['left','right','center'] - } + choices => ['left','right','middle'] + }, + texwidth => { + default => '93', + test => $int_test, + description => 'Width of plot when printed (mm)', + edit_type => 'entry', + size => '5' + }, + texfont => { + default => '22', + test => $int_test, + description => 'Font size to use in TeX output (pts):', + edit_type => 'choice', + choices => [qw/8 10 12 14 16 18 20 22 24 26 28 30 32 34 36/], + }, + plotcolor => { + default => 'monochrome', + test => sub {$_[0]=~/^(monochrome|color|colour)$/}, + description => 'Color setting for printing:', + edit_type => 'choice', + choices => [qw/monochrome color colour/], + }, + pattern => { + default => '', + test => $int_test, + description => 'Pattern value for boxes:', + edit_type => 'choice', + choices => [0,1,2,3,4,5,6] + }, + solid => { + default => 0, + test => $real_test, + description => 'The density of fill style for boxes', + edit_type => 'entry', + size => '5' + }, + fillstyle => { + default => 'empty', + test => sub {$_[0]=~/^(empty|solid|pattern)$/}, + description => 'Filled style for boxes:', + edit_type => 'choice', + choices => ['empty','solid','pattern'] + }, + plottype => { + default => 'Cartesian', + test => sub {$_[0]=~/^(Polar|Cartesian)$/}, + description => 'Plot type:', + edit_type => 'choice', + choices => ['Cartesian','Polar'] + }, + gridtype => { + default => 'Cartesian', + test => sub {$_[0]=~/^(Polar|Cartesian|Linear-Log|Log-Linear|Log-Log)$/}, + description => 'Grid type:', + edit_type => 'choice', + choices => ['Cartesian','Polar','Linear-Log','Log-Linear','Log-Log'] + }, + lmargin => { + default => 'default', + test => sub {$_[0]=~/^(default|\d+)$/}, + description => 'Left margin width (pts):', + edit_type => 'choice', + choices => $margin_choices, + }, + rmargin => { + default => 'default', + test => sub {$_[0]=~/^(default|\d+)$/}, + description => 'Right margin width (pts):', + edit_type => 'choice', + choices => $margin_choices, + }, + tmargin => { + default => 'default', + test => sub {$_[0]=~/^(default|\d+)$/}, + description => 'Top margin width (pts):', + edit_type => 'choice', + choices => $margin_choices, + }, + bmargin => { + default => 'default', + test => sub {$_[0]=~/^(default|\d+)$/}, + description => 'Bottom margin width (pts):', + edit_type => 'choice', + choices => $margin_choices, + }, + boxwidth => { + default => '', + test => $real_test, + description => 'Width of boxes, default is auto', + edit_type => 'entry', + size => '5' + }, + major_ticscale => { + default => '1', + test => $real_test, + description => 'Size of major tic marks (plot coordinates)', + edit_type => 'entry', + size => '5' + }, + minor_ticscale => { + default => '0.5', + test => $real_test, + description => 'Size of minor tic mark (plot coordinates)', + edit_type => 'entry', + size => '5' + }, ); my %key_defaults = @@ -235,7 +371,7 @@ my %key_defaults = pos => { default => 'top right', test => $key_pos_test, - description => 'position of the key on the plot', + description => 'Position of the key on the plot', edit_type => 'choice', choices => ['top left','top right','bottom left','bottom right', 'outside','below'] @@ -247,14 +383,14 @@ my %label_defaults = xpos => { default => 0, test => $real_test, - description => 'x position of label (graph coordinates)', + description => 'X position of label (graph coordinates)', edit_type => 'entry', size => '10' }, ypos => { default => 0, test => $real_test, - description => 'y position of label (graph coordinates)', + description => 'Y position of label (graph coordinates)', edit_type => 'entry', size => '10' }, @@ -264,166 +400,195 @@ my %label_defaults = description => 'justification of the label text on the plot', edit_type => 'choice', choices => ['left','right','center'] + }, + rotate => { + default => 0, + test => $real_test, + description => 'Rotation of label (degrees)', + edit_type => 'entry', + size => '10', } ); -my @tic_edit_order = ('location','mirror','start','increment','end'); +my @tic_edit_order = ('location','mirror','start','increment','end', + 'minorfreq'); my %tic_defaults = ( location => { default => 'border', test => sub {$_[0]=~/^(border|axis)$/}, - description => 'Location of tick marks', + description => 'Location of major tic marks', edit_type => 'choice', choices => ['border','axis'] }, mirror => { default => 'on', test => $onoff_test, - description => 'mirror ticks on opposite axis?', + description => 'Mirror tics on opposite axis?', edit_type => 'onoff' }, start => { default => '-10.0', test => $real_test, - description => 'Start ticks at', + description => 'Start major tics at', edit_type => 'entry', size => '10' }, increment => { default => '1.0', test => $real_test, - description => 'Place a tick every', + description => 'Place a major tic every', edit_type => 'entry', size => '10' }, end => { default => ' 10.0', test => $real_test, - description => 'Stop ticks at ', + description => 'Stop major tics at ', edit_type => 'entry', size => '10' }, + minorfreq => { + default => '0', + test => $int_test, + description => 'Number of minor tics per major tic mark', + edit_type => 'entry', + size => '10' + }, ); -my @axis_edit_order = ('color','xmin','xmax','ymin','ymax'); +my @axis_edit_order = ('color','xmin','xmax','ymin','ymax','xformat', 'yformat', 'xzero', 'yzero'); my %axis_defaults = ( color => { default => 'x000000', test => $color_test, - description => 'color of axes (x000000)', + description => 'Color of grid lines (x000000)', edit_type => 'entry', - size => '10' + size => '10', + class => 'colorchooser' }, xmin => { default => '-10.0', test => $real_test, - description => 'minimum x-value shown in plot', + description => 'Minimum x-value shown in plot', edit_type => 'entry', size => '10' }, xmax => { default => ' 10.0', test => $real_test, - description => 'maximum x-value shown in plot', + description => 'Maximum x-value shown in plot', edit_type => 'entry', size => '10' }, ymin => { default => '-10.0', test => $real_test, - description => 'minimum y-value shown in plot', + description => 'Minimum y-value shown in plot', edit_type => 'entry', size => '10' }, ymax => { default => ' 10.0', test => $real_test, - description => 'maximum y-value shown in plot', + description => 'Maximum y-value shown in plot', edit_type => 'entry', size => '10' - } + }, + xformat => { + default => 'on', + test => sub {$_[0]=~/^(on|off|\d+(f|F|e|E))$/}, + description => 'X-axis number formatting', + edit_type => 'choice', + choices => ['on', 'off', '2e', '2f'], + }, + yformat => { + default => 'on', + test => sub {$_[0]=~/^(on|off|\d+(f|F|e|E))$/}, + description => 'Y-axis number formatting', + edit_type => 'choice', + choices => ['on', 'off', '2e', '2f'], + }, + + xzero => { + default => 'off', + test => sub {$_[0]=~/^(off|line|thick-line|dotted)$/}, + description => 'Show x-zero (y=0) axis', + edit_type => 'choice', + choices => ['off', 'line', 'thick-line', 'dotted'], + }, + + yzero => { + default => 'off', + test => sub {$_[0]=~/^(off|line|thick-line|dotted)$/}, + description => 'Show y-zero (x=0) axis', + edit_type => 'choice', + choices => ['off', 'line', 'thick-line', 'dotted'], + }, ); -my $curve_help_text = <<"ENDCURVEHELP"; -The curve tag is where you set the data to be plotted by gnuplot. -There are two ways of entering the information: -
-
Curve Data -
Using a data tag you can specify the numbers used to produce -the plot. -

-By default, two data tags will be available in a plot. The -first will specify X coordinates of the data and the second will -give the Y coordinates of the data. When working with a linestyle that -requires more than two data sets, inserting another data tag is -required. Unfortunately, you must make sure the data tags appear -in the order gnuplot expects the data. -

-Specifying the data should usually be done with a perl variable or array, -such as \@Xdata and \@Ydata. You may also specify numerical data seperated -by commas. Again, the order of the data tags is important. The -first tag will be the X data and the second will be the Y data. -

-
Curve Function -
