[BACK]Return to lond CVS log [TXT] [DIR] Up to [LON-CAPA] / loncom

Diff for /loncom/lond between versions 1.257 and 1.299

version 1.257, 2004/09/14 20:15:22 version 1.299, 2005/10/11 21:29:36
Line 46  use Authen::Krb5; Line 46  use Authen::Krb5;
 use lib '/home/httpd/lib/perl/';  use lib '/home/httpd/lib/perl/';
 use localauth;  use localauth;
 use localenroll;  use localenroll;
   use localstudentphoto;
 use File::Copy;  use File::Copy;
   use File::Find;
 use LONCAPA::ConfigFileEdit;  use LONCAPA::ConfigFileEdit;
 use LONCAPA::lonlocal;  use LONCAPA::lonlocal;
 use LONCAPA::lonssl;  use LONCAPA::lonssl;
Line 64  my $currentdomainid; Line 66  my $currentdomainid;
   
 my $client;  my $client;
 my $clientip; # IP address of client.  my $clientip; # IP address of client.
 my $clientdns; # DNS name of client.  
 my $clientname; # LonCAPA name of client.  my $clientname; # LonCAPA name of client.
   
 my $server;  my $server;
Line 112  my %Dispatcher; Line 113  my %Dispatcher;
 #  #
 my $lastpwderror    = 13; # Largest error number from lcpasswd.  my $lastpwderror    = 13; # Largest error number from lcpasswd.
 my @passwderrors = ("ok",  my @passwderrors = ("ok",
    "lcpasswd must be run as user 'www'",     "pwchange_failure - lcpasswd must be run as user 'www'",
    "lcpasswd got incorrect number of arguments",     "pwchange_failure - lcpasswd got incorrect number of arguments",
    "lcpasswd did not get the right nubmer of input text lines",     "pwchange_failure - lcpasswd did not get the right nubmer of input text lines",
    "lcpasswd too many simultaneous pwd changes in progress",     "pwchange_failure - lcpasswd too many simultaneous pwd changes in progress",
    "lcpasswd User does not exist.",     "pwchange_failure - lcpasswd User does not exist.",
    "lcpasswd Incorrect current passwd",     "pwchange_failure - lcpasswd Incorrect current passwd",
    "lcpasswd Unable to su to root.",     "pwchange_failure - lcpasswd Unable to su to root.",
    "lcpasswd Cannot set new passwd.",     "pwchange_failure - lcpasswd Cannot set new passwd.",
    "lcpasswd Username has invalid characters",     "pwchange_failure - lcpasswd Username has invalid characters",
    "lcpasswd Invalid characters in password",     "pwchange_failure - lcpasswd Invalid characters in password",
    "lcpasswd User already exists",      "pwchange_failure - lcpasswd User already exists", 
                    "lcpasswd Something went wrong with user addition.",                     "pwchange_failure - lcpasswd Something went wrong with user addition.",
     "lcpasswd Password mismatch",     "pwchange_failure - lcpasswd Password mismatch",
     "lcpasswd Error filename is invalid");     "pwchange_failure - lcpasswd Error filename is invalid");
   
   
 #  The array below are lcuseradd error strings.:  #  The array below are lcuseradd error strings.:
Line 177  sub ResetStatistics { Line 178  sub ResetStatistics {
 #   $initcmd     - The full text of the init command.  #   $initcmd     - The full text of the init command.
 #  #
 # Implicit inputs:  # Implicit inputs:
 #    $clientdns  - The DNS name of the remote client.  
 #    $thisserver - Our DNS name.  #    $thisserver - Our DNS name.
 #  #
 # Returns:  # Returns:
Line 186  sub ResetStatistics { Line 186  sub ResetStatistics {
 #  #
 sub LocalConnection {  sub LocalConnection {
     my ($Socket, $initcmd) = @_;      my ($Socket, $initcmd) = @_;
     Debug("Attempting local connection: $initcmd client: $clientdns me: $thisserver");      Debug("Attempting local connection: $initcmd client: $clientip me: $thisserver");
     if($clientdns ne $thisserver) {      if($clientip ne "127.0.0.1") {
  &logthis('<font color="red"> LocalConnection rejecting non local: '   &logthis('<font color="red"> LocalConnection rejecting non local: '
  ."$clientdns ne $thisserver </font>");   ."$clientip ne $thisserver </font>");
  close $Socket;   close $Socket;
  return undef;   return undef;
     }  else {      }  else {
Line 473  sub CopyFile { Line 473  sub CopyFile {
   
     my ($oldfile, $newfile) = @_;      my ($oldfile, $newfile) = @_;
   
     #  The file must exist:      if (! copy($oldfile,$newfile)) {
           return 0;
     if(-e $oldfile) {  
   
  # Read the old file.  
   
  my $oldfh = IO::File->new("< $oldfile");  
  if(!$oldfh) {  
     return 0;  
  }  
  my @contents = <$oldfh>;  # Suck in the entire file.  
   
  # write the backup file:  
   
  my $newfh = IO::File->new("> $newfile");  
  if(!(defined $newfh)){  
     return 0;  
  }  
  my $lines = scalar @contents;  
  for (my $i =0; $i < $lines; $i++) {  
     print $newfh ($contents[$i]);  
  }  
   
  $oldfh->close;  
  $newfh->close;  
   
  chmod(0660, $newfile);  
   
  return 1;  
       
     } else {  
  return 0;  
     }      }
       chmod(0660, $newfile);
       return 1;
 }  }
 #  #
 #  Host files are passed out with externally visible host IPs.  #  Host files are passed out with externally visible host IPs.
Line 1130  sub read_profile { Line 1102  sub read_profile {
 #      0       - Program should exit.  #      0       - Program should exit.
 #  Side effects:  #  Side effects:
 #      Reply information is sent to the client.  #      Reply information is sent to the client.
   
 sub ping_handler {  sub ping_handler {
     my ($cmd, $tail, $client) = @_;      my ($cmd, $tail, $client) = @_;
     Debug("$cmd $tail $client .. $currenthostid:");      Debug("$cmd $tail $client .. $currenthostid:");
Line 1158  sub ping_handler { Line 1129  sub ping_handler {
 #      0       - Program should exit.  #      0       - Program should exit.
 #  Side effects:  #  Side effects:
 #      Reply information is sent to the client.  #      Reply information is sent to the client.
   
 sub pong_handler {  sub pong_handler {
     my ($cmd, $tail, $replyfd) = @_;      my ($cmd, $tail, $replyfd) = @_;
   
Line 1213  sub establish_key_handler { Line 1183  sub establish_key_handler {
 }  }
 &register_handler("ekey", \&establish_key_handler, 0, 1,1);  &register_handler("ekey", \&establish_key_handler, 0, 1,1);
   
   
 #     Handler for the load command.  Returns the current system load average  #     Handler for the load command.  Returns the current system load average
 #     to the requestor.  #     to the requestor.
 #  #
Line 1248  sub load_handler { Line 1217  sub load_handler {
         
     return 1;      return 1;
 }  }
 register_handler("load", \&load_handler, 0, 1, 0);  &register_handler("load", \&load_handler, 0, 1, 0);
   
 #  #
 #   Process the userload request.  This sub returns to the client the current  #   Process the userload request.  This sub returns to the client the current
Line 1278  sub user_load_handler { Line 1247  sub user_load_handler {
           
     return 1;      return 1;
 }  }
 register_handler("userload", \&user_load_handler, 0, 1, 0);  &register_handler("userload", \&user_load_handler, 0, 1, 0);
   
 #   Process a request for the authorization type of a user:  #   Process a request for the authorization type of a user:
 #   (userauth).  #   (userauth).
Line 1314  sub user_authorization_type { Line 1283  sub user_authorization_type {
  my ($type,$otherinfo) = split(/:/,$result);   my ($type,$otherinfo) = split(/:/,$result);
  if($type =~ /^krb/) {   if($type =~ /^krb/) {
     $type = $result;      $type = $result;
  }   } else {
  &Reply( $replyfd, "$type:\n", $userinput);              $type .= ':';
           }
    &Reply( $replyfd, "$type\n", $userinput);
     }      }
       
     return 1;      return 1;
Line 1335  sub user_authorization_type { Line 1306  sub user_authorization_type {
 #      0       - Program should exit  #      0       - Program should exit
 # Implicit Output:  # Implicit Output:
 #    a reply is written to the client.  #    a reply is written to the client.
   
 sub push_file_handler {  sub push_file_handler {
     my ($cmd, $tail, $client) = @_;      my ($cmd, $tail, $client) = @_;
   
Line 1378  sub push_file_handler { Line 1348  sub push_file_handler {
 # Side Effects:  # Side Effects:
 #   The reply is written to  $client.  #   The reply is written to  $client.
 #  #
   
 sub du_handler {  sub du_handler {
     my ($cmd, $ududir, $client) = @_;      my ($cmd, $ududir, $client) = @_;
     my ($ududir) = split(/:/,$ududir); # Make 'telnet' testing easier.      my ($ududir) = split(/:/,$ududir); # Make 'telnet' testing easier.
Line 1395  sub du_handler { Line 1364  sub du_handler {
     #  etc.      #  etc.
     #      #
     if (-d $ududir) {      if (-d $ududir) {
  #  And as Shakespeare would say to make   my $total_size=0;
  #  assurance double sure,    my $code=sub { 
  # use execute_command to ensure that the command is not executed in      if ($_=~/\.\d+\./) { return;} 
  # a shell that can screw us up.      if ($_=~/\.meta$/) { return;}
       $total_size+=(stat($_))[7];
  my $duout = execute_command("du -ks $ududir");   };
  $duout=~s/[^\d]//g; #preserve only the numbers   chdir($ududir);
  &Reply($client,"$duout\n","$cmd:$ududir");   find($code,$ududir);
    $total_size=int($total_size/1024);
    &Reply($client,"$total_size\n","$cmd:$ududir");
     } else {      } else {
   