The function tag allows you to specify the curve to be -plotted as a formula that gnuplot can understand. Be careful using this -tag. It is surprisingly easy to give gnuplot a function it cannot deal -with properly. Be explicit: 2*sin(2*3.141592*x/4) will work but -2sin(2*3.141592x/4) will not. If you do not receive any errors in the -gnuplot data but still do not have an image produced, it is likely there -is an error in your function tag. -
-ENDCURVEHELP - -my @curve_edit_order = ('color','name','linestyle','pointtype','pointsize'); +my @curve_edit_order = ('color','name','linestyle','linewidth','linetype','pointtype','pointsize','limit'); my %curve_defaults = ( color => { default => 'x000000', test => $color_test, - description => 'color of curve (x000000)', + description => 'Color of curve (x000000)', edit_type => 'entry', - size => '10' + size => '10', + class => 'colorchooser' }, name => { default => '', test => $words_test, - description => 'name of curve to appear in key', + description => 'Name of curve to appear in key', edit_type => 'entry', size => '20' }, linestyle => { default => 'lines', test => $linestyle_test, - description => 'Line style', + description => 'Plot with:', edit_type => 'choice', choices => [keys(%linestyles)] }, -# gnuplots term=gif driver does not handle linewidth :( -# linewidth => { -# default => 1, -# test => $int_test, -# description => 'Line width (may not apply to all line styles)', -# edit_type => 'choice', -# choices => [1,2,3,4,5,6,7,8,9,10] -# }, + linewidth => { + default => 1, + test => $int_test, + description => 'Line width (may not apply to all plot styles)', + edit_type => 'choice', + choices => [1,2,3,4,5,6,7,8,9,10] + }, + linetype => { + default => 'solid', + test => sub {$_[0]=~/^(solid|dashed)$/}, + description => 'Line type (may not apply to all plot styles)', + edit_type => 'choice', + choices => ['solid', 'dashed'] + }, pointsize => { default => 1, test => $pos_real_test, - description => 'point size (may not apply to all line styles)', + description => 'Point size (may not apply to all plot styles)', edit_type => 'entry', size => '5' }, pointtype => { default => 1, test => $int_test, - description => 'point type (may not apply to all line styles)', + description => 'Point type (may not apply to all plot styles)', edit_type => 'choice', choices => [0,1,2,3,4,5,6] - } + }, + limit => { + default => 'closed', + test => sub {$_[0]=~/^(above|below|closed|x1|x2|y1|y2)$/}, + description => 'Point to fill -- for filledcurves', + edit_type => 'choice', + choices => ['above', 'below', 'closed','x1','x2','y1','y2'] + }, ); ################################################################### @@ -431,13 +596,15 @@ my %curve_defaults = ## parsing and edit rendering ## ## ## ################################################################### -my (%plot,%key,%axis,$title,$xlabel,$ylabel,@labels,@curves,%xtics,%ytics); + +undef %Apache::lonplot::plot; +my (%key,%axis,$title,$xlabel,$ylabel,@labels,@curves,%xtics,%ytics); sub start_gnuplot { - %plot = (); %key = (); %axis = (); - $title = undef; $xlabel = undef; $ylabel = undef; - $#labels = -1; $#curves = -1; - %xtics = (); %ytics = (); + undef(%Apache::lonplot::plot); undef(%key); undef(%axis); + undef($title); undef($xlabel); undef($ylabel); + undef(@labels); undef(@curves); + undef(%xtics); undef(%ytics); # my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; my $result=''; @@ -446,18 +613,29 @@ sub start_gnuplot { 'xtics','ytics')); push (@Apache::lonxml::namespace,'lonplot'); if ($target eq 'web' || $target eq 'tex') { - &get_attributes(\%plot,\%gnuplot_defaults,$parstack,$safeeval, + &get_attributes(\%Apache::lonplot::plot,\%gnuplot_defaults,$parstack,$safeeval, $tagstack->[-1]); } elsif ($target eq 'edit') { $result .= &Apache::edit::tag_start($target,$token,'GnuPlot'); - $result .= &make_javascript(); - $result .= &help_win($gnuplot_help_text); $result .= &edit_attributes($target,$token,\%gnuplot_defaults, - \@gnuplot_edit_order); + \@gnuplot_edit_order) + .&Apache::edit::end_row() + .&Apache::edit::start_spanning_row(); } elsif ($target eq 'modified') { my $constructtag=&Apache::edit::get_new_args ($token,$parstack,$safeeval,keys(%gnuplot_defaults)); + if ($constructtag) { + # + # The color chooser does not prepent x to the color values + # Do that here: + # + foreach my $attribute ('bgcolor', 'fgcolor') { + my $value = $token->[2]{$attribute}; + if (defined $value && !($value =~ /^x/)) { + $token->[2]{$attribute} = 'x' . $value; + } + } $result = &Apache::edit::rebuild_tag($token); } } @@ -471,9 +649,11 @@ sub end_gnuplot { ('title','xlabel','ylabel','key','axis','label','curve')); my $result = ''; my $randnumber; + my $tmpdir =LONCAPA::tempdir(); # Where temporary files live: + # need to call rand everytime start_script would evaluate, as the # safe space rand number generator and the global rand generator - # are not seperate + # are not separate if ($target eq 'web' || $target eq 'tex' || $target eq 'grade' || $target eq 'answer') { $randnumber=int(rand(1000)); @@ -482,24 +662,28 @@ sub end_gnuplot { &check_inputs(); # Make sure we have all the data we need ## ## Determine filename - my $tmpdir = '/home/httpd/perl/tmp/'; - my $filename = $ENV{'user.name'}.'_'.$ENV{'user.domain'}. + my $filename = $env{'user.name'}.'_'.$env{'user.domain'}. '_'.time.'_'.$$.$randnumber.'_plot'; ## Write the plot description to the file &write_gnuplot_file($tmpdir,$filename,$target); - $filename = &Apache::lonnet::escape($filename); + $filename = &escape($filename); ## return image tag for the plot if ($target eq 'web') { $result .= <<"ENDIMAGE"; -$plot{'alttag'} +$Apache::lonplot::plot{'alttag'} ENDIMAGE } elsif ($target eq 'tex') { - &Apache::lonnet::ssi("/cgi-bin/plot.gif?file=$filename.data&output=eps"); - $result = '\graphicspath{{/home/httpd/perl/tmp/}}\fbox{\includegraphics{'.&Apache::lonnet::unescape($filename).'.eps}}'; + &Apache::lonxml::debug(" gnuplot wid = $Apache::lonplot::plot{'width'}"); + &Apache::lonxml::debug(" gnuplot ht = $Apache::lonplot::plot{'height'}"); + #might be inside the safe space, register the URL for later + &Apache::lonxml::register_ssi("/cgi-bin/plot.gif?file=$filename.data&output=eps"); + $result = "%DYNAMICIMAGE:$Apache::lonplot::plot{'width'}:$Apache::lonplot::plot{'height'}:$Apache::lonplot::plot{'texwidth'}\n"; + $result .= '\graphicspath{{'.$tmpdir.'}}'."\n"; + $result .= '\includegraphics[width='.$Apache::lonplot::plot{'texwidth'}.' mm]{'.&unescape($filename).'.eps}'; } } elsif ($target eq 'edit') { $result.=&Apache::edit::tag_end($target,$token); @@ -570,6 +754,52 @@ sub end_ytics { return $result; } +##-----------------------------------------------------------------font +my %font_properties = + ( + 'classic' => { + face => 'classic', + file => 'DejaVuSansMono-Bold', + printname => 'Helvetica', + tex_no_file => 1, + }, + 'sans-serif' => { + face => 'sans-serif', + file => 'DejaVuSans', + printname => 'DejaVuSans', + }, + 'serif' => { + face => 'serif', + file => 'DejaVuSerif', + printname => 'DejaVuSerif', + }, + ); + +sub get_font { + my ($target) = @_; + my ($size, $selected_font); + + if ( $Apache::lonplot::plot{'font'} =~ /^(small|medium|large)/) { + $selected_font = $font_properties{'classic'}; + if ( $Apache::lonplot::plot{'font'} eq 'small') { + $size = '5'; + } elsif ( $Apache::lonplot::plot{'font'} eq 'medium') { + $size = '9'; + } elsif ( $Apache::lonplot::plot{'font'} eq 'large') { + $size = '11'; + } else { + $size = '9'; + } + } else { + $size = $Apache::lonplot::plot{'font'}; + $selected_font = $font_properties{$Apache::lonplot::plot{'fontface'}}; + } + if ($target eq 'tex' && defined($Apache::lonplot::plot{'texfont'})) { +# $selected_font = $font_properties{'classic'}; + $size = $Apache::lonplot::plot{'texfont'}; + } + return ($size, $selected_font); +} ##----------------------------------------------------------------- key sub start_key { @@ -601,27 +831,400 @@ sub end_key { return $result; } +sub parse_label { + my ($target,$text) = @_; + my $parser=HTML::LCParser->new(\$text); + my $result; + while (my $token=$parser->get_token) { + if ($token->[0] eq 'S') { + if ($token->[1] eq 'sub') { + $result .= '_{'; + } elsif ($token->[1] eq 'sup') { + $result .= '^{'; + } else { + $result .= $token->[4]; + } + } elsif ($token->[0] eq 'E') { + if ($token->[1] eq 'sub' + || $token->[1] eq 'sup') { + $result .= '}'; + } else { + $result .= $token->[2]; + } + } elsif ($token->[0] eq 'T') { + $result .= &replace_entities($target,$token->[1]); + } + } + return $result; +} + +# +# Note that there are severe restrictions on font selection in the +# ps driver now. later in life Gnuplot is supposed to support +# utf-8 fonts in the posts script driver. When this happens, +# the tex entries with comments that include the word +# should be changed to print the correct glyphs rather than some +# approximation or fallback of what is intended. + +my %lookup = + ( # Greek alphabet: + + '(Alpha|#913)' => {'tex' => '{/Symbol A}', 'web' => "\x{391}"}, + '(Beta|#914)' => {'tex' => '{/Symbol B}', 'web' => "\x{392}"}, + '(Chi|#935)' => {'tex' => '{/Symbol C}', 'web' => "\x{3A7}"}, + '(Delta|#916)' => {'tex' => '{/Symbol D}', 'web' => "\x{394}"}, + '(Epsilon|#917)' => {'tex' => '{/Symbol E}', 'web' => "\x{395}"}, + '(Phi|#934)' => {'tex' => '{/Symbol F}', 'web' => "\x{3A6}"}, + '(Gamma|#915)' => {'tex' => '{/Symbol G}', 'web' => "\x{393}"}, + '(Eta|#919)' => {'tex' => '{/Symbol H}', 'web' => "\x{397}"}, + '(Iota|#921)' => {'tex' => '{/Symbol I}', 'web' => "\x{399}"}, + '(Kappa|#922)' => {'tex' => '{/Symbol K}', 'web' => "\x{39A}"}, + '(Lambda|#923)' => {'tex' => '{/Symbol L}', 'web' => "\x{39B}"}, + '(Mu|#924)' => {'tex' => '{/Symbol M}', 'web' => "\x{39C}"}, + '(Nu|#925)' => {'tex' => '{/Symbol N}', 'web' => "\x{39D}"}, + '(Omicron|#927)' => {'tex' => '{/Symbol O}', 'web' => "\x{39F}"}, + '(Pi|#928)' => {'tex' => '{/Symbol P}', 'web' => "\x{3A0}"}, + '(Theta|#920)' => {'tex' => '{/Symbol Q}', 'web' => "\x{398}"}, + '(Rho|#929)' => {'tex' => '{/Symbol R}', 'web' => "\x{3A1}"}, + '(Sigma|#931)' => {'tex' => '{/Symbol S}', 'web' => "\x{3A3}"}, + '(Tau|#932)' => {'tex' => '{/Symbol T}', 'web' => "\x{3A4}"}, + '(Upsilon|#933)' => {'tex' => '{/Symbol U}', 'web' => "\x{3A5}"}, + '(Omega|#937)' => {'tex' => '{/Symbol W}', 'web' => "\x{3A9}"}, + '(Xi|#926)' => {'tex' => '{/Symbol X}', 'web' => "\x{39E}"}, + '(Psi|#936)' => {'tex' => '{/Symbol Y}', 'web' => "\x{3A8}"}, + '(Zeta|#918)' => {'tex' => '{/Symbol Z}', 'web' => "\x{396}"}, + '(alpha|#945)' => {'tex' => '{/Symbol a}', 'web' => "\x{3B1}"}, + '(beta|#946)' => {'tex' => '{/Symbol b}', 'web' => "\x{3B2}"}, + '(chi|#967)' => {'tex' => '{/Symbol c}', 'web' => "\x{3C7}"}, + '(delta|#948)' => {'tex' => '{/Symbol d}', 'web' => "\x{3B4}"}, + '(epsilon|#949)' => {'tex' => '{/Symbol e}', 'web' => "\x{3B5}"}, + '(phi|#966)' => {'tex' => '{/Symbol f}', 'web' => "\x{3C6}"}, + '(gamma|#947)' => {'tex' => '{/Symbol g}', 'web' => "\x{3B3}"}, + '(eta|#951)' => {'tex' => '{/Symbol h}', 'web' => "\x{3B7}"}, + '(iota|#953)' => {'tex' => '{/Symbol i}', 'web' => "\x{3B9}"}, + '(kappa|#954)' => {'tex' => '{/Symbol k}', 'web' => "\x{3BA}"}, + '(lambda|#955)' => {'tex' => '{/Symbol k}', 'web' => "\x{3BB}"}, + '(mu|#956)' => {'tex' => '{/Symbol m}', 'web' => "\x{3BC}"}, + '(nu|#957)' => {'tex' => '{/Symbol n}', 'web' => "\x{3BD}"}, + '(omicron|#959)' => {'tex' => '{/Symbol o}', 'web' => "\x{3BF}"}, + '(pi|#960)' => {'tex' => '{/Symbol p}', 'web' => "\x{3C0}"}, + '(theta|#952)' => {'tex' => '{/Symbol q}', 'web' => "\x{3B8}"}, + '(rho|#961)' => {'tex' => '{/Symbol r}', 'web' => "\x{3C1}"}, + '(sigma|#963)' => {'tex' => '{/Symbol s}', 'web' => "\x{3C3}"}, + '(tau|#964)' => {'tex' => '{/Symbol t}', 'web' => "\x{3C4}"}, + '(upsilon|#965)' => {'tex' => '{/Symbol u}', 'web' => "\x{3C5}"}, + '(omega|#969)' => {'tex' => '{/Symbol w}', 'web' => "\x{3C9}"}, + '(xi|#958)' => {'tex' => '{/Symbol x}', 'web' => "\x{3BE}"}, + '(psi|#968)' => {'tex' => '{/Symbol y}', 'web' => "\x{3C8}"}, + '(zeta|#950)' => {'tex' => '{/Symbol z}', 'web' => "\x{3B6}"}, + '(thetasym|#977)' => {'tex' => '{/Symbol \165}', 'web' => "\x{3d1}"}, + '(upsih|#978)' => {'tex' => '{/Symbol \241}', 'web' => "\x{3d2}"}, + '(piv|#982)' => {'tex' => '{/Symbol \166}', 'web' => "\x{3d6}"}, + + + # Punctuation: + + '(quot|#034)' => {'tex' => '\42', 'web' => '\42'}, + '(amp|#038)' => {'tex' => '\46', 'web' => '\46'}, + '(lt|#060)' => {'tex' => '\74', 'web' => '\74'}, + '(gt|#062)' => {'tex' => '\76', 'web' => '\76'}, + '#131' => {'tex' => '{/Symbol \246}', 'web' => "\x{192}"}, + '#132' => {'tex' => '{/Text \271}', 'web' => "\x{201e}"}, + '#133' => {'tex' => '{/Symbol \274}', 'web'=> "\x{2026}"}, + '#134' => {'tex' => '{/Text \262}', 'web' => "\x{2020}"}, + '#135' => {'tex' => '{/Text \263}', 'web' => "\x{2021}"}, + '#136' => {'tex' => '\\\\^', 'web' => '\\\\^'}, + '#137' => {'tex' => '%o', 'web' => "\x{2030}"}, # Per Mille + '#138' => {'tex' => 'S', 'web' => "\x{160}"}, # S-Caron + '#139' => {'tex' => '<', 'web' => '<'}, + '#140' => {'tex' => 'AE', 'web' => "\x{152}"}, # AE ligature + '#145' => {'tex' => '\140', 'web' => "\x{2018}"}, + '#146' => {'tex' => '\47', 'web' => "\x{2019}"}, + '#147' => {'tex' => '\140\140', 'web' => "\x{201c}"}, # Left " + '#148' => {'tex' => '\47\47', 'web' => '\\"'}, # Right " + '#149' => {'tex' => '{/Symbol \267}', 'web' => "\x{2022}"}, + '#150' => {'tex' => '{/Text \55}', 'web' => "\x{2013}"}, # en dash + '#151' => {'tex' => '{/Symbol \55}', 'web' => "\x{2014}"}, # em dash + '#152' => {'tex' => '\\\\~', 'web' => '\\\\~'}, + '#153' => {'tex' => '{/Symbol \324}', 'web' => "\x{2122}"}, # trademark + + # Accented letters, and other furreign language glyphs. + + '#154' => {'tex' => 's', 'web' => "\x{161}"}, # small s-caron no ps. + '#155' => {'tex' => '>', 'web' => '\76'}, # > + '#156' => {'tex' => '{/Text \366}', 'web' => "\x{153}"}, # oe ligature. + '#159', => {'tex' => 'Y', 'web' => "\x{178}"}, # Y-umlaut - can't print + '(nbsp|#160)' => {'tex' => ' ', 'web' => ' '}, # non breaking space. + '(iexcl|#161)' => {'tex' => '{/Text \241}', 'web' => "\x{a1}"}, # inverted ! + '(cent|#162)' => {'tex' => '{/Text \242}', 'web' => "\x{a2}"}, # Cent currency. + '(pound|#163)' => {'tex' => '{/Text \243}', 'web' => "\x{a3}"}, # GB Pound currency. + '(curren|#164)' => {'tex' => '{/ZapfDingbats \161}','web' => "\x{a4}"}, # Generic currency symb. + '(yen|#165)' => {'tex' => '{/Text \245}', 'web' => "\x{a5}"}, # Yen currency. + '(brvbar|#166)' => {'tex' => '{/Symbol \174}', 'web' => "\x{a6}"}, # Broken vert bar no print. + '(sect|#167)' => {'tex' => '{\247}', 'web' => "\x{a7}"}, # Section symbol. + '(uml|#168)' => {'tex' => '{\250}', 'web' => "\x{a8}"}, # 'naked' umlaut. + '(copy|#169)' => {'tex' => '{/Symbol \343}', 'web' => "\x{a9}"}, # Copyright symbol. + '(ordf|#170)' => {'tex' => '{/Text \343}', 'web' => "\x{aa}"}, # Feminine ordinal. + '(laquo|#171)' => {'tex' => '{/Text \253}', 'web' => "\x{ab}"}, # << quotes. + '(not|#172)' => {'tex' => '\254', 'web' => "\x{ac}"}, # Logical not. + '(shy|#173)' => {'tex' => '\255', 'web' => "\x{ad}"}, # soft hyphen. + '(reg|#174)' => {'tex' => '{/Symbol \342}', 'web' => "\x{ae}"}, # Registered tm. + '(macr|#175)' => {'tex' => '^{\255}', 'web' => "\x{af}"}, # 'naked' macron (overbar). + '(deg|#176)' => {'tex' => '{/Text \260}', 'web' => "\x{b0}"}, # Degree symbo..` + '(plusmn|#177)' => {'tex' => '{/Symbol \261}', 'web' => "\x{b1}"}, # +/- symbol. + '(sup2|#178)' => {'tex' => '^2', 'web' => "\x{b2}"}, # Superscript 2. + '(sup3|#179)' => {'tex' => '^3', 'web' => "\x{b3}"}, # Superscript 3. + '(acute|#180)' => {'tex' => '{/Text \222}', 'web' => "\x{b4}"}, # 'naked' acute accent. + '(micro|#181)' => {'tex' => '{/Symbol \155}', 'web' => "\x{b5}"}, # Micro (small mu). + '(para|#182)' => {'tex' => '{/Text \266}', 'web' => "\x{b6}"}, # Paragraph symbol. + '(middot|#183)' => {'tex' => '\267', 'web' => "\x{b7}"}, # middle dot + '(cedil|#184)' => {'tex' => '\233', 'web' => "\x{b8}"}, # 'naked' cedilla. + '(sup1|#185)' => {'tex' => '^1', 'web' => "\x{b9}"}, # superscript 1. + '(ordm|#186)' => {'tex' => '{\260}', 'web' => "\x{ba}"}, # masculine ordinal. + '(raquo|#187)', => {'tex' => '\273', 'web' => "\x{bb}"}, # Right angle quotes. + '(frac14|#188)' => {'tex' => '\274', 'web' => "\x{bc}"}, # 1/4. + '(frac12|#189)' => {'tex' => '\275', 'web' => "\x{bd}"}, # 1/2. + '(frac34|#190)' => {'tex' => '\276', 'web' => "\x{be}"}, # 3/4 + '(iquest|#191)' => {'tex' => '{/Text \277}', 'web' => "\x{bf}"}, # Inverted ? + '(Agrave|#192)' => {'tex' => '\300', 'web' => "\x{c0}"}, # A Grave. + '(Aacute|#193)' => {'tex' => '\301', 'web' => "\x{c1}"}, # A Acute. + '(Acirc|#194)' => {'tex' => '\302', 