  &Failure($client, "bad_directory:$ududir\n","$cmd:$ududir");    &Failure($client, "bad_directory:$ududir\n","$cmd:$ududir"); 
   
     }      }
     return 1;      return 1;
 }  }
 &register_handler("du", \&du_handler, 0, 1, 0);  &register_handler("du", \&du_handler, 0, 1, 0);
   
   #
   # The ls_handler routine should be considered obosolete and is retained
   # for communication with legacy servers.  Please see the ls2_handler.
 #  #
 #   ls  - list the contents of a directory.  For each file in the  #   ls  - list the contents of a directory.  For each file in the
 #    selected directory the filename followed by the full output of  #    selected directory the filename followed by the full output of
Line 1430  sub du_handler { Line 1401  sub du_handler {
 #   The reply is written to  $client.  #   The reply is written to  $client.
 #  #
 sub ls_handler {  sub ls_handler {
       # obsoleted by ls2_handler
     my ($cmd, $ulsdir, $client) = @_;      my ($cmd, $ulsdir, $client) = @_;
   
     my $userinput = "$cmd:$ulsdir";      my $userinput = "$cmd:$ulsdir";
Line 1442  sub ls_handler { Line 1414  sub ls_handler {
  if(-d $ulsdir) {   if(-d $ulsdir) {
     if (opendir(LSDIR,$ulsdir)) {      if (opendir(LSDIR,$ulsdir)) {
  while ($ulsfn=readdir(LSDIR)) {   while ($ulsfn=readdir(LSDIR)) {
     undef $obs, $rights;       undef($obs);
       undef($rights); 
     my @ulsstats=stat($ulsdir.'/'.$ulsfn);      my @ulsstats=stat($ulsdir.'/'.$ulsfn);
     #We do some obsolete checking here      #We do some obsolete checking here
     if(-e $ulsdir.'/'.$ulsfn.".meta") {       if(-e $ulsdir.'/'.$ulsfn.".meta") { 
Line 1476  sub ls_handler { Line 1449  sub ls_handler {
 }  }
 &register_handler("ls", \&ls_handler, 0, 1, 0);  &register_handler("ls", \&ls_handler, 0, 1, 0);
   
   #
   # Please also see the ls_handler, which this routine obosolets.
   # ls2_handler differs from ls_handler in that it escapes its return 
   # values before concatenating them together with ':'s.
   #
   #   ls2  - list the contents of a directory.  For each file in the
   #    selected directory the filename followed by the full output of
   #    the stat function is returned.  The returned info for each
   #    file are separated by ':'.  The stat fields are separated by &'s.
   # Parameters:
   #    $cmd        - The command that dispatched us (ls).
   #    $ulsdir     - The directory path to list... I'm not sure what this
   #                  is relative as things like ls:. return e.g.
   #                  no_such_dir.
   #    $client     - Socket open on the client.
   # Returns:
   #     1 - indicating that the daemon should not disconnect.
   # Side Effects:
   #   The reply is written to  $client.
   #
   sub ls2_handler {
       my ($cmd, $ulsdir, $client) = @_;
   
       my $userinput = "$cmd:$ulsdir";
   
       my $obs;
       my $rights;
       my $ulsout='';
       my $ulsfn;
       if (-e $ulsdir) {
           if(-d $ulsdir) {
               if (opendir(LSDIR,$ulsdir)) {
                   while ($ulsfn=readdir(LSDIR)) {
                       undef($obs);
       undef($rights); 
                       my @ulsstats=stat($ulsdir.'/'.$ulsfn);
                       #We do some obsolete checking here
                       if(-e $ulsdir.'/'.$ulsfn.".meta") { 
                           open(FILE, $ulsdir.'/'.$ulsfn.".meta");
                           my @obsolete=<FILE>;
                           foreach my $obsolete (@obsolete) {
                               if($obsolete =~ m|(<obsolete>)(on)|) { $obs = 1; } 
                               if($obsolete =~ m|(<copyright>)(default)|) {
                                   $rights = 1;
                               }
                           }
                       }
                       my $tmp = $ulsfn.'&'.join('&',@ulsstats);
                       if ($obs    eq '1') { $tmp.="&1"; } else { $tmp.="&0"; }
                       if ($rights eq '1') { $tmp.="&1"; } else { $tmp.="&0"; }
                       $ulsout.= &escape($tmp).':';
                   }
                   closedir(LSDIR);
               }
           } else {
               my @ulsstats=stat($ulsdir);
               $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';
           }
       } else {
           $ulsout='no_such_dir';
      }
      if ($ulsout eq '') { $ulsout='empty'; }
      &Reply($client, "$ulsout\n", $userinput); # This supports debug logging.
      return 1;
   }
   &register_handler("ls2", \&ls2_handler, 0, 1, 0);
   
 #   Process a reinit request.  Reinit requests that either  #   Process a reinit request.  Reinit requests that either
 #   lonc or lond be reinitialized so that an updated   #   lonc or lond be reinitialized so that an updated 
Line 1508  sub reinit_process_handler { Line 1545  sub reinit_process_handler {
     }      }
     return 1;      return 1;
 }  }
   
 &register_handler("reinit", \&reinit_process_handler, 1, 0, 1);  &register_handler("reinit", \&reinit_process_handler, 1, 0, 1);
   
 #  Process the editing script for a table edit operation.  #  Process the editing script for a table edit operation.
Line 1550  sub edit_table_handler { Line 1586  sub edit_table_handler {
     }      }
     return 1;      return 1;
 }  }
 register_handler("edit", \&edit_table_handler, 1, 0, 1);  &register_handler("edit", \&edit_table_handler, 1, 0, 1);
   
   
 #  #
 #   Authenticate a user against the LonCAPA authentication  #   Authenticate a user against the LonCAPA authentication
Line 1606  sub authenticate_handler { Line 1641  sub authenticate_handler {
   
     return 1;      return 1;
 }  }
   &register_handler("auth", \&authenticate_handler, 1, 1, 0);
 register_handler("auth", \&authenticate_handler, 1, 1, 0);  
   
 #  #
 #   Change a user's password.  Note that this function is complicated by  #   Change a user's password.  Note that this function is complicated by
Line 1670  sub change_password_handler { Line 1704  sub change_password_handler {
  &Failure( $client, "non_authorized\n",$userinput);   &Failure( $client, "non_authorized\n",$userinput);
     }      }
  } elsif ($howpwd eq 'unix') {   } elsif ($howpwd eq 'unix') {
     # Unix means we have to access /etc/password      my $result = &change_unix_password($uname, $npass);
     &Debug("auth is unix");  
     my $execdir=$perlvar{'lonDaemons'};  
     &Debug("Opening lcpasswd pipeline");  
     my $pf = IO::File->new("|$execdir/lcpasswd > "  
    ."$perlvar{'lonDaemons'}"  
    ."/logs/lcpasswd.log");  
     print $pf "$uname\n$npass\n$npass\n";  
     close $pf;  
     my $err = $?;  
     my $result = ($err>0 ? 'pwchange_failure' : 'ok');  
     &logthis("Result of password change for $uname: ".      &logthis("Result of password change for $uname: ".
      &lcpasswdstrerror($?));       $result);
     &Reply($client, "$result\n", $userinput);      &Reply($client, "$result\n", $userinput);
  } else {   } else {
     # this just means that the current password mode is not      # this just means that the current password mode is not
Line 1698  sub change_password_handler { Line 1722  sub change_password_handler {
   
     return 1;      return 1;
 }  }
 register_handler("passwd", \&change_password_handler, 1, 1, 0);  &register_handler("passwd", \&change_password_handler, 1, 1, 0);
   
   
 #  #
 #   Create a new user.  User in this case means a lon-capa user.  #   Create a new user.  User in this case means a lon-capa user.
Line 1738  sub add_user_handler { Line 1761  sub add_user_handler {
  if (-e $passfilename) {   if (-e $passfilename) {
     &Failure( $client, "already_exists\n", $userinput);      &Failure( $client, "already_exists\n", $userinput);
  } else {   } else {
     my @fpparts=split(/\//,$passfilename);  
     my $fpnow=$fpparts[0].'/'.$fpparts[1].'/'.$fpparts[2];  
     my $fperror='';      my $fperror='';
     for (my $i=3;$i<= ($#fpparts-1);$i++) {      if (!&mkpath($passfilename)) {
  $fpnow.='/'.$fpparts[$i];    $fperror="error: ".($!+0)." mkdir failed while attempting "
  unless (-e $fpnow) {      ."makeuser";
     &logthis("mkdir $fpnow");  
     unless (mkdir($fpnow,0777)) {  
  $fperror="error: ".($!+0)." mkdir failed while attempting "  
     ."makeuser";  
     }  
  }  
     }      }
     unless ($fperror) {      unless ($fperror) {
  my $result=&make_passwd_file($uname, $umode,$npass, $passfilename);   my $result=&make_passwd_file($uname, $umode,$npass, $passfilename);
Line 1790  sub add_user_handler { Line 1805  sub add_user_handler {
 # Implicit inputs:  # Implicit inputs:
 #    The authentication systems describe above have their own forms of implicit  #    The authentication systems describe above have their own forms of implicit
 #    input into the authentication process that are described above.  #    input into the authentication process that are described above.
   # NOTE:
   #   This is also used to change the authentication credential values (e.g. passwd).
   #   
 #  #
 sub change_authentication_handler {  sub change_authentication_handler {
   
Line 1806  sub change_authentication_handler { Line 1824  sub change_authentication_handler {
  chomp($npass);   chomp($npass);
   
  $npass=&unescape($npass);   $npass=&unescape($npass);
    my $oldauth = &get_auth_type($udom, $uname); # Get old auth info.
  my $passfilename = &password_path($udom, $uname);   my $passfilename = &password_path($udom, $uname);
  if ($passfilename) { # Not allowed to create a new user!!   if ($passfilename) { # Not allowed to create a new user!!
     my $result=&make_passwd_file($uname, $umode,$npass,$passfilename);      # If just changing the unix passwd. need to arrange to run
     &Reply($client, $result, $userinput);      # passwd since otherwise make_passwd_file will run
       # lcuseradd which fails if an account already exists
       # (to prevent an unscrupulous LONCAPA admin from stealing
       # an existing account by overwriting it as a LonCAPA account).
   
       if(($oldauth =~/^unix/) && ($umode eq "unix")) {
    my $result = &change_unix_password($uname, $npass);
    &logthis("Result of password change for $uname: ".$result);
    if ($result eq "ok") {
       &Reply($client, "$result\n")
    } else {
       &Failure($client, "$result\n");
    }
       } else {
    my $result=&make_passwd_file($uname, $umode,$npass,$passfilename);
    #
    #  If the current auth mode is internal, and the old auth mode was
    #  unix, or krb*,  and the user is an author for this domain,
    #  re-run manage_permissions for that role in order to be able
    #  to take ownership of the construction space back to www:www
    #
   
   
    if( (($oldauth =~ /^unix/) && ($umode eq "internal")) ||
       (($oldauth =~ /^internal/) && ($umode eq "unix")) ) { 
       if(&is_author($udom, $uname)) {
    &Debug(" Need to manage author permissions...");
    &manage_permissions("/$udom/_au", $udom, $uname, "$umode:");
       }
    }
    &Reply($client, $result, $userinput);
       }
          
   
  } else {          } else {       
     &Failure($client, "non_authorized\n", $userinput); # Fail the user now.      &Failure($client, "non_authorized\n", $userinput); # Fail the user now.
  }   }
Line 1921  sub update_resource_handler { Line 1973  sub update_resource_handler {
  alarm(0);   alarm(0);
     }      }
     rename($transname,$fname);      rename($transname,$fname);
       use Cache::Memcached;
       my $memcache=
    new Cache::Memcached({'servers'=>['127.0.0.1:11211']});
       my $url=$fname;
       $url=~s-^/home/httpd/html--;
       my $id=&escape('meta:'.$url);
       $memcache->delete($id);
  }   }
     }      }
     &Reply( $client, "ok\n", $userinput);      &Reply( $client, "ok\n", $userinput);
Line 1964  sub fetch_user_file_handler { Line 2023  sub fetch_user_file_handler {
  # Note that any regular files in the way of this path are   # Note that any regular files in the way of this path are
  # wiped out to deal with some earlier folly of mine.   # wiped out to deal with some earlier folly of mine.
   
  my $path = $udir;   if (!&mkpath($udir.'/'.$ufile)) {
  if ($ufile =~m|(.+)/([^/]+)$|) {      &Failure($client, "unable_to_create\n", $userinput);    
     my @parts=split('/',$1);  
     foreach my $part (@parts) {  
  $path .= '/'.$part;  
  if( -f $path) {  
     unlink($path);  
  }  
  if ((-e $path)!=1) {  
     mkdir($path,0770);  
  }  
     }  
  }   }
   
   
  my $destname=$udir.'/'.$ufile;   my $destname=$udir.'/'.$ufile;
  my $transname=$udir.'/'.$ufile.'.in.transit';   my $transname=$udir.'/'.$ufile.'.in.transit';
  my $remoteurl='http://'.$clientip.'/userfiles/'.$fname;   my $remoteurl='http://'.$clientip.'/userfiles/'.$fname;
Line 2022  sub fetch_user_file_handler { Line 2070  sub fetch_user_file_handler {
 #  #
 # Returns:  # Returns:
 #    1    - Continue processing.  #    1    - Continue processing.
   
 sub remove_user_file_handler {  sub remove_user_file_handler {
     my ($cmd, $tail, $client) = @_;      my ($cmd, $tail, $client) = @_;
   
Line 2075  sub remove_user_file_handler { Line 2122  sub remove_user_file_handler {
 #  #
 # Returns:  # Returns:
 #    1    - Continue processing.  #    1    - Continue processing.
   
 sub mkdir_user_file_handler {  sub mkdir_user_file_handler {
     my ($cmd, $tail, $client) = @_;      my ($cmd, $tail, $client) = @_;
   
Line 2089  sub mkdir_user_file_handler { Line 2135  sub mkdir_user_file_handler {
     } else {      } else {
  my $udir = &propath($udom,$uname);   my $udir = &propath($udom,$uname);
  if (-e $udir) {   if (-e $udir) {
     my $newdir=$udir.'/userfiles/'.$ufile;      my $newdir=$udir.'/userfiles/'.$ufile.'/';
     if (!-e $newdir) {      if (!&mkpath($newdir)) {
  my @parts=split('/',$newdir);   &Failure($client, "failed\n", "$cmd:$tail");
  my $path;  
  foreach my $part (@parts) {  
     $path .= '/'.$part;  
     if (!-e $path) {  
  &logthis("Making $path");  
  mkdir($path,0770);  
     }  
  }  
  if (!-e $newdir) {  
     &Failure($client, "failed\n", "$cmd:$tail");  
  } else {  
     &Reply($client, "ok\n", "$cmd:$tail");  
  }  
     } else {  
  &Failure($client, "not_found\n", "$cmd:$tail");  
     }      }
       &Reply($client, "ok\n", "$cmd:$tail");
  } else {   } else {
     &Failure($client, "not_home\n", "$cmd:$tail");      &Failure($client, "not_home\n", "$cmd:$tail");
  }   }
Line 2125  sub mkdir_user_file_handler { Line 2157  sub mkdir_user_file_handler {
 #  #
 # Returns:  # Returns:
 #    1    - Continue processing.  #    1    - Continue processing.
   
 sub rename_user_file_handler {  sub rename_user_file_handler {
     my ($cmd, $tail, $client) = @_;      my ($cmd, $tail, $client) = @_;
   
Line 2159  sub rename_user_file_handler { Line 2190  sub rename_user_file_handler {
 }  }
 &register_handler("renameuserfile", \&rename_user_file_handler, 0,1,0);  &register_handler("renameuserfile", \&rename_user_file_handler, 0,1,0);
   
   
 #  #
 #  Authenticate access to a user file by checking the user's   #  Authenticate access to a user file by checking that the token the user's 
 #  session token(?)  #  passed also exists in their session file
 #  #
 # Parameters:  # Parameters:
 #   cmd      - The request keyword that dispatched to tus.  #   cmd      - The request keyword that dispatched to tus.
Line 2170  sub rename_user_file_handler { Line 2200  sub rename_user_file_handler {
 #   client   - Filehandle open on the client.  #   client   - Filehandle open on the client.
 # Return:  # Return:
 #    1.  #    1.
   
 sub token_auth_user_file_handler {  sub token_auth_user_file_handler {
     my ($cmd, $tail, $client) = @_;      my ($cmd, $tail, $client) = @_;
   
Line 2191  sub token_auth_user_file_handler { Line 2220  sub token_auth_user_file_handler {
     return 1;      return 1;
   
 }  }
   
 &register_handler("tokenauthuserfile", \&token_auth_user_file_handler, 0,1,0);  &register_handler("tokenauthuserfile", \&token_auth_user_file_handler, 0,1,0);
   
   
 #  #
 #   Unsubscribe from a resource.  #   Unsubscribe from a resource.
 #  #
Line 2223  sub unsubscribe_handler { Line 2250  sub unsubscribe_handler {
     return 1;      return 1;
 }  }
 &register_handler("unsub", \&unsubscribe_handler, 0, 1, 0);  &register_handler("unsub", \&unsubscribe_handler, 0, 1, 0);
   
 #   Subscribe to a resource  #   Subscribe to a resource
 #  #
 # Parameters:  # Parameters:
Line 2301  sub activity_log_handler { Line 2329  sub activity_log_handler {
   
     return 1;      return 1;
 }  }
 register_handler("log", \&activity_log_handler, 0, 1, 0);  &register_handler("log", \&activity_log_handler, 0, 1, 0);
   
 #  #
 #   Put a namespace entry in a user profile hash.  #   Put a namespace entry in a user profile hash.
Line 2352  sub put_user_profile_entry { Line 2380  sub put_user_profile_entry {
 }  }
 &register_handler("put", \&put_user_profile_entry, 0, 1, 0);  &register_handler("put", \&put_user_profile_entry, 0, 1, 0);
   
   #   Put a piece of new data in hash, returns error if entry already exists
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   #
   sub newput_user_profile_entry {
       my ($cmd, $tail, $client)  = @_;
   
       my $userinput = "$cmd:$tail";
   
       my ($udom,$uname,$namespace,$what) =split(/:/,$tail,4);
       if ($namespace eq 'roles') {
           &Failure( $client, "refused\n", $userinput);
    return 1;
       }
   
       chomp($what);
   
       my $hashref = &tie_user_hash($udom, $uname, $namespace,
    &GDBM_WRCREAT(),"N",$what);
       if(!$hashref) {
    &Failure( $client, "error: ".($!)." tie(GDBM) Failed ".
     "while attempting put\n", $userinput);
    return 1;
       }
   
       my @pairs=split(/\&/,$what);
       foreach my $pair (@pairs) {
    my ($key,$value)=split(/=/,$pair);
    if (exists($hashref->{$key})) {
       &Failure($client, "key_exists: ".$key."\n",$userinput);
       return 1;
    }
       }
   
       foreach my $pair (@pairs) {
    my ($key,$value)=split(/=/,$pair);
    $hashref->{$key}=$value;
       }
   
       if (untie(%$hashref)) {
    &Reply( $client, "ok\n", $userinput);
       } else {
    &Failure($client, "error: ".($!+0)." untie(GDBM) failed ".
    "while attempting put\n", 
    $userinput);
       }
       return 1;
   }
   &register_handler("newput", \&newput_user_profile_entry, 0, 1, 0);
   