'web' => "\x{c2}"}, # A Circumflex. + '(Atilde|#195)' => {'tex' => '\303', 'web' => "\x{c3}"}, # A tilde. + '(Auml|#196)' => {'tex' => '\304', 'web' => "\x{c4}"}, # A umlaut. + '(Aring|#197)' => {'tex' => '\305', 'web' => "\x{c5}"}, # A ring. + '(AElig|#198)' => {'tex' => '\306', 'web' => "\x{c6}"}, # AE ligature. + '(Ccedil|#199)' => {'tex' => '\307', 'web' => "\x{c7}"}, # C cedilla + '(Egrave|#200)' => {'tex' => '\310', 'web' => "\x{c8}"}, # E Accent grave. + '(Eacute|#201)' => {'tex' => '\311', 'web' => "\x{c9}"}, # E acute accent. + '(Ecirc|#202)' => {'tex' => '\312', 'web' => "\x{ca}"}, # E Circumflex. + '(Euml|#203)' => {'tex' => '\313', 'web' => "\x{cb}"}, # E umlaut. + '(Igrave|#204)' => {'tex' => '\314', 'web' => "\x{cc}"}, # I grave accent. + '(Iacute|#205)' => {'tex' => '\315', 'web' => "\x{cd}"}, # I acute accent. + '(Icirc|#206)' => {'tex' => '\316', 'web' => "\x{ce}"}, # I circumflex. + '(Iuml|#207)' => {'tex' => '\317', 'web' => "\x{cf}"}, # I umlaut. + '(ETH|#208)' => {'tex' => '\320', 'web' => "\x{d0}"}, # Icelandic Cap eth. + '(Ntilde|#209)' => {'tex' => '\321', 'web' => "\x{d1}"}, # Ntilde (enyan). + '(Ograve|#210)' => {'tex' => '\322', 'web' => "\x{d2}"}, # O accent grave. + '(Oacute|#211)' => {'tex' => '\323', 'web' => "\x{d3}"}, # O accent acute. + '(Ocirc|#212)' => {'tex' => '\324', 'web' => "\x{d4}"}, # O circumflex. + '(Otilde|#213)' => {'tex' => '\325', 'web' => "\x{d5}"}, # O tilde. + '(Ouml|#214)' => {'tex' => '\326', 'web' => "\x{d6}"}, # O umlaut. + '(times|#215)' => {'tex' => '\327', 'web' => "\x{d7}"}, # Times symbol. + '(Oslash|#216)' => {'tex' => '\330', 'web' => "\x{d8}"}, # O slash. + '(Ugrave|#217)' => {'tex' => '\331', 'web' => "\x{d9}"}, # U accent grave. + '(Uacute|#218)' => {'tex' => '\332', 'web' => "\x{da}"}, # U accent acute. + '(Ucirc|#219)' => {'tex' => '\333', 'web' => "\x{db}"}, # U circumflex. + '(Uuml|#220)' => {'tex' => '\334', 'web' => "\x{dc}"}, # U umlaut. + '(Yacute|#221)' => {'tex' => '\335', 'web' => "\x{dd}"}, # Y accent acute. + '(THORN|#222)' => {'tex' => '\336', 'web' => "\x{de}"}, # Icelandic thorn. + '(szlig|#223)' => {'tex' => '\337', 'web' => "\x{df}"}, # German sharfes s. + '(agrave|#224)' => {'tex' => '\340', 'web' => "\x{e0}"}, # a accent grave. + '(aacute|#225)' => {'tex' => '\341', 'web' => "\x{e1}"}, # a grave. + '(acirc|#226)' => {'tex' => '\342', 'web' => "\x{e2}"}, # a circumflex. + '(atilde|#227)' => {'tex' => '\343', 'web' => "\x{e3}"}, # a tilde. + '(auml|#228)' => {'tex' => '\344', 'web' => "\x{e4}"}, # a umlaut + '(aring|#229)' => {'tex' => '\345', 'web' => "\x{e5}"}, # a ring on top. + '(aelig|#230)' => {'tex' => '\346', 'web' => "\x{e6}"}, # ae ligature. + '(ccedil|#231)' => {'tex' => '\347', 'web' => "\x{e7}"}, # C cedilla + '(egrave|#232)' => {'tex' => '\350', 'web' => "\x{e8}"}, # e accent grave. + '(eacute|#233)' => {'tex' => '\351', 'web' => "\x{e9}"}, # e accent acute. + '(ecirc|#234)' => {'tex' => '\352', 'web' => "\x{ea}" }, # e circumflex. + '(euml|#235)' => {'tex' => '\353', 'web' => "\x{eb}"}, # e umlaut. + '(igrave|#236)' => {'tex' => '\354', 'web' => "\x{ec}"}, # i grave. + '(iacute|#237)' => {'tex' => '\355', 'web' => "\x{ed}"}, # i acute. + '(icirc|#238)' => {'tex' => '\356', 'web' => "\x{ee}"}, # i circumflex. + '(iuml|#239)' => {'tex' => '\357', 'web' => "\x{ef}"}, # i umlaut. + '(eth|#240)' => {'tex' => '\360', 'web' => "\x{f0}"}, # Icelandic eth. + '(ntilde|#241)' => {'tex' => '\361', 'web' => "\x{f1}"}, # n tilde. + '(ograve|#242)' => {'tex' => '\362', 'web' => "\x{f2}"}, # o grave. + '(oacute|#243)' => {'tex' => '\363', 'web' => "\x{f3}"}, # o acute. + '(ocirc|#244)' => {'tex' => '\364', 'web' => "\x{f4}"}, # o circumflex. + '(otilde|#245)' => {'tex' => '\365', 'web' => "\x{f5}"}, # o tilde. + '(ouml|#246)' => {'tex' => '\366', 'web' => "\x{f6}"}, # o umlaut. + '(divide|#247)' => {'tex' => '\367', 'web' => "\x{f7}"}, # division symbol + '(oslash|#248)' => {'tex' => '\370', 'web' => "\x{f8}"}, # o slashed. + '(ugrave|#249)' => {'tex' => '\371', 'web' => "\x{f9}"}, # u accent grave. + '(uacute|#250)' => {'tex' => '\372', 'web' => "\x{fa}"}, # u acute. + '(ucirc|#251)' => {'tex' => '\373', 'web' => "\x{fb}"}, # u circumflex. + '(uuml|#252)' => {'tex' => '\374', 'web' => "\x{fc}"}, # u umlaut. + '(yacute|#253)' => {'tex' => '\375', 'web' => "\x{fd}"}, # y acute accent. + '(thorn|#254)' => {'tex' => '\376', 'web' => "\x{fe}"}, # small thorn (icelandic). + '(yuml|#255)' => {'tex' => '\377', 'web' => "\x{ff}"}, # y umlaut. + + # Latin extended A entities: + + '(OElig|#338)' => {'tex' => '{/Text \326}', 'web' => "\x{152}"}, # OE ligature. + '(oelig|#339)' => {'tex' => '{/Text \366}', 'web' => "\x{153}"}, # oe ligature. + '(Scaron|#352)' => {'tex' => 'S', 'web' => "\x{160}"}, # S caron no printable. + '(scaron|#353)' => {'tex' => 's', 'web' => "\x{161}"}, # s caron no printable. + '(Yuml|#376)' => {'tex' => 'Y', 'web' => "\x{178}"}, # Y umlaut - no printable. + + # Latin extended B. + + '(fnof|#402)' => {'tex' =>'{/Symbol \246}', 'web' => "\x{192}"}, # f with little hook. + + # Standalone accents: + + '(circ|#710)' => {'tex' => '^', 'web' => '^'}, # circumflex. + '(tilde|#732)' => {'tex' => '~', 'web' => '~'}, # tilde. + + # General punctuation. We're not able to make a distinction between + # the various length spacings in the print version. (e.g. en/em/thin). + # the various joiners will be empty strings in the print version too. + + + '(ensp|#8194)' => {'tex' => ' ', 'web' => "\x{2002}"}, # en space. + '(emsp|#8195)' => {'tex' => ' ', 'web' => "\x{2003}"}, # em space. + '(thinsp|#8201)' => {'tex' => ' ', 'web' => "\x{2009}"}, # thin space. + '(zwnj|#8204)' => {'tex' => ' ', 'web' => "\x{200c}"}, # Zero width non joiner. + '(zwj|#8205)' => {'tex' => ' ', 'web' => "\x{200d}"}, # Zero width joiner. + '(lrm|#8206)' => {'tex' => ' ', 'web' => "\x{200e}"}, # Left to right mark + '(rlm|#8207)' => {'tex' => ' ', 'web' => "\x{200f}"}, # right to left mark. + '(ndash|#8211)' => {'tex' => '{/Text \55}', 'web' => "\x{2013}"}, # en dash. + '(mdash|#8212)' => {'tex' => '{/Symbol \55}', 'web' => "\x{2014}"}, # em dash. + '(lsquo|#8216)' => {'tex' => '{/Text \140}', 'web' => "\x{2018}"}, # Left single quote. + '(rsquo|#8217)' => {'tex' => '\47', 'web' => "\x{2019}"}, # Right single quote. + '(sbquo|#8218)' => {'tex' => '\54', 'web' => "\x{201a}"}, # Single low-9 quote. + '(ldquo|#8220)' => {'tex' => '\42', 'web' => "\x{201c}"}, # Left double quote. + '(rdquo|#8221)' => {'tex' => '\42', 'web' => "\x{201d}"}, # Right double quote. + '(bdquo|#8222)' => {'tex' => ',', 'web' => "\x{201e}"}, # Double low-9 quote. + '(dagger|#8224)' => {'tex' => '+', 'web' => "\x{2020}"}, # Is this a dagger I see before me now? + '(Dagger|#8225)' => {'tex' => '\261', 'web' => "\x{2021}"}, # it's handle pointing towards my heart? + '(bull|#8226)' => {'tex' => '\267', 'web' => "\x{2022}"}, # Bullet. + '(hellep|#8230)' => {'tex' => '{/Symbol \274}', 'web' => "\x{2026}"}, # Ellipses. + '(permil|#8240)' => {'tex' => '%_o', 'web' => "\x{2031}"}, # Per mille. + '(prime|#8242)' => {'tex' => '\264', 'web' => "\x{2032}"}, # Prime. + '(Prime|#8243)' => {'tex' => '{/Symbol \262}', 'web' => "\x{2033}"}, # double prime. + '(lsaquo|#8249)' => {'tex' => '<', 'web' => "\x{2039}"}, # < quote. + '(rsaquo|#8250)' => {'tex' => '\74', 'web' => "\x{203a}"}, # > quote. + '(oline|#8254)' => {'tex' => '{/Symbol \140}', 'web' => "\x{203e}"}, # Overline. + '(frasl|#8260)' => {'tex' => '/', 'web' => "\x{2044}"}, # Fraction slash. + '(euro|#8364)' => {'tex' => '{/Symbol \240}', 'web' => "\x{20ac}"}, # Euro currency. + + # Letter like symbols. + + '(weierp|#8472)' => {'tex' => '{/Symbol \303}', 'web' => "\x{2118}"}, # Power set symbol + '(image|#8465)' => {'tex' => '{/Symbol \301}', 'web' => "\x{2111}"}, # Imaginary part + '(real|#8476)' => {'tex' => '{/Symbol \302}', 'web' => "\x{211c}"}, # Real part. + '(trade|#8482)' => {'tex' => '{/Symbol \344}', 'web' => "\x{2122}"}, # trademark symbol. + '(alefsym|#8501)' => {'tex' => '{/Symbol \300}', 'web' => "\x{2135}"}, # Hebrew alef. + + # Arrows of various types and directions. + '(larr|#8592)' => {'tex' => '{/Symbol \254}', 'web' => "\x{2190}"}, # <-- + '(uarr|#8593)' => {'tex' => '{/Symbol \255}', 'web' => "\x{2191}"}, # up arrow. + '(rarr|#8594)' => {'tex' => '{/Symbol \256}', 'web' => "\x{2192}"}, # --> + '(darr|#8595)' => {'tex' => '{/Symbol \257}', 'web' => "\x{2193}"}, # down arrow. + '(harr|#8596)' => {'tex' => '{/Symbol \253}', 'web' => "\x{2194}"}, # <--> + '(crarr|#8629)' => {'tex' => '{/Symbol \277}', 'web' => "\x{21b5}"}, # corner arrow down and right. + '(lArr|#8656)' => {'tex' => '{/Symbol \334}', 'web' => "\x{21d0}"}, # <== + '(uArr|#8657)' => {'tex' => '{/Symbol \335}', 'web' => "\x{21d1}"}, # Up double arrow. + '(rArr|#8658)' => {'tex' => '{/Symbol \336}', 'web' => "\x{21d2}"}, # ==> + '(dArr|#8659)' => {'tex' => '{/Symbol \337}', 'web' => "\x{21d3}"}, # Down double arrow. + '(hArr|#8660)' => {'tex' => '{/Symbol \333}', 'web' => "\x{21d4}"}, # <==> + + # Mathematical operators. For some of these we do the best we can in printing. + + '(forall|#8704)' => {'tex' => '{/Symbol \42}', 'web' => "\x{2200}"}, # For all. + '(part|#8706)' => {'tex' => '{/Symbol d}', 'web' => "\x{2202}"}, # partial derivative + '(exist|#8707)' => {'tex' => '{/Symbol \44}', 'web' => "\x{2203}"}, # There exists. + '(empty|#8709)' => {'tex' => '{/Symbol \306}', 'web' => "\x{2205}"}, # Null set. + '(nabla|#8711)' => {'tex' => '{/Symbol \321}', 'web' => "\x{2207}"}, # Gradient e.g. + '(isin|#8712)' => {'tex' => '{/Symbol \316}', 'web' => "\x{2208}"}, # Element of the set. + '(notin|#8713)' => {'tex' => '{/Symbol \317}', 'web' => "\x{2209}"}, # Not an element of + '(ni|#8715)' => {'tex' => '{/Symbol \47}', 'web' => "\x{220b}"}, # Contains as a member + '(prod|#8719)' => {'tex' => '{/Symbol \325}', 'web' => "\x{220f}"}, # Product + '(sum|#8721)' => {'tex' => '{/Symbol \345}', 'web' => "\x{2211}"}, # Sum of. + '(minus|#8722)' => {'tex' => '{/Symbol \55}', 'web' => "\x{2212}"}, # - sign. + '(lowast|#8727)' => {'tex' => '*', 'web' => "\x{2217}"}, # * + '(radic|#8730)' => {'tex' => '{/Symbol \326}', 'web' => "\x{221a}"}, # Square root. + '(prop|#8733)' => {'tex' => '{/Symbol \265}', 'web' => "\x{221d}"}, # Proportional to. + '(infin|#8734)' => {'tex' => '{/Symbol \245}', 'web' => "\x{221e}"}, # Infinity. + '(ang|#8736)' => {'tex' => '{/Symbol \320}', 'web' => "\x{2220}"}, # Angle . + '(and|#8743)' => {'tex' => '{/Symbol \331}', 'web' => "\x{2227}"}, # Logical and. + '(or|#8744)' => {'tex' => '{/Symbol \332}', 'web' => "\x{2228}"}, # Logical or. + '(cap|#8745)' => {'tex' => '{/Symbol \307}', 'web' => "\x{2229}"}, # Set intersection. + '(cup|#8746)' => {'tex' => '{/Symbol \310}', 'web' => "\x{222a}"}, # Set union. + '(int|8747)' => {'tex' => '{/Symbol \362}', 'web' => "\x{222b}"}, # Integral. + + # Some gnuplot guru will have to explain to me why the next three + # require the extra slashes... else they print very funkily. + + '(there4|#8756)' => {'tex' => '{/Symbol \\\134}', 'web' => "\x{2234}"}, # Therefore triple dots. + '(sim|#8764)' => {'tex' => '\\\176', 'web' => "\x{223c}"}, # Simlar to. + '(cong|#8773)' => {'tex' => '{/Symbol \\\100}','web' => "\x{2245}"}, # Congruent to/with. + + '(asymp|#8776)' => {'tex' => '{/Symbol \273}', 'web' => "\x{2248}"}, # Asymptotic to. + '(ne|#8800)' => {'tex' => '{/Symbol \271}', 'web' => "\x{2260}"}, # not equal to. + '(equiv|#8801)' => {'tex' => '{/Symbol \272}', 'web' => "\x{2261}"}, # Equivalent to. + '(le|8804)' => {'tex' => '{/Symbol \243}', 'web' => "\x{2264}"}, # Less than or equal to. + '(ge|8805)' => {'tex' => '{/Symbol \263}', 'web' => "\x{2265}"}, # Greater than or equal to + '(sub|8834)' => {'tex' => '{/Symbol \314}', 'web' => "\x{2282}"}, # Subset of. + '(sup|8835)' => {'tex' => '{/Symbol \311}', 'web' => "\x{2283}"}, # Super set of. + '(nsub|8836)' => {'tex' => '{/Symbol \313}', 'web' => "\x{2284}"}, # not subset of. + '(sube|8838)' => {'tex' => '{/Symbol \315}', 'web' => "\x{2286}"}, # Subset or equal. + '(supe|8839)' => {'tex' => '{/Symbol \312}', 'web' => "\x{2287}"}, # Superset or equal + '(oplus|8853)' => {'tex' => '{/Symbol \305}', 'web' => "\x{2295}"}, # O with plus inside + '(otimes|8855)' => {'tex' => '{/Symbol \304}', 'web' => "\x{2297}"}, # O with times. + '(perp|8869)' => {'tex' => '{/Symbol \136}', 'web' => "\x{22a5}"}, # Perpendicular. + '(sdot|8901)' => {'tex' => '{/Symbol \227}', 'web' => "\x{22c5}"}, # Dot operator. + + # Misc. technical symbols: + + '(lceil|8698)' => {'tex' => '{/Symbol \351}', 'web' => "\x{2308}"}, # Left ceiling. + '(rceil|8969)' => {'tex' => '{/Symbol \371}', 'web' => "\x{2309}"}, # Right ceiling. + '(lfloor|8970)' => {'tex' => '{/Symbol \353}', 'web' => "\x{230a}"}, # Left floor. + '(rfloor|8971)' => {'tex' => '{/Symbol \373}', 'web' => "\x{230b}"}, # Right floor. + + # The gnuplot png font evidently does not have the big angle brackets at + # positions 0x2329, 0x232a so use ordinary brackets. + + '(lang|9001)' => {'tex' => '{/Symbol \341}', 'web' => '<'}, # Left angle bracket. + '(rang|9002)' => {'tex' => '{/Symbol \361}', 'web' => '>'}, # Right angle bracket. + + # Gemoetric shapes. + + '(loz|9674)' => {'tex' => '{/Symbol \340}', 'web' => "\x{25ca}"}, # Lozenge. + + # Misc. symbols + + '(spades|9824)' => {'tex' => '{/Symbol \252}', 'web' => "\x{2660}"}, + '(clubs|9827)' => {'tex' => '{/Symbol \247}', 'web' => "\x{2663}"}, + '(hearts|9829)' => {'tex' => '{/Symbol \251}', 'web' => "\x{2665}"}, + '(diams|9830)' => {'tex' => '{/Symbol \250}', 'web' => "\x{2666}"} + + ); + + +sub replace_entities { + my ($target,$text) = @_; + $text =~ s{([_^~\{\}]|\\\\)}{\\\\$1}g; + while (my ($re, $replace) = each(%lookup)) { + my $repl = $replace->{$target}; + $text =~ s/&$re;/$replace->{$target}/g; + } + $text =~ s{(&)}{\\\\$1}g; + return $text; +} + ##------------------------------------------------------------------- title sub start_title { my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; my $result=''; if ($target eq 'web' || $target eq 'tex') { - $title = &Apache::lonxml::get_all_text("/title",$$parser[-1]); + $title = &Apache::lonxml::get_all_text("/title",$parser,$style); $title=&Apache::run::evaluate($title,$safeeval,$$parstack[-1]); $title =~ s/\n/ /g; if (length($title) > $max_str_len) { $title = substr($title,0,$max_str_len); } + $title = &parse_label($target,$title); } elsif ($target eq 'edit') { $result.=&Apache::edit::tag_start($target,$token,'Plot Title'); - my $text=&Apache::lonxml::get_all_text("/title",$$parser[-1]); - $result.=&Apache::edit::end_row(). - &Apache::edit::start_spanning_row(). - &Apache::edit::editline('',$text,'',60); + my $text=&Apache::lonxml::get_all_text("/title",$parser,$style); + $result.=&Apache::edit::editline('',$text,'',60); } elsif ($target eq 'modified') { - my $text=$$parser[-1]->get_text("/title"); $result.=&Apache::edit::rebuild_tag($token); - $result.=&Apache::edit::modifiedfield($token); + $result.=&Apache::edit::modifiedfield("/title",$parser); } return $result; } @@ -640,22 +1243,20 @@ sub start_xlabel { my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; my $result=''; if ($target eq 'web' || $target eq 'tex') { - $xlabel = &Apache::lonxml::get_all_text("/xlabel",$$parser[-1]); + $xlabel = &Apache::lonxml::get_all_text("/xlabel",$parser,$style); $xlabel=&Apache::run::evaluate($xlabel,$safeeval,$$parstack[-1]); $xlabel =~ s/\n/ /g; if (length($xlabel) > $max_str_len) { $xlabel = substr($xlabel,0,$max_str_len); } + $xlabel = &parse_label($target,$xlabel); } elsif ($target eq 'edit') { $result.=&Apache::edit::tag_start($target,$token,'Plot Xlabel'); - my $text=&Apache::lonxml::get_all_text("/xlabel",$$parser[-1]); - $result.=&Apache::edit::end_row(). - &Apache::edit::start_spanning_row(). - &Apache::edit::editline('',$text,'',60); + my $text=&Apache::lonxml::get_all_text("/xlabel",$parser,$style); + $result.=&Apache::edit::editline('',$text,'',60); } elsif ($target eq 'modified') { - my $text=$$parser[-1]->get_text("/xlabel"); $result.=&Apache::edit::rebuild_tag($token); - $result.=&Apache::edit::modifiedfield($token); + $result.=&Apache::edit::modifiedfield("/xlabel",$parser); } return $result; } @@ -675,22 +1276,20 @@ sub start_ylabel { my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; my $result=''; if ($target eq 'web' || $target eq 'tex') { - $ylabel = &Apache::lonxml::get_all_text("/ylabel",$$parser[-1]); + $ylabel = &Apache::lonxml::get_all_text("/ylabel",$parser,$style); $ylabel = &Apache::run::evaluate($ylabel,$safeeval,$$parstack[-1]); $ylabel =~ s/\n/ /g; if (length($ylabel) > $max_str_len) { $ylabel = substr($ylabel,0,$max_str_len); } + $ylabel = &parse_label($target,$ylabel); } elsif ($target eq 'edit') { $result .= &Apache::edit::tag_start($target,$token,'Plot Ylabel'); - my $text = &Apache::lonxml::get_all_text("/ylabel",$$parser[-1]); - $result .= &Apache::edit::end_row(). - &Apache::edit::start_spanning_row(). - &Apache::edit::editline('',$text,'',60); + my $text = &Apache::lonxml::get_all_text("/ylabel",$parser,$style); + $result .= &Apache::edit::editline('',$text,'',60); } elsif ($target eq 'modified') { - my $text=$$parser[-1]->get_text("/ylabel"); $result.=&Apache::edit::rebuild_tag($token); - $result.=&Apache::edit::modifiedfield($token); + $result.=&Apache::edit::modifiedfield("/ylabel",$parser); } return $result; } @@ -713,16 +1312,16 @@ sub start_label { my %label; &get_attributes(\%label,\%label_defaults,$parstack,$safeeval, $tagstack->[-1]); - my $text = &Apache::lonxml::get_all_text("/label",$$parser[-1]); + my $text = &Apache::lonxml::get_all_text("/label",$parser,$style); $text = &Apache::run::evaluate($text,$safeeval,$$parstack[-1]); $text =~ s/\n/ /g; $text = substr($text,0,$max_str_len) if (length($text) > $max_str_len); - $label{'text'} = $text; + $label{'text'} = &parse_label($target,$text); push(@labels,\%label); } elsif ($target eq 'edit') { $result .= &Apache::edit::tag_start($target,$token,'Plot Label'); $result .= &edit_attributes($target,$token,\%label_defaults); - my $text = &Apache::lonxml::get_all_text("/label",$$parser[-1]); + my $text = &Apache::lonxml::get_all_text("/label",$parser,$style); $result .= &Apache::edit::end_row(). &Apache::edit::start_spanning_row(). &Apache::edit::editline('',$text,'',60); @@ -730,8 +1329,7 @@ sub start_label { &Apache::edit::get_new_args ($token,$parstack,$safeeval,keys(%label_defaults)); $result.=&Apache::edit::rebuild_tag($token); - my $text=$$parser[-1]->get_text("/label"); - $result.=&Apache::edit::modifiedfield($token); + $result.=&Apache::edit::modifiedfield("/label",$parser); } return $result; } @@ -759,15 +1357,23 @@ sub start_curve { push (@curves,\%curve); } elsif ($target eq 'edit') { $result .= &Apache::edit::tag_start($target,$token,'Curve'); - $result .= &help_win($curve_help_text); $result .= &edit_attributes($target,$token,\%curve_defaults, - \@curve_edit_order); + \@curve_edit_order) + .&Apache::edit::end_row() + .&Apache::edit::start_spanning_row(); + } elsif ($target eq 'modified') { my $constructtag=&Apache::edit::get_new_args ($token,$parstack,$safeeval,keys(%curve_defaults)); if ($constructtag) { + # + # Fix up the color attribute as jcolor does not prepend an x + # + my $value = $token->[2]{'color'}; + if (defined $value && !($value =~ /^x/)) { + $token->[2]{'color'} = 'x' . $value; + } $result = &Apache::edit::rebuild_tag($token); - $result.= &Apache::edit::handle_insert(); } } return $result; @@ -791,22 +1397,25 @@ sub start_function { my $result=''; if ($target eq 'web' || $target eq 'tex') { if (exists($curves[-1]->{'data'})) { - &Apache::lonxml::warning('Use of precludes use of . The will be omitted in favor of the declaration.'); + &Apache::lonxml::warning + ('Use of the curve function tag precludes use of '. + ' the curve data tag. '. + 'The curve data tag will be omitted in favor of the '. + 'curve function declaration.'); delete $curves[-1]->{'data'} ; } - my $function = &Apache::lonxml::get_all_text("/function",$$parser[-1]); + my $function = &Apache::lonxml::get_all_text("/function",$parser, + $style); $function = &Apache::run::evaluate($function,$safeeval,$$parstack[-1]); + $function=~s/\^/\*\*/gs; $curves[-1]->{'function'} = $function; } elsif ($target eq 'edit') { $result .= &Apache::edit::tag_start($target,$token,'Gnuplot compatible curve function'); - my $text = &Apache::lonxml::get_all_text("/function",$$parser[-1]); - $result .= &Apache::edit::end_row(). - &Apache::edit::start_spanning_row(). - &Apache::edit::editline('',$text,'',60); + my $text = &Apache::lonxml::get_all_text("/function",$parser,$style); + $result .= &Apache::edit::editline('',$text,'',60); } elsif ($target eq 'modified') { $result.=&Apache::edit::rebuild_tag($token); - my $text=$$parser[-1]->get_text("/function"); - $result.=&Apache::edit::modifiedfield($token); + $result.=&Apache::edit::modifiedfield("/function",$parser); } return $result; } @@ -827,12 +1436,14 @@ sub start_data { my $result=''; if ($target eq 'web' || $target eq 'tex') { if (exists($curves[-1]->{'function'})) { - &Apache::lonxml::warning('Use of precludes use of .'. - '. The will be omitted in favor of '. - 'the declaration.'); + &Apache::lonxml::warning + ('Use of the curve function tag precludes use of '. + ' the curve data tag. '. + 'The curve function tag will be omitted in favor of the '. + 'curve data declaration.'); delete($curves[-1]->{'function'}); } - my $datatext = &Apache::lonxml::get_all_text("/data",$$parser[-1]); + my $datatext = &Apache::lonxml::get_all_text("/data",$parser,$style); $datatext=&Apache::run::evaluate($datatext,$safeeval,$$parstack[-1]); # Deal with cases where we're given an array... if ($datatext =~ /^\@/) { @@ -846,28 +1457,28 @@ sub start_data { my @data; if ($datatext =~ /,/) { # comma deliminated @data = split /,/,$datatext; - } else { # Assume it's space seperated. + } else { # Assume it's space separated. @data = split / /,$datatext; } for (my $i=0;$i<=$#data;$i++) { # Check that it's non-empty if (! defined($data[$i])) { &Apache::lonxml::warning( - 'undefined value. Replacing with '. + 'undefined curve data value. Replacing with '. ' pi/e = 1.15572734979092'); $data[$i] = 1.15572734979092; } # Check that it's a number if (! &$real_test($data[$i]) & ! &$int_test($data[$i])) { &Apache::lonxml::warning( - 'Bad value of '.$data[$i].' Replacing with '. + 'Bad curve data value of '.$data[$i].' Replacing with '. ' pi/e = 1.15572734979092'); $data[$i] = 1.15572734979092; } } # complain if the number of data points is not the same as # in previous sets of data. - if (($curves[-1]->{'data'}) && ($#data != $#{@{$curves[-1]->{'data'}->[0]}})){ + if (($curves[-1]->{'data'}) && ($#data != $#{$curves[-1]->{'data'}->[0]})){ &Apache::lonxml::warning ('Number of data points is not consistent with previous '. 'number of data points'); @@ -875,14 +1486,11 @@ sub start_data { push @{$curves[-1]->{'data'}},\@data; } elsif ($target eq 'edit') { $result .= &Apache::edit::tag_start($target,$token,'Comma or space deliminated curve data'); - my $text = &Apache::lonxml::get_all_text("/data",$$parser[-1]); - $result .= &Apache::edit::end_row(). - &Apache::edit::start_spanning_row(). - &Apache::edit::editline('',$text,'',60); + my $text = &Apache::lonxml::get_all_text("/data",$parser,$style); + $result .= &Apache::edit::editline('',$text,'',60); } elsif ($target eq 'modified') { $result.=&Apache::edit::rebuild_tag($token); - my $text=$$parser[-1]->get_text("/data"); - $result.=&Apache::edit::modifiedfield($token); + $result.=&Apache::edit::modifiedfield("/data",$parser); } return $result; } @@ -911,7 +1519,17 @@ sub start_axis { } elsif ($target eq 'modified') { my $constructtag=&Apache::edit::get_new_args ($token,$parstack,$safeeval,keys(%axis_defaults)); + if ($constructtag) { + # + # Fix up the color attribute since jchooser does not + # prepend an x to the color: + # + my $value = $token->[2]{'color'}; + if (defined $value && !($value =~ /^x/)) { + $token->[2]{'color'} = 'x' . $value; + } + $result = &Apache::edit::rebuild_tag($token); } } @@ -948,8 +1566,13 @@ sub set_defaults { sub get_attributes{ my ($values,$defaults,$parstack,$safeeval,$tag) = @_; foreach my $attr (keys(%{$defaults})) { - $values->{$attr} = - &Apache::lonxml::get_param($attr,$parstack,$safeeval); + if ($attr eq 'texwidth' || $attr eq 'texfont') { + $values->{$attr} = + &Apache::lonxml::get_param($attr,$parstack,$safeeval,undef,1); + } else { + $values->{$attr} = + &Apache::lonxml::get_param($attr,$parstack,$safeeval); + } if ($values->{$attr} eq '' | !defined($values->{$attr})) { $values->{$attr} = $defaults->{$attr}->{'default'}; next; @@ -968,62 +1591,219 @@ sub get_attributes{ ##------------------------------------------------------- write_gnuplot_file sub write_gnuplot_file { my ($tmpdir,$filename,$target)= @_; + my ($fontsize, $font_properties) = &get_font($target); my $gnuplot_input = ''; my $curve; + # + # Check to be sure we do not have any empty curves + my @curvescopy; + foreach my $curve (@curves) { + if (exists($curve->{'function'})) { + if ($curve->{'function'} !