 #   # 
 #   Increment a profile entry in the user history file.  #   Increment a profile entry in the user history file.
 #   The history contains keyword value pairs.  In this case,  #   The history contains keyword value pairs.  In this case,
Line 2382  sub increment_user_value_handler { Line 2465  sub increment_user_value_handler {
     my @pairs=split(/\&/,$what);      my @pairs=split(/\&/,$what);
     foreach my $pair (@pairs) {      foreach my $pair (@pairs) {
  my ($key,$value)=split(/=/,$pair);   my ($key,$value)=split(/=/,$pair);
                   $value = &unescape($value);
  # We could check that we have a number...   # We could check that we have a number...
  if (! defined($value) || $value eq '') {   if (! defined($value) || $value eq '') {
     $value = 1;      $value = 1;
  }   }
  $hashref->{$key}+=$value;   $hashref->{$key}+=$value;
                   if ($namespace eq 'nohist_resourcetracker') {
                       if ($hashref->{$key} < 0) {
                           $hashref->{$key} = 0;
                       }
                   }
     }      }
     if (untie(%$hashref)) {      if (untie(%$hashref)) {
  &Reply( $client, "ok\n", $userinput);   &Reply( $client, "ok\n", $userinput);
Line 2406  sub increment_user_value_handler { Line 2495  sub increment_user_value_handler {
 }  }
 &register_handler("inc", \&increment_user_value_handler, 0, 1, 0);  &register_handler("inc", \&increment_user_value_handler, 0, 1, 0);
   
   
 #  #
 #   Put a new role for a user.  Roles are LonCAPA's packaging of permissions.  #   Put a new role for a user.  Roles are LonCAPA's packaging of permissions.
 #   Each 'role' a user has implies a set of permissions.  Adding a new role  #   Each 'role' a user has implies a set of permissions.  Adding a new role
Line 2446  sub roles_put_handler { Line 2534  sub roles_put_handler {
     #  is done on close this improves the chances the log will be an un-      #  is done on close this improves the chances the log will be an un-
     #  corrupted ordered thing.      #  corrupted ordered thing.
     if ($hashref) {      if ($hashref) {
    my $pass_entry = &get_auth_type($udom, $uname);
    my ($auth_type,$pwd)  = split(/:/, $pass_entry);
    $auth_type = $auth_type.":";
  my @pairs=split(/\&/,$what);   my @pairs=split(/\&/,$what);
  foreach my $pair (@pairs) {   foreach my $pair (@pairs) {
     my ($key,$value)=split(/=/,$pair);      my ($key,$value)=split(/=/,$pair);
     &manage_permissions($key, $udom, $uname,      &manage_permissions($key, $udom, $uname,
        &get_auth_type( $udom, $uname));         $auth_type);
     $hashref->{$key}=$value;      $hashref->{$key}=$value;
  }   }
  if (untie($hashref)) {   if (untie($hashref)) {
Line 2611  sub get_profile_entry_encrypted { Line 2702  sub get_profile_entry_encrypted {
     return 1;      return 1;
 }  }
 &register_handler("eget", \&get_profile_entry_encrypted, 0, 1, 0);  &register_handler("eget", \&get_profile_entry_encrypted, 0, 1, 0);
   
 #  #
 #   Deletes a key in a user profile database.  #   Deletes a key in a user profile database.
 #     #   
Line 2629  sub get_profile_entry_encrypted { Line 2721  sub get_profile_entry_encrypted {
 #     0   - Exit server.  #     0   - Exit server.
 #  #
 #  #
   
 sub delete_profile_entry {  sub delete_profile_entry {
     my ($cmd, $tail, $client) = @_;      my ($cmd, $tail, $client) = @_;
   
Line 2658  sub delete_profile_entry { Line 2749  sub delete_profile_entry {
     return 1;      return 1;
 }  }
 &register_handler("del", \&delete_profile_entry, 0, 1, 0);  &register_handler("del", \&delete_profile_entry, 0, 1, 0);
   
 #  #
 #  List the set of keys that are defined in a profile database file.  #  List the set of keys that are defined in a profile database file.
 #  A successful reply from this will contain an & separated list of  #  A successful reply from this will contain an & separated list of
Line 2836  sub dump_with_regexp { Line 2928  sub dump_with_regexp {
   
     return 1;      return 1;
 }  }
   
 &register_handler("dump", \&dump_with_regexp, 0, 1, 0);  &register_handler("dump", \&dump_with_regexp, 0, 1, 0);
   
 #  Store a set of key=value pairs associated with a versioned name.  #  Store a set of key=value pairs associated with a versioned name.
Line 2868  sub store_handler { Line 2959  sub store_handler {
  chomp($what);   chomp($what);
  my @pairs=split(/\&/,$what);   my @pairs=split(/\&/,$what);
  my $hashref  = &tie_user_hash($udom, $uname, $namespace,   my $hashref  = &tie_user_hash($udom, $uname, $namespace,
        &GDBM_WRCREAT(), "P",         &GDBM_WRCREAT(), "S",
        "$rid:$what");         "$rid:$what");
  if ($hashref) {   if ($hashref) {
     my $now = time;      my $now = time;
Line 2902  sub store_handler { Line 2993  sub store_handler {
     return 1;      return 1;
 }  }
 &register_handler("store", \&store_handler, 0, 1, 0);  &register_handler("store", \&store_handler, 0, 1, 0);
   
 #  #
 #  Dump out all versions of a resource that has key=value pairs associated  #  Dump out all versions of a resource that has key=value pairs associated
 # with it for each version.  These resources are built up via the store  # with it for each version.  These resources are built up via the store
Line 3002  sub send_chat_handler { Line 3094  sub send_chat_handler {
     return 1;      return 1;
 }  }
 &register_handler("chatsend", \&send_chat_handler, 0, 1, 0);  &register_handler("chatsend", \&send_chat_handler, 0, 1, 0);
   
 #  #
 #   Retrieve the set of chat messagss from a discussion board.  #   Retrieve the set of chat messagss from a discussion board.
 #  #
Line 3137  sub reply_query_handler { Line 3230  sub reply_query_handler {
 #   $tail     - Tail of the command.  In this case consists of a colon  #   $tail     - Tail of the command.  In this case consists of a colon
 #               separated list contaning the domain to apply this to and  #               separated list contaning the domain to apply this to and
 #               an ampersand separated list of keyword=value pairs.  #               an ampersand separated list of keyword=value pairs.
   #               Each value is a colon separated list that includes:  
   #               description, institutional code and course owner.
   #               For backward compatibility with versions included
   #               in LON-CAPA 1.1.X (and earlier) and 1.2.X, institutional
   #               code and/or course owner are preserved from the existing 
   #               record when writing a new record in response to 1.1 or 
   #               1.2 implementations of lonnet::flushcourselogs().   
   #                      
 #   $client   - Socket open on the client.  #   $client   - Socket open on the client.
 # Returns:  # Returns:
 #   1    - indicating that processing should continue  #   1    - indicating that processing should continue
Line 3150  sub put_course_id_handler { Line 3251  sub put_course_id_handler {
   
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
   
     my ($udom, $what) = split(/:/, $tail);      my ($udom, $what) = split(/:/, $tail,2);
     chomp($what);      chomp($what);
     my $now=time;      my $now=time;
     my @pairs=split(/\&/,$what);      my @pairs=split(/\&/,$what);
Line 3158  sub put_course_id_handler { Line 3259  sub put_course_id_handler {
     my $hashref = &tie_domain_hash($udom, "nohist_courseids", &GDBM_WRCREAT());      my $hashref = &tie_domain_hash($udom, "nohist_courseids", &GDBM_WRCREAT());
     if ($hashref) {      if ($hashref) {
  foreach my $pair (@pairs) {   foreach my $pair (@pairs) {
     my ($key,$descr,$inst_code)=split(/=/,$pair);              my ($key,$courseinfo) = split(/=/,$pair,2);
     $hashref->{$key}=$descr.':'.$inst_code.':'.$now;              $courseinfo =~ s/=/:/g;
   
               my @current_items = split(/:/,$hashref->{$key});
               shift(@current_items); # remove description
               pop(@current_items);   # remove last access
               my $numcurrent = scalar(@current_items);
   
               my @new_items = split(/:/,$courseinfo);
               my $numnew = scalar(@new_items);
               if ($numcurrent > 0) {
                   if ($numnew == 1) { # flushcourselogs() from 1.1 or earlier
                       $courseinfo .= ':'.join(':',@current_items);
                   } elsif ($numnew == 2) { # flushcourselogs() from 1.2.X
                       $courseinfo .= ':'.$current_items[$numcurrent-1];
                   }
               }
       $hashref->{$key}=$courseinfo.':'.$now;
  }   }
  if (untie(%$hashref)) {   if (untie(%$hashref)) {
     &Reply( $client, "ok\n", $userinput);      &Reply( $client, "ok\n", $userinput);
Line 3197  sub put_course_id_handler { Line 3314  sub put_course_id_handler {
 #                 description - regular expression that is used to filter  #                 description - regular expression that is used to filter
 #                            the dump.  Only keywords matching this regexp  #                            the dump.  Only keywords matching this regexp
 #                            will be used.  #                            will be used.
   #                 institutional code - optional supplied code to filter 
   #                            the dump. Only courses with an institutional code 
   #                            that match the supplied code will be returned.
   #                 owner    - optional supplied username of owner to filter
   #                            the dump.  Only courses for which the course 
   #                            owner matches the supplied username will be
   #                            returned. Implicit assumption that owner
   #                            is a user in the domain in which the
   #                            course database is defined.
 #     $client  - The socket open on the client.  #     $client  - The socket open on the client.
 # Returns:  # Returns:
 #    1     - Continue processing.  #    1     - Continue processing.
Line 3207  sub dump_course_id_handler { Line 3333  sub dump_course_id_handler {
   