~ /^\s*$/) { + push(@curvescopy,$curve); + } + } elsif (exists($curve->{'data'})) { + foreach my $data (@{$curve->{'data'}}) { + if (scalar(@$data) > 0) { + push(@curvescopy,$curve); + last; + } + } + } + } + @curves = @curvescopy; # Collect all the colors my @Colors; - push @Colors, $plot{'bgcolor'}; - push @Colors, $plot{'fgcolor'}; - push @Colors, (defined($axis{'color'})?$axis{'color'}:$plot{'fgcolor'}); + push @Colors, $Apache::lonplot::plot{'bgcolor'}; + push @Colors, $Apache::lonplot::plot{'fgcolor'}; + push @Colors, (defined($axis{'color'})?$axis{'color'}:$Apache::lonplot::plot{'fgcolor'}); foreach $curve (@curves) { push @Colors, ($curve->{'color'} ne '' ? $curve->{'color'} : - $plot{'fgcolor'} ); + $Apache::lonplot::plot{'fgcolor'} ); } + # set term if ($target eq 'web') { - $gnuplot_input .= 'set term gif '; - $gnuplot_input .= 'transparent ' if ($plot{'transparent'} eq 'on'); - $gnuplot_input .= $plot{'font'} . ' '; - $gnuplot_input .= 'size '.$plot{'width'}.','.$plot{'height'}.' '; + $gnuplot_input .= 'set terminal png enhanced nocrop '; + $gnuplot_input .= 'transparent ' if ($Apache::lonplot::plot{'transparent'} eq 'on'); + $gnuplot_input .= 'font "'.$Apache::lonnet::perlvar{'lonFontsDir'}. + '/'.$font_properties->{'file'}.'.ttf" '; + $gnuplot_input .= $fontsize; + $gnuplot_input .= ' size '.$Apache::lonplot::plot{'width'}.','.$Apache::lonplot::plot{'height'}.' '; $gnuplot_input .= "@Colors\n"; # set output $gnuplot_input .= "set output\n"; } elsif ($target eq 'tex') { - $gnuplot_input .= "set term postscript eps monochrome solid\n"; - $gnuplot_input .= "set output \"/home/httpd/perl/tmp/". - &Apache::lonnet::unescape($filename).".eps\"\n"; + $gnuplot_input .= "set term postscript eps enhanced $Apache::lonplot::plot{'plotcolor'} dash "; + if (!$font_properties->{'tex_no_file'}) { + $gnuplot_input .= + 'fontfile "'.$Apache::lonnet::perlvar{'lonFontsDir'}. + '/'.$font_properties->{'file'}.'.pfb" '; + } + $gnuplot_input .= ' "'.$font_properties->{'printname'}.'" '; + $gnuplot_input .= $fontsize; + $gnuplot_input .= "\nset output \"".$tmpdir. + &unescape($filename).".eps\"\n"; + $gnuplot_input .= "set encoding iso_8859_1\n"; # Get access to extended font. + + } + # cartesian or polar plot? + if (lc($Apache::lonplot::plot{'plottype'}) eq 'polar') { + $gnuplot_input .= 'set polar'.$/; + } else { + # Assume Cartesian + } + # cartesian or polar grid? + if (lc($Apache::lonplot::plot{'gridtype'}) eq 'polar') { + $gnuplot_input .= 'set grid polar'.$/; + } elsif (lc($Apache::lonplot::plot{'gridtype'}) eq 'linear-log') { + $gnuplot_input .= 'set logscale x'.$/; + } elsif (lc($Apache::lonplot::plot{'gridtype'}) eq 'log-linear') { + $gnuplot_input .= 'set logscale y'.$/; + } elsif (lc($Apache::lonplot::plot{'gridtype'}) eq 'log-log') { + $gnuplot_input .= 'set logscale x'.$/; + $gnuplot_input .= 'set logscale y'.$/; + } else { + # Assume Cartesian + } + # solid or pattern for boxes? + if (lc($Apache::lonplot::plot{'fillstyle'}) eq 'solid') { + $gnuplot_input .= 'set style fill solid '. + $Apache::lonplot::plot{'solid'}.$Apache::lonplot::plot{'box_border'}.$/; + } elsif (lc($Apache::lonplot::plot{'fillstyle'}) eq 'pattern') { + $gnuplot_input .= 'set style fill pattern '.$Apache::lonplot::plot{'pattern'}.$Apache::lonplot::plot{'box_border'}.$/; + } elsif (lc($Apache::lonplot::plot{'fillstyle'}) eq 'empty') { + } + # margin + if (lc($Apache::lonplot::plot{'lmargin'}) ne 'default') { + $gnuplot_input .= 'set lmargin '.$Apache::lonplot::plot{'lmargin'}.$/; + } + if (lc($Apache::lonplot::plot{'rmargin'}) ne 'default') { + $gnuplot_input .= 'set rmargin '.$Apache::lonplot::plot{'rmargin'}.$/; + } + if (lc($Apache::lonplot::plot{'tmargin'}) ne 'default') { + $gnuplot_input .= 'set tmargin '.$Apache::lonplot::plot{'tmargin'}.$/; + } + if (lc($Apache::lonplot::plot{'bmargin'}) ne 'default') { + $gnuplot_input .= 'set bmargin '.$Apache::lonplot::plot{'bmargin'}.$/; + } + + # tic scales + if ($version > 4) { + $gnuplot_input .= 'set tics scale '. + $Apache::lonplot::plot{'major_ticscale'}.', '.$Apache::lonplot::plot{'minor_ticscale'}.$/; + } else { + $gnuplot_input .= 'set ticscale '. + $Apache::lonplot::plot{'major_ticscale'}.' '.$Apache::lonplot::plot{'minor_ticscale'}.$/; } + #boxwidth + if (lc($Apache::lonplot::plot{'boxwidth'}) ne '') { + $gnuplot_input .= 'set boxwidth '.$Apache::lonplot::plot{'boxwidth'}.$/; + } + # gridlayer + $gnuplot_input .= 'set grid noxtics noytics front '.$/ + if ($Apache::lonplot::plot{'gridlayer'} eq 'on'); + # grid - $gnuplot_input .= 'set grid'.$/ if ($plot{'grid'} eq 'on'); + $gnuplot_input .= 'set grid'.$/ if ($Apache::lonplot::plot{'grid'} eq 'on'); # border - $gnuplot_input .= ($plot{'border'} eq 'on'? + $gnuplot_input .= ($Apache::lonplot::plot{'border'} eq 'on'? 'set border'.$/ : 'set noborder'.$/ ); + # sampling rate for non-data curves + $gnuplot_input .= "set samples $Apache::lonplot::plot{'samples'}\n"; # title, xlabel, ylabel # titles - $gnuplot_input .= "set title \"$title\"\n" if (defined($title)) ; - $gnuplot_input .= "set xlabel \"$xlabel\"\n" if (defined($xlabel)); - $gnuplot_input .= "set ylabel \"$ylabel\"\n" if (defined($ylabel)); + my $extra_space_x = ($xtics{'location'} eq 'axis') ? ' 0, -0.5 ' : ''; + my $extra_space_y = ($ytics{'location'} eq 'axis') ? ' -0.5, 0 ' : ''; + + if ($target eq 'tex') { + $gnuplot_input .= "set title \"$title\" font \"".$font_properties->{'printname'}.",".$fontsize."pt\"\n" if (defined($title)) ; + $gnuplot_input .= "set xlabel \"$xlabel\" $extra_space_x font \"".$font_properties->{'printname'}.",".$fontsize."pt\"\n" if (defined($xlabel)); + $gnuplot_input .= "set ylabel \"$ylabel\" $extra_space_y font \"".$font_properties->{'printname'}.",".$fontsize."pt\"\n" if (defined($ylabel)); + } else { + $gnuplot_input .= "set title \"$title\" \n" if (defined($title)) ; + $gnuplot_input .= "set xlabel \"$xlabel\" $extra_space_x \n" if (defined($xlabel)); + $gnuplot_input .= "set ylabel \"$ylabel\" $extra_space_y \n" if (defined($ylabel)); + } # tics if (%xtics) { $gnuplot_input .= "set xtics $xtics{'location'} "; $gnuplot_input .= ( $xtics{'mirror'} eq 'on'?"mirror ":"nomirror "); $gnuplot_input .= "$xtics{'start'}, "; $gnuplot_input .= "$xtics{'increment'}, "; - $gnuplot_input .= "$xtics{'end'}\n"; + $gnuplot_input .= "$xtics{'end'} "; + if ($target eq 'tex') { + $gnuplot_input .= 'font "Helvetica,22"'; # Needed in iso 8859-1 enc. + } + $gnuplot_input .= "\n"; + if ($xtics{'minorfreq'} != 0) { + $gnuplot_input .= "set mxtics ".$xtics{'minorfreq'}."\n"; + } + } else { + if ($target eq 'tex') { + $gnuplot_input .= 'set xtics font "Helvetica,22"'."\n"; # needed in iso 8859-1 enc + } } if (%ytics) { $gnuplot_input .= "set ytics $ytics{'location'} "; $gnuplot_input .= ( $ytics{'mirror'} eq 'on'?"mirror ":"nomirror "); $gnuplot_input .= "$ytics{'start'}, "; $gnuplot_input .= "$ytics{'increment'}, "; - $gnuplot_input .= "$ytics{'end'}\n"; + $gnuplot_input .= "$ytics{'end'} "; + if ($target eq 'tex') { + $gnuplot_input .= 'font "Helvetica,22"'; # Needed in iso-8859-1 encoding. + } + $gnuplot_input .= "\n"; + if ($ytics{'minorfreq'} != 0) { + $gnuplot_input .= "set mytics ".$ytics{'minorfreq'}."\n"; + } + } else { + if ($target eq 'tex') { + $gnuplot_input .= 'set ytics font "Helvetica,22"'."\n"; # Needed for iso 8859-1 enc. + } } # axis if (%axis) { + if ($axis{'xformat'} ne 'on') { + $gnuplot_input .= "set format x "; + if ($axis{'xformat'} eq 'off') { + $gnuplot_input .= "\"\"\n"; + } else { + $gnuplot_input .= "\"\%.".$axis{'xformat'}."\"\n"; + } + } + if ($axis{'yformat'} ne 'on') { + $gnuplot_input .= "set format y "; + if ($axis{'yformat'} eq 'off') { + $gnuplot_input .= "\"\"\n"; + } else { + $gnuplot_input .= "\"\%.".$axis{'yformat'}."\"\n"; + } + } $gnuplot_input .= "set xrange \[$axis{'xmin'}:$axis{'xmax'}\]\n"; $gnuplot_input .= "set yrange \[$axis{'ymin'}:$axis{'ymax'}\]\n"; + if ($axis{'xzero'} ne 'off') { + $gnuplot_input .= "set xzeroaxis "; + if ($axis{'xzero'} eq 'line' || $axis{'xzero'} eq 'thick-line') { + $gnuplot_input .