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
   
     my ($udom,$since,$description) =split(/:/,$tail);      my ($udom,$since,$description,$instcodefilter,$ownerfilter,$coursefilter) =split(/:/,$tail);
     if (defined($description)) {      if (defined($description)) {
  $description=&unescape($description);   $description=&unescape($description);
     } else {      } else {
  $description='.';   $description='.';
     }      }
       if (defined($instcodefilter)) {
           $instcodefilter=&unescape($instcodefilter);
       } else {
           $instcodefilter='.';
       }
       if (defined($ownerfilter)) {
           $ownerfilter=&unescape($ownerfilter);
       } else {
           $ownerfilter='.';
       }
       if (defined($coursefilter)) {
           $coursefilter=&unescape($coursefilter);
       } else {
           $coursefilter='.';
       }
   
     unless (defined($since)) { $since=0; }      unless (defined($since)) { $since=0; }
     my $qresult='';      my $qresult='';
     my $hashref = &tie_domain_hash($udom, "nohist_courseids", &GDBM_WRCREAT());      my $hashref = &tie_domain_hash($udom, "nohist_courseids", &GDBM_WRCREAT());
     if ($hashref) {      if ($hashref) {
  while (my ($key,$value) = each(%$hashref)) {   while (my ($key,$value) = each(%$hashref)) {
     my ($descr,$lasttime,$inst_code);      my ($descr,$lasttime,$inst_code,$owner);
     if ($value =~ m/^([^\:]*):([^\:]*):(\d+)$/) {              my @courseitems = split(/:/,$value);
  ($descr,$inst_code,$lasttime)=($1,$2,$3);              $lasttime = pop(@courseitems);
     } else {      ($descr,$inst_code,$owner)=@courseitems;
  ($descr,$lasttime) = split(/\:/,$value);  
     }  
     if ($lasttime<$since) { next; }      if ($lasttime<$since) { next; }
     if ($description eq '.') {              my $match = 1;
  $qresult.=$key.'='.$descr.':'.$inst_code.'&';      unless ($description eq '.') {
     } else {   my $unescapeDescr = &unescape($descr);
  my $unescapeVal = &unescape($descr);   unless (eval('$unescapeDescr=~/\Q$description\E/i')) {
  if (eval('$unescapeVal=~/\Q$description\E/i')) {                      $match = 0;
     $qresult.=$key.'='.$descr.':'.$inst_code.'&';  
  }   }
               }
               unless ($instcodefilter eq '.' || !defined($instcodefilter)) {
                   my $unescapeInstcode = &unescape($inst_code);
                   unless (eval('$unescapeInstcode=~/\Q$instcodefilter\E/i')) {
                       $match = 0;
                   }
     }      }
               unless ($ownerfilter eq '.' || !defined($ownerfilter)) {
                   my $unescapeOwner = &unescape($owner);
                   unless (eval('$unescapeOwner=~/\Q$ownerfilter\E/i')) {
                       $match = 0;
                   }
               }
               unless ($coursefilter eq '.' || !defined($coursefilter)) {
                   my $unescapeCourse = &unescape($key);
                   unless (eval('$unescapeCourse=~/^$udom(_)\Q$coursefilter\E$/')) {
                       $match = 0;
                   }
               }
               if ($match == 1) {
                   $qresult.=$key.'='.$descr.':'.$inst_code.':'.$owner.'&';
               }
  }   }
  if (untie(%$hashref)) {   if (untie(%$hashref)) {
     chop($qresult);      chop($qresult);
Line 3296  sub put_id_handler { Line 3456  sub put_id_handler {
   
     return 1;      return 1;
 }  }
   
 &register_handler("idput", \&put_id_handler, 0, 1, 0);  &register_handler("idput", \&put_id_handler, 0, 1, 0);
   
 #  #
 #  Retrieves a set of id values from the id database.  #  Retrieves a set of id values from the id database.
 #  Returns an & separated list of results, one for each requested id to the  #  Returns an & separated list of results, one for each requested id to the
Line 3346  sub get_id_handler { Line 3506  sub get_id_handler {
           
     return 1;      return 1;
 }  }
   &register_handler("idget", \&get_id_handler, 0, 1, 0);
   
 register_handler("idget", \&get_id_handler, 0, 1, 0);  #
   # Puts broadcast e-mail sent by Domain Coordinator in nohist_dcmail database 
   #
   # Parameters
   #   $cmd       - Command keyword that caused us to be dispatched.
   #   $tail      - Tail of the command.  Consists of a colon separated:
   #               domain - the domain whose dcmail we are recording
   #               email    Consists of key=value pair 
   #                        where key is unique msgid
   #                        and value is message (in XML)
   #   $client    - Socket open on the client.
   #
   # Returns:
   #    1 - indicating processing should continue.
   # Side effects
   #     reply is written to $client.
   #
   sub put_dcmail_handler {
       my ($cmd,$tail,$client) = @_;
       my $userinput = "$cmd:$tail";
                                                                                   
       my ($udom,$what)=split(/:/,$tail);
       chomp($what);
       my $hashref = &tie_domain_hash($udom, "nohist_dcmail", &GDBM_WRCREAT());
       if ($hashref) {
           my ($key,$value)=split(/=/,$what);
           $hashref->{$key}=$value;
       }
       if (untie(%$hashref)) {
           &Reply($client, "ok\n", $userinput);
       } else {
           &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
                    "while attempting dcmailput\n", $userinput);
       }
       return 1;
   }
   &register_handler("dcmailput", \&put_dcmail_handler, 0, 1, 0);
   
 #  #
   # Retrieves broadcast e-mail from nohist_dcmail database
   # Returns to client an & separated list of key=value pairs,
   # where key is msgid and value is message information.
   #
   # Parameters
   #   $cmd       - Command keyword that caused us to be dispatched.
   #   $tail      - Tail of the command.  Consists of a colon separated:
   #               domain - the domain whose dcmail table we dump
   #               startfilter - beginning of time window 
   #               endfilter - end of time window
   #               sendersfilter - & separated list of username:domain 
   #                 for senders to search for.
   #   $client    - Socket open on the client.
   #
   # Returns:
   #    1 - indicating processing should continue.
   # Side effects
   #     reply (& separated list of msgid=messageinfo pairs) is 
   #     written to $client.
   #
   sub dump_dcmail_handler {
       my ($cmd, $tail, $client) = @_;
                                                                                   
       my $userinput = "$cmd:$tail";
       my ($udom,$startfilter,$endfilter,$sendersfilter) = split(/:/,$tail);
       chomp($sendersfilter);
       my @senders = ();
       if (defined($startfilter)) {
           $startfilter=&unescape($startfilter);
       } else {
           $startfilter='.';
       }
       if (defined($endfilter)) {
           $endfilter=&unescape($endfilter);
       } else {
           $endfilter='.';
       }
       if (defined($sendersfilter)) {
           $sendersfilter=&unescape($sendersfilter);
           if ($sendersfilter =~ /\&/) {
               @senders = split(/\&/,$sendersfilter);
           } else {
               $senders[0] = $sendersfilter;
           }
       }
   
       my $qresult='';
       my $hashref = &tie_domain_hash($udom, "nohist_dcmail", &GDBM_WRCREAT());
       if ($hashref) {
           while (my ($key,$value) = each(%$hashref)) {
               my $match = 1;
               my ($timestamp,$subj,$uname,$udom) = split(/:/,&unescape($key),5);
               $timestamp = &unescape($timestamp);
               $subj = &unescape($subj);
               $uname = &unescape($uname);
               $udom = &unescape($udom);
               unless ($startfilter eq '.' || !defined($startfilter)) {
                   if ($timestamp < $startfilter) {
                       $match = 0;
                   }
               }
               unless ($endfilter eq '.' || !defined($endfilter)) {
                   if ($timestamp > $endfilter) {
                       $match = 0;
                   }
               }
               unless (@senders < 1) {
                   unless (grep/^$uname:$udom$/,@senders) {
                       $match = 0;
                   }
               }
               if ($match == 1) {
                   $qresult.=$key.'='.$value.'&';
               }
           }
           if (untie(%$hashref)) {
               chop($qresult);
               &Reply($client, "$qresult\n", $userinput);
           } else {
               &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
                       "while attempting dcmaildump\n", $userinput);
           }
       } else {
           &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
                   "while attempting dcmaildump\n", $userinput);
       }
       return 1;
   }
   
   &register_handler("dcmaildump", \&dump_dcmail_handler, 0, 1, 0);
   
   #
   # Puts domain roles in nohist_domainroles database
   #
   # Parameters
   #   $cmd       - Command keyword that caused us to be dispatched.
   #   $tail      - Tail of the command.  Consists of a colon separated:
   #               domain - the domain whose roles we are recording  
   #               role -   Consists of key=value pair
   #                        where key is unique role
   #                        and value is start/end date information
   #   $client    - Socket open on the client.
   #
   # Returns:
   #    1 - indicating processing should continue.
   # Side effects
   #     reply is written to $client.
   #
   
   sub put_domainroles_handler {
       my ($cmd,$tail,$client) = @_;
   
       my $userinput = "$cmd:$tail";
       my ($udom,$what)=split(/:/,$tail);
       chomp($what);
       my @pairs=split(/\&/,$what);
       my $hashref = &tie_domain_hash($udom, "nohist_domainroles", &GDBM_WRCREAT());
       if ($hashref) {
           foreach my $pair (@pairs) {
               my ($key,$value)=split(/=/,$pair);
               $hashref->{$key}=$value;
           }
           if (untie(%$hashref)) {
               &Reply($client, "ok\n", $userinput);
           } else {
               &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
                        "while attempting domroleput\n", $userinput);
           }
       } else {
           &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
                     "while attempting domroleput\n", $userinput);
       }
                                                                                     
       return 1;
   }
   
   &register_handler("domroleput", \&put_domainroles_handler, 0, 1, 0);
   
   #
   # Retrieves domain roles from nohist_domainroles database
   # Returns to client an & separated list of key=value pairs,
   # where key is role and value is start and end date information.
   #
   # Parameters
   #   $cmd       - Command keyword that caused us to be dispatched.
   #   $tail      - Tail of the command.  Consists of a colon separated:
   #               domain - the domain whose domain roles table we dump
   #   $client    - Socket open on the client.
   #
   # Returns:
   #    1 - indicating processing should continue.
   # Side effects
   #     reply (& separated list of role=start/end info pairs) is
   #     written to $client.
   #
   sub dump_domainroles_handler {
       my ($cmd, $tail, $client) = @_;
                                                                                              
       my $userinput = "$cmd:$tail";
       my ($udom,$startfilter,$endfilter,$rolesfilter) = split(/:/,$tail);
       chomp($rolesfilter);
       my @roles = ();
       if (defined($startfilter)) {
           $startfilter=&unescape($startfilter);
       } else {
           $startfilter='.';
       }
       if (defined($endfilter)) {
           $endfilter=&unescape($endfilter);
       } else {
           $endfilter='.';
       }
       if (defined($rolesfilter)) {
           $rolesfilter=&unescape($rolesfilter);
           if ($rolesfilter =~ /\&/) {
               @roles = split(/\&/,$rolesfilter);
           } else {
               $roles[0] = $rolesfilter;
           }
       }
                                                                                              
       my $hashref = &tie_domain_hash($udom, "nohist_domainroles", &GDBM_WRCREAT());
       if ($hashref) {
           my $qresult = '';
           while (my ($key,$value) = each(%$hashref)) {
               my $match = 1;
               my ($start,$end) = split(/:/,&unescape($value));
               my ($trole,$uname,$udom,$runame,$rudom,$rsec) = split(/:/,&unescape($key));
               unless ($startfilter eq '.' || !defined($startfilter)) {
                   if ($start >= $startfilter) {
                       $match = 0;
                   }
               }
               unless ($endfilter eq '.' || !defined($endfilter)) {
                   if ($end <= $endfilter) {
                       $match = 0;
                   }
               }
               unless (@roles < 1) {
                   unless (grep/^$trole$/,@roles) {
                       $match = 0;
                   }
               }
               if ($match == 1) {
                   $qresult.=$key.'='.$value.'&';
               }
           }
           if (untie(%$hashref)) {
               chop($qresult);
               &Reply($client, "$qresult\n", $userinput);
           } else {
               &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
                       "while attempting domrolesdump\n", $userinput);
           }
       } else {
           &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
                   "while attempting domrolesdump\n", $userinput);
       }
       return 1;
   }
   
   &register_handler("domrolesdump", \&dump_domainroles_handler, 0, 1, 0);
   
   
 #  Process the tmpput command I'm not sure what this does.. Seems to  #  Process the tmpput command I'm not sure what this does.. Seems to
 #  create a file in the lonDaemons/tmp directory of the form $id.tmp  #  create a file in the lonDaemons/tmp directory of the form $id.tmp
 # where Id is the client's ip concatenated with a sequence number.  # where Id is the client's ip concatenated with a sequence number.
Line 3390  sub tmp_put_handler { Line 3811  sub tmp_put_handler {
       
 }  }
 &register_handler("tmpput", \&tmp_put_handler, 0, 1, 0);  &register_handler("tmpput", \&tmp_put_handler, 0, 1, 0);
   
 #   Processes the tmpget command.  This command returns the contents  #   Processes the tmpget command.  This command returns the contents
 #  of a temporary resource file(?) created via tmpput.  #  of a temporary resource file(?) created via tmpput.
 #  #
Line 3402  sub tmp_put_handler { Line 3824  sub tmp_put_handler {
 #    1         - Inidcating processing can continue.  #    1         - Inidcating processing can continue.
 # Side effects:  # Side effects:
 #   A reply is sent to the client.  #   A reply is sent to the client.
   
 #  #
 sub tmp_get_handler {  sub tmp_get_handler {
     my ($cmd, $id, $client) = @_;      my ($cmd, $id, $client) = @_;
Line 3425  sub tmp_get_handler { Line 3846  sub tmp_get_handler {
     return 1;      return 1;
 }  }
 &register_handler("tmpget", \&tmp_get_handler, 0, 1, 0);  &register_handler("tmpget", \&tmp_get_handler, 0, 1, 0);
   
 #  #
 #  Process the tmpdel command.  This command deletes a temp resource  #  Process the tmpdel command.  This command deletes a temp resource
 #  created by the tmpput command.  #  created by the tmpput command.
Line 3458  sub tmp_del_handler { Line 3880  sub tmp_del_handler {
   
 }  }
 &register_handler("tmpdel", \&tmp_del_handler, 0, 1, 0);  &register_handler("tmpdel", \&tmp_del_handler, 0, 1, 0);
   
 #  #
 #   Processes the setannounce command.  This command  #   Processes the setannounce command.  This command
 #   creates a file named announce.txt in the top directory of  #   creates a file named announce.txt in the top directory of
Line 3496  sub set_announce_handler { Line 3919  sub set_announce_handler {
     return 1;      return 1;
 }  }
 &register_handler("setannounce", \&set_announce_handler, 0, 1, 0);  &register_handler("setannounce", \&set_announce_handler, 0, 1, 0);
   
 #  #
 #  Return the version of the daemon.  This can be used to determine  #  Return the version of the daemon.  This can be used to determine
 #  the compatibility of cross version installations or, alternatively to  #  the compatibility of cross version installations or, alternatively to
Line 3520  sub get_version_handler { Line 3944  sub get_version_handler {
     return 1;      return 1;
 }  }
 &register_handler("version", \&get_version_handler, 0, 1, 0);  &register_handler("version", \&get_version_handler, 0, 1, 0);
   
 #  Set the current host and domain.  This is used to support  #  Set the current host and domain.  This is used to support
 #  multihomed systems.  Each IP of the system, or even separate daemons  #  multihomed systems.  Each IP of the system, or even separate daemons
 #  on the same IP can be treated as handling a separate lonCAPA virtual  #  on the same IP can be treated as handling a separate lonCAPA virtual
Line 3656  sub validate_course_owner_handler { Line 4081  sub validate_course_owner_handler {
     return 1;      return 1;
 }  }
 &register_handler("autonewcourse", \&validate_course_owner_handler, 0, 1, 0);  &register_handler("autonewcourse", \&validate_course_owner_handler, 0, 1, 0);
   
 #  #
 #   Validate a course section in the official schedule of classes  #   Validate a course section in the official schedule of classes
 #   from the institutions point of view (part of autoenrollment).  #   from the institutions point of view (part of autoenrollment).
Line 3736  sub create_auto_enroll_password_handler Line 4162  sub create_auto_enroll_password_handler
 #  #
 # Returns:  # Returns:
 #   1     - Continue processing.  #   1     - Continue processing.
   
 sub retrieve_auto_file_handler {  sub retrieve_auto_file_handler {
     my ($cmd, $tail, $client)    = @_;      my ($cmd, $tail, $client)    = @_;
     my $userinput                = "cmd:$tail";      my $userinput                = "cmd:$tail";
Line 3821  sub get_institutional_code_format_handle Line 4246  sub get_institutional_code_format_handle
           
     return 1;      return 1;
 }  }
   &register_handler("autoinstcodeformat",
     \&get_institutional_code_format_handler,0,1,0);
   
 &register_handler("autoinstcodeformat", \&get_institutional_code_format_handler,  
   0,1,0);  
   
 #  
 #  
 #  
 #  
 #  #
   # Gets a student's photo to exist (in the correct image type) in the user's 
   # directory.
   # Formal Parameters:
   #    $cmd     - The command request that got us dispatched.
   #    $tail    - A colon separated set of words that will be split into:
   #               $domain - student's domain
   #               $uname  - student username
   #               $type   - image type desired
   #    $client  - The socket open on the client.
   # Returns:
   #    1 - continue processing.
   sub student_photo_handler {
       my ($cmd, $tail, $client) = @_;
       my ($domain,$uname,$type) = split(/:/, $tail);
   
       my $path=&propath($domain,$uname).
    '/userfiles/internal/studentphoto.'.$type;
       if (-e $path) {
    &Reply($client,"ok\n","$cmd:$tail");
    return 1;
       }
       &mkpath($path);
       my $file=&localstudentphoto::fetch($domain,$uname);
       if (!$file) {
    &Failure($client,"unavailable\n","$cmd:$tail");
    return 1;
       }
       if (!-e $path) { &convert_photo($file,$path); }
       if (-e $path) {
    &Reply($client,"ok\n","$cmd:$tail");
    return 1;
       }
       &Failure($client,"unable_to_convert\n","$cmd:$tail");
       return 1;
   }
   &register_handler("studentphoto", \&student_photo_handler, 0, 1, 0);
   
   # mkpath makes all directories for a file, expects an absolute path with a
   # file or a trailing / if just a dir is passed
   # returns 1 on success 0 on failure
   sub mkpath {
       my ($file)=@_;
       my @parts=split(/\//,$file,-1);
       my $now=$parts[0].'/'.$parts[1].'/'.$parts[2];
       for (my $i=3;$i<= ($#parts-1);$i++) {
    $now.='/'.$parts[$i]; 
    if (!-e $now) {
       if  (!mkdir($now,0770)) { return 0; }
    }
       }
       return 1;
   }
   
 #---------------------------------------------------------------  #---------------------------------------------------------------
 #  #
 #   Getting, decoding and dispatching requests:  #   Getting, decoding and dispatching requests:
 #  #
   