= "lt -1 "; + if ($axis{'xzero'} eq 'thick-line') { + $gnuplot_input .= "lw 3 "; + } + } + $gnuplot_input .= "\n"; + } + if ($axis{'yzero'} ne 'off') { + $gnuplot_input .= "set yzeroaxis "; + if ($axis{'yzero'} eq 'line' || $axis{'yzero'} eq 'thick-line') { + $gnuplot_input .= "lt -1 "; + if ($axis{'yzero'} eq 'thick-line') { + $gnuplot_input .= "lw 3 "; + } + } + $gnuplot_input .= "\n"; + } } # Key if (%key) { @@ -1039,32 +1819,47 @@ sub write_gnuplot_file { my $label; foreach $label (@labels) { $gnuplot_input .= 'set label "'.$label->{'text'}.'" at '. - $label->{'xpos'}.','.$label->{'ypos'}.' '.$label->{'justify'}.$/ ; + $label->{'xpos'}.','.$label->{'ypos'}; + if ($label->{'rotate'} ne '') { + $gnuplot_input .= ' rotate by '.$label->{'rotate'}; + } + $gnuplot_input .= ' '.$label->{'justify'}; + + if ($target eq 'tex') { + $gnuplot_input .=' font "'.$font_properties->{'printname'}.','.$fontsize.'pt"' ; + } + $gnuplot_input .= $/; } if ($target eq 'tex') { - $gnuplot_input .="set size 1,".$plot{'height'}/$plot{'width'}*1.36; + $gnuplot_input .="set size 1,".$Apache::lonplot::plot{'height'}/$Apache::lonplot::plot{'width'}*1.38; $gnuplot_input .="\n"; - } + } # curves - $gnuplot_input .= 'plot '; + # + # Each curve will have its very own linestyle. + # (This should work just fine in web rendition I think). + # The line_xxx variables will hold the elements of the line style. + # type (solid/dashed), color, width + # + my $linestyle_index = 50; + my $line_type = ''; + my $line_color = ''; + my $line_width = ''; + + my $plot_command; + my $plot_type; + for (my $i = 0;$i<=$#curves;$i++) { $curve = $curves[$i]; - $gnuplot_input.= ', ' if ($i > 0); + $plot_command.= ', ' if ($i > 0); + if ($target eq 'tex') { + $curve->{'linewidth'} *= 2; + } if (exists($curve->{'function'})) { - $gnuplot_input.= + $plot_type = $curve->{'function'}.' title "'. $curve->{'name'}.'" with '. $curve->{'linestyle'}; - $gnuplot_input.= ' linewidth 4 ' if ($target eq 'tex'); - if (($curve->{'linestyle'} eq 'points') || - ($curve->{'linestyle'} eq 'linespoints') || - ($curve->{'linestyle'} eq 'errorbars') || - ($curve->{'linestyle'} eq 'xerrorbars') || - ($curve->{'linestyle'} eq 'yerrorbars') || - ($curve->{'linestyle'} eq 'xyerrorbars')) { - $gnuplot_input.=' pointtype '.$curve->{'pointtype'}; - $gnuplot_input.=' pointsize '.$curve->{'pointsize'}; - } } elsif (exists($curve->{'data'})) { # Store data values in $datatext my $datatext = ''; @@ -1083,25 +1878,37 @@ sub write_gnuplot_file { } # write file print $fh $datatext; - close ($fh); + close($fh); # generate gnuplot text - $gnuplot_input.= '"'.$datafilename.'" title "'. + $plot_type = '"'.$datafilename.'" title "'. $curve->{'name'}.'" with '. $curve->{'linestyle'}; - $gnuplot_input.= ' linewidth 4 ' if ($target eq 'tex'); - if (($curve->{'linestyle'} eq 'points') || - ($curve->{'linestyle'} eq 'linespoints') || - ($curve->{'linestyle'} eq 'errorbars') || - ($curve->{'linestyle'} eq 'xerrorbars') || - ($curve->{'linestyle'} eq 'yerrorbars') || - ($curve->{'linestyle'} eq 'xyerrorbars')) { - $gnuplot_input.=' pointtype '.$curve->{'pointtype'}; - $gnuplot_input.=' pointsize '.$curve->{'pointsize'}; - } } + if (($curve->{'linestyle'} eq 'points') || + ($curve->{'linestyle'} eq 'linespoints') || + ($curve->{'linestyle'} eq 'errorbars') || + ($curve->{'linestyle'} eq 'xerrorbars') || + ($curve->{'linestyle'} eq 'yerrorbars') || + ($curve->{'linestyle'} eq 'xyerrorbars')) { + $plot_command.=' pointtype '.$curve->{'pointtype'}; + $plot_command.=' pointsize '.$curve->{'pointsize'}; + } elsif ($curve->{'linestyle'} eq 'filledcurves') { + $plot_command.= ' '.$curve->{'limit'}; + } elsif ($curve->{'linetype'} ne '' && + $curve->{'linestyle'} eq 'lines') { + $plot_command.= ' linetype '; + $plot_command.= $linetypes{$curve->{'linetype'}}; + $plot_command.= ' linecolor rgb "'; + # convert color from xaaaaaa to #aaaaaa + $curve->{'color'} =~ s/^x/#/; + $plot_command.= $curve->{'color'}.'"'; + } + $plot_command.= ' linewidth '.$curve->{'linewidth'}; + $gnuplot_input .= 'plot ' . $plot_type . ' ' . $plot_command . "\n"; } # Write the output to a file. - my $fh=Apache::File->new(">$tmpdir$filename.data"); + open (my $fh,">$tmpdir$filename.data"); + binmode($fh, ":utf8"); print $fh $gnuplot_input; close($fh); # That's all folks. @@ -1112,7 +1919,7 @@ sub write_gnuplot_file { sub check_inputs { ## Note: no inputs, no outputs - this acts only on global variables. ## Make sure we have all the input we need: - if (! %plot) { &set_defaults(\%plot,\%gnuplot_defaults); } + if (! %Apache::lonplot::plot) { &set_defaults(\%Apache::lonplot::plot,\%gnuplot_defaults); } if (! %key ) {} # No key for this plot, thats okay # if (! %axis) { &set_defaults(\%axis,\%axis_defaults); } if (! defined($title )) {} # No title for this plot, thats okay @@ -1126,7 +1933,7 @@ sub check_inputs { my $curve; foreach $curve (@curves) { if (!defined($curve->{'function'})&&!defined($curve->{'data'})){ - &Apache::lonxml::warning("One of the curves specified did not contain any or declarations\n"); + &Apache::lonxml::warning("One of the curves specified did not contain any curve data or curve function declarations\n"); return ''; } } @@ -1148,12 +1955,13 @@ sub edit_attributes { if ($defaults->{$attr}->{'edit_type'} eq 'entry') { $result .= &Apache::edit::text_arg ($description,$attr,$token, - $defaults->{$attr}->{'size'}); + $defaults->{$attr}->{'size'}, + $defaults->{$attr}->{'class'}); } elsif ($defaults->{$attr}->{'edit_type'} eq 'choice') { - $result .= &Apache::edit::select_arg + $result .= &Apache::edit::select_or_text_arg ($description,$attr,$defaults->{$attr}->{'choices'},$token); } elsif ($defaults->{$attr}->{'edit_type'} eq 'onoff') { - $result .= &Apache::edit::select_arg + $result .= &Apache::edit::select_or_text_arg ($description,$attr,['on','off'],$token); } $result .= '
'; @@ -1273,41 +2081,122 @@ sub insert_data { } ##---------------------------------------------------------------------- -# Javascript functions to display help for tags - -sub make_javascript { - my $helpwindowwidth = 400; - my $helpwindowheight = 400; - my $result = ''; - $result.=<<"ENDFUNCTION"; - -ENDFUNCTION - return $result; -} - -sub help_win { - my ($helptext)=@_; - $helptext =~ s/\n/ /g; - $helptext =~ s/\'/\\\'/g; - my $result = ''; - $result.=<<"ENDWIN"; -
-help -
-ENDWIN - return $result; -} -##---------------------------------------------------------------------- 1; __END__ +=head1 NAME + +Apache::lonplot.pm + +=head1 SYNOPSIS + +XML-based plotter of graphs + +This is part of the LearningOnline Network with CAPA project +described at http://www.lon-capa.org. + + +=head1 SUBROUTINES (parsing and edit rendering) + +=over + +=item start_gnuplot() + +=item end_gnuplot() + +=item start_xtics() + +=item end_xtics() + +=item start_ytics() + +=item end_ytics() + +=item get_font() + +=item start_key() + +=item end_key() + +=item parse_label() + +=item replace_entities() + +=item start_title() + +=item end_title() + +=item start_xlabel() + +=item end_xlabel() + +=item start_ylabel() + +=item end_label() + +=item start_curve() + +=item end_curve() + +=item start_function() + +=item end_function() + +=item start_data() + +=item end_data() + +=item start_axis() + +=item end_axis + +=back + +=head1 SUBROUTINES (Utility) + +=over + +=item set_defaults() + +=item get_attributes() + +=item write_gnuplot_file() + +=item check_inputs() + +=item edit_attributes() + +=back + +=head1 SUBROUTINES (Insertion functions for editing plots) + +=over + +=item insert_gnuplot() + +=item insert_tics() + +=item insert_xtics() + +=item insert_key() + +=item insert_axis() + +=item insert_title() + +=item insert_xlabel() + +=item insert_ylabel() + +=item insert_label() + +=item insert_curve() + +=item insert_function() + +=item insert_data() + +=back + +=cut 500 Internal Server Error

Internal Server Error

The server encountered an internal error or misconfiguration and was unable to complete your request.

Please contact the server administrator at root@localhost to inform them of the time this error occurred, and the actions you performed just before this error.

More information about this error may be available in the server error log.