 #  #
 #   Get a Request:  #   Get a Request:
 #   Gets a Request message from the client.  The transaction  #   Gets a Request message from the client.  The transaction
Line 3941  sub process_request { Line 4413  sub process_request {
   
     }          }    
   
 #------------------- Commands not yet in spearate handlers. --------------      print $client "unknown_cmd\n";
   
 #------------------------------- is auto-enrollment enabled?  
     if ($userinput =~/^autorun/) {  
  if (isClient) {  
     my ($cmd,$cdom) = split(/:/,$userinput);  
     my $outcome = &localenroll::run($cdom);  
     print $client "$outcome\n";  
  } else {  
     print $client "0\n";  
  }  
 #------------------------------- get official sections (for auto-enrollment).  
     } elsif ($userinput =~/^autogetsections/) {  
  if (isClient) {  
     my ($cmd,$coursecode,$cdom)=split(/:/,$userinput);  
     my @secs = &localenroll::get_sections($coursecode,$cdom);  
     my $seclist = &escape(join(':',@secs));  
     print $client "$seclist\n";  
  } else {  
     print $client "refused\n";  
  }  
 #----------------------- validate owner of new course section (for auto-enrollment).  
     } elsif ($userinput =~/^autonewcourse/) {  
  if (isClient) {  
     my ($cmd,$inst_course_id,$owner,$cdom)=split(/:/,$userinput);  
     my $outcome = &localenroll::new_course($inst_course_id,$owner,$cdom);  
     print $client "$outcome\n";  
  } else {  
     print $client "refused\n";  
  }  
 #-------------- validate course section in schedule of classes (for auto-enrollment).  
     } elsif ($userinput =~/^autovalidatecourse/) {  
  if (isClient) {  
     my ($cmd,$inst_course_id,$cdom)=split(/:/,$userinput);  
     my $outcome=&localenroll::validate_courseID($inst_course_id,$cdom);  
     print $client "$outcome\n";  
  } else {  
     print $client "refused\n";  
  }  
 #--------------------------- create password for new user (for auto-enrollment).  
     } elsif ($userinput =~/^autocreatepassword/) {  
  if (isClient) {  
     my ($cmd,$authparam,$cdom)=split(/:/,$userinput);  
     my ($create_passwd,$authchk);  
     ($authparam,$create_passwd,$authchk) = &localenroll::create_password($authparam,$cdom);  
     print $client &escape($authparam.':'.$create_passwd.':'.$authchk)."\n";  
  } else {  
     print $client "refused\n";  
  }  
 #---------------------------  read and remove temporary files (for auto-enrollment).  
     } elsif ($userinput =~/^autoretrieve/) {  
  if (isClient) {  
     my ($cmd,$filename) = split(/:/,$userinput);  
     my $source = $perlvar{'lonDaemons'}.'/tmp/'.$filename;  
     if ( (-e $source) && ($filename ne '') ) {  
  my $reply = '';  
  if (open(my $fh,$source)) {  
     while (<$fh>) {  
  chomp($_);  
  $_ =~ s/^\s+//g;  
  $_ =~ s/\s+$//g;  
  $reply .= $_;  
     }  
     close($fh);  
     print $client &escape($reply)."\n";  
 #                                unlink($source);  
  } else {  
     print $client "error\n";  
  }  
     } else {  
  print $client "error\n";  
     }  
  } else {  
     print $client "refused\n";  
  }  
 #---------------------  read and retrieve institutional code format   
 #                          (for support form).  
     } elsif ($userinput =~/^autoinstcodeformat/) {  
  if (isClient) {  
     my $reply;  
     my($cmd,$cdom,$course) = split(/:/,$userinput);  
     my @pairs = split/\&/,$course;  
     my %instcodes = ();  
     my %codes = ();  
     my @codetitles = ();  
     my %cat_titles = ();  
     my %cat_order = ();  
     foreach (@pairs) {  
  my ($key,$value) = split/=/,$_;  
  $instcodes{&unescape($key)} = &unescape($value);  
     }  
     my $formatreply = &localenroll::instcode_format($cdom,\%instcodes,\%codes,\@codetitles,\%cat_titles,\%cat_order);  
     if ($formatreply eq 'ok') {  
  my $codes_str = &hash2str(%codes);  
  my $codetitles_str = &array2str(@codetitles);  
  my $cat_titles_str = &hash2str(%cat_titles);  
  my $cat_order_str = &hash2str(%cat_order);  
  print $client $codes_str.':'.$codetitles_str.':'.$cat_titles_str.':'.$cat_order_str."\n";  
     }  
  } else {  
     print $client "refused\n";  
  }  
 # ------------------------------------------------------------- unknown command  
   
     } else {  
  # unknown command  
  print $client "unknown_cmd\n";  
     }  
 # -------------------------------------------------------------------- complete  # -------------------------------------------------------------------- complete
     Debug("process_request - returning 1");      Debug("process_request - returning 1");
     return 1;      return 1;
Line 4309  sub ReadHostTable { Line 4674  sub ReadHostTable {
     open (CONFIG,"$perlvar{'lonTabDir'}/hosts.tab") || die "Can't read host file";      open (CONFIG,"$perlvar{'lonTabDir'}/hosts.tab") || die "Can't read host file";
     my $myloncapaname = $perlvar{'lonHostID'};      my $myloncapaname = $perlvar{'lonHostID'};
     Debug("My loncapa name is : $myloncapaname");      Debug("My loncapa name is : $myloncapaname");
       my %name_to_ip;
     while (my $configline=<CONFIG>) {      while (my $configline=<CONFIG>) {
  if (!($configline =~ /^\s*\#/)) {   if ($configline !~ /^\s*\#/ && $configline !~ /^\s*$/ ) {
     my ($id,$domain,$role,$name,$ip)=split(/:/,$configline);      my ($id,$domain,$role,$name)=split(/:/,$configline);
     chomp($ip); $ip=~s/\D+$//;      $name=~s/\s//g;
       my $ip;
       if (!exists($name_to_ip{$name})) {
    $ip = gethostbyname($name);
    if (!$ip || length($ip) ne 4) {
       &logthis("Skipping host $id name $name no IP found\n");
       next;
    }
    $ip=inet_ntoa($ip);
    $name_to_ip{$name} = $ip;
       } else {
    $ip = $name_to_ip{$name};
       }
     $hostid{$ip}=$id;         # LonCAPA name of host by IP.      $hostid{$ip}=$id;         # LonCAPA name of host by IP.
     $hostdom{$id}=$domain;    # LonCAPA domain name of host.       $hostdom{$id}=$domain;    # LonCAPA domain name of host. 
     $hostip{$id}=$ip;      # IP address of host.      $hostip{$id}=$ip;         # IP address of host.
     $hostdns{$name} = $id;    # LonCAPA name of host by DNS.      $hostdns{$name} = $id;    # LonCAPA name of host by DNS.
   
     if ($id eq $perlvar{'lonHostID'}) {       if ($id eq $perlvar{'lonHostID'}) { 
Line 4452  sub Reply { Line 4830  sub Reply {
     Debug("Request was $request  Reply was $reply");      Debug("Request was $request  Reply was $reply");
   
     $Transactions++;      $Transactions++;
   
   
 }  }
   
   
Line 4496  sub logstatus { Line 4872  sub logstatus {
  flock(LOG,LOCK_EX);   flock(LOG,LOCK_EX);
  print LOG $$."\t".$clientname."\t".$currenthostid."\t"   print LOG $$."\t".$clientname."\t".$currenthostid."\t"
     .$status."\t".$lastlog."\t $keymode\n";      .$status."\t".$lastlog."\t $keymode\n";
  flock(DB,LOCK_UN);   flock(LOG,LOCK_UN);
  close(LOG);   close(LOG);
     }      }
     &status("Finished logging");      &status("Finished logging");
Line 4681  $SIG{USR2} = \&UpdateHosts; Line 5057  $SIG{USR2} = \&UpdateHosts;
   
 ReadHostTable;  ReadHostTable;
   
   my $dist=`$perlvar{'lonDaemons'}/distprobe`;
   
 # --------------------------------------------------------------  # --------------------------------------------------------------
 #   Accept connections.  When a connection comes in, it is validated  #   Accept connections.  When a connection comes in, it is validated
 #   and if good, a child process is created to process transactions  #   and if good, a child process is created to process transactions
Line 4727  sub make_new_child { Line 5105  sub make_new_child {
     if (defined($iaddr)) {      if (defined($iaddr)) {
  $clientip  = inet_ntoa($iaddr);   $clientip  = inet_ntoa($iaddr);
  Debug("Connected with $clientip");   Debug("Connected with $clientip");
  $clientdns = gethostbyaddr($iaddr, AF_INET);  
  Debug("Connected with $clientdns by name");  
     } else {      } else {
  &logthis("Unable to determine clientip");   &logthis("Unable to determine clientip");
  $clientip='Unavailable';   $clientip='Unavailable';
Line 4758  sub make_new_child { Line 5134  sub make_new_child {
 #        my $tmpsnum=0;            # Now global  #        my $tmpsnum=0;            # Now global
 #---------------------------------------------------- kerberos 5 initialization  #---------------------------------------------------- kerberos 5 initialization
         &Authen::Krb5::init_context();          &Authen::Krb5::init_context();
         &Authen::Krb5::init_ets();   unless (($dist eq 'fedora4') || ($dist eq 'suse9.3')) {
       &Authen::Krb5::init_ets();
    }
   
  &status('Accepted connection');   &status('Accepted connection');
 # =============================================================================  # =============================================================================
Line 4768  sub make_new_child { Line 5146  sub make_new_child {
   
  ReadManagerTable; # May also be a manager!!   ReadManagerTable; # May also be a manager!!
   
  my $clientrec=($hostid{$clientip}     ne undef);   my $outsideip=$clientip;
  my $ismanager=($managers{$clientip}    ne undef);   if ($clientip eq '127.0.0.1') {
       $outsideip=$hostip{$perlvar{'lonHostID'}};
    }
   
    my $clientrec=($hostid{$outsideip}     ne undef);
    my $ismanager=($managers{$outsideip}    ne undef);
  $clientname  = "[unknonwn]";   $clientname  = "[unknonwn]";
  if($clientrec) { # Establish client type.   if($clientrec) { # Establish client type.
     $ConnectionType = "client";      $ConnectionType = "client";
     $clientname = $hostid{$clientip};      $clientname = $hostid{$outsideip};
     if($ismanager) {      if($ismanager) {
  $ConnectionType = "both";   $ConnectionType = "both";
     }      }
  } else {   } else {
     $ConnectionType = "manager";      $ConnectionType = "manager";
     $clientname = $managers{$clientip};      $clientname = $managers{$outsideip};
  }   }
  my $clientok;   my $clientok;
   
Line 4923  sub make_new_child { Line 5306  sub make_new_child {
     exit;      exit;
           
 }  }
   #
   #   Determine if a user is an author for the indicated domain.
   #
   # Parameters:
   #    domain          - domain to check in .
   #    user            - Name of user to check.
   #
   # Return:
   #     1             - User is an author for domain.
   #     0             - User is not an author for domain.
   sub is_author {
       my ($domain, $user) = @_;
   
       &Debug("is_author: $user @ $domain");
   
       my $hashref = &tie_user_hash($domain, $user, "roles",
    &GDBM_READER());
   
       #  Author role should show up as a key /domain/_au
   
       my $key   = "/$domain/_au";
       my $value = $hashref->{$key};
   
       if(defined($value)) {
    &Debug("$user @ $domain is an author");
       }
   
       return defined($value);
   }
 #  #
 #   Checks to see if the input roleput request was to set  #   Checks to see if the input roleput request was to set
 # an author role.  If so, invokes the lchtmldir script to set  # an author role.  If so, invokes the lchtmldir script to set
Line 4936  sub make_new_child { Line 5346  sub make_new_child {
 #    user      - Name of the user for which the role is being put.  #    user      - Name of the user for which the role is being put.
 #    authtype  - The authentication type associated with the user.  #    authtype  - The authentication type associated with the user.
 #  #
 sub manage_permissions  sub manage_permissions {
 {  
   
     my ($request, $domain, $user, $authtype) = @_;      my ($request, $domain, $user, $authtype) = @_;
   
       &Debug("manage_permissions: $request $domain $user $authtype");
   
     # See if the request is of the form /$domain/_au      # See if the request is of the form /$domain/_au
     if($request =~ /^(\/$domain\/_au)$/) { # It's an author rolesput...      if($request =~ /^(\/\Q$domain\E\/_au)$/) { # It's an author rolesput...
  my $execdir = $perlvar{'lonDaemons'};   my $execdir = $perlvar{'lonDaemons'};
  my $userhome= "/home/$user" ;   my $userhome= "/home/$user" ;
  &logthis("system $execdir/lchtmldir $userhome $user $authtype");   &logthis("system $execdir/lchtmldir $userhome $user $authtype");
    &Debug("Setting homedir permissions for $userhome");
  system("$execdir/lchtmldir $userhome $user $authtype");   system("$execdir/lchtmldir $userhome $user $authtype");
     }      }
 }  }
Line 4961  sub manage_permissions Line 5372  sub manage_permissions
 #  #
 sub password_path {  sub password_path {
     my ($domain, $user) = @_;      my ($domain, $user) = @_;
       return &propath($domain, $user).'/passwd';
   
     my $path   = &propath($domain, $user);  
     $path  .= "/passwd";  
   
     return $path;  
 }  }
   
 #   Password Filename  #   Password Filename
Line 5041  sub get_auth_type Line 5447  sub get_auth_type
  Debug("Password info = $realpassword\n");   Debug("Password info = $realpassword\n");
  my ($authtype, $contentpwd) = split(/:/, $realpassword);   my ($authtype, $contentpwd) = split(/:/, $realpassword);
  Debug("Authtype = $authtype, content = $contentpwd\n");   Debug("Authtype = $authtype, content = $contentpwd\n");
  my $availinfo = '';   return "$authtype:$contentpwd";     
  if($authtype eq 'krb4' or $authtype eq 'krb5') {  
     $availinfo = $contentpwd;  
  }  
   
  return "$authtype:$availinfo";  
     } else {      } else {
  Debug("Returning nouser");   Debug("Returning nouser");
  return "nouser";   return "nouser";
Line 5144  sub validate_user { Line 5545  sub validate_user {
  my $krbserver  = &Authen::Krb5::parse_name($krbservice);   my $krbserver  = &Authen::Krb5::parse_name($krbservice);
  my $credentials= &Authen::Krb5::cc_default();   my $credentials= &Authen::Krb5::cc_default();
  $credentials->initialize($krbclient);   $credentials->initialize($krbclient);
  my $krbreturn  = &Authen::KRb5::get_in_tkt_with_password($krbclient,   my $krbreturn  = &Authen::Krb5::get_in_tkt_with_password($krbclient,
  $krbserver,   $krbserver,
  $password,   $password,
  $credentials);   $credentials);
Line 5344  sub thisversion { Line 5745  sub thisversion {
 sub subscribe {  sub subscribe {
     my ($userinput,$clientip)=@_;      my ($userinput,$clientip)=@_;
     my $result;      my $result;
     my ($cmd,$fname)=split(/:/,$userinput);      my ($cmd,$fname)=split(/:/,$userinput,2);
     my $ownership=&ishome($fname);      my $ownership=&ishome($fname);
     if ($ownership eq 'owner') {      if ($ownership eq 'owner') {
 # explitly asking for the current version?  # explitly asking for the current version?
Line 5388  sub subscribe { Line 5789  sub subscribe {
     }      }
     return $result;      return $result;
 }  }
   #  Change the passwd of a unix user.  The caller must have
   #  first verified that the user is a loncapa user.
   #
   # Parameters:
   #    user      - Unix user name to change.
   #    pass      - New password for the user.
   # Returns:
   #    ok    - if success
   #    other - Some meaningfule error message string.
   # NOTE:
   #    invokes a setuid script to change the passwd.
   sub change_unix_password {
       my ($user, $pass) = @_;
   
       &Debug("change_unix_password");
       my $execdir=$perlvar{'lonDaemons'};
       &Debug("Opening lcpasswd pipeline");
       my $pf = IO::File->new("|$execdir/lcpasswd > "
      ."$perlvar{'lonDaemons'}"
      ."/logs/lcpasswd.log");
       print $pf "$user\n$pass\n$pass\n";
       close $pf;
       my $err = $?;
       return ($err < @passwderrors) ? $passwderrors[$err] : 
    "pwchange_falure - unknown error";
   
       
   }
   
   
 sub make_passwd_file {  sub make_passwd_file {
     my ($uname, $umode,$npass,$passfilename)=@_;      my ($uname, $umode,$npass,$passfilename)=@_;
Line 5395  sub make_passwd_file { Line 5825  sub make_passwd_file {
     if ($umode eq 'krb4' or $umode eq 'krb5') {      if ($umode eq 'krb4' or $umode eq 'krb5') {
  {   {
     my $pf = IO::File->new(">$passfilename");      my $pf = IO::File->new(">$passfilename");
     print $pf "$umode:$npass\n";      if ($pf) {
    print $pf "$umode:$npass\n";
       } else {
    $result = "pass_file_failed_error";
       }
  }   }
     } elsif ($umode eq 'internal') {      } elsif ($umode eq 'internal') {
  my $salt=time;   my $salt=time;
Line 5404  sub make_passwd_file { Line 5838  sub make_passwd_file {
  {   {
     &Debug("Creating internal auth");      &Debug("Creating internal auth");
     my $pf = IO::File->new(">$passfilename");      my $pf = IO::File->new(">$passfilename");
     print $pf "internal:$ncpass\n";       if($pf) {
    print $pf "internal:$ncpass\n"; 
       } else {
    $result = "pass_file_failed_error";
       }
  }   }
     } elsif ($umode eq 'localauth') {      } elsif ($umode eq 'localauth') {
  {   {
     my $pf = IO::File->new(">$passfilename");      my $pf = IO::File->new(">$passfilename");
     print $pf "localauth:$npass\n";      if($pf) {
    print $pf "localauth:$npass\n";
       } else {
    $result = "pass_file_failed_error";
       }
  }   }
     } elsif ($umode eq 'unix') {      } elsif ($umode eq 'unix') {
  {   {
Line 5435  sub make_passwd_file { Line 5877  sub make_passwd_file {
  print $se "$npass\n";   print $se "$npass\n";
  print $se "$lc_error_file\n"; # Status -> unique file.   print $se "$lc_error_file\n"; # Status -> unique file.
     }      }
     my $error = IO::File->new("< $lc_error_file");      if (-r $lc_error_file) {
     my $useraddok = <$error>;   &Debug("Opening error file: $lc_error_file");
     $error->close;   my $error = IO::File->new("< $lc_error_file");
     unlink($lc_error_file);   my $useraddok = <$error>;
    $error->close;
     chomp $useraddok;   unlink($lc_error_file);
   
     if($useraddok > 0) {   chomp $useraddok;
  my $error_text = &lcuseraddstrerror($useraddok);  
  &logthis("Failed lcuseradd: $error_text");   if($useraddok > 0) {
  $result = "lcuseradd_failed:$error_text\n";      my $error_text = &lcuseraddstrerror($useraddok);
       &logthis("Failed lcuseradd: $error_text");
       $result = "lcuseradd_failed:$error_text\n";
    }  else {
       my $pf = IO::File->new(">$passfilename");
       if($pf) {
    print $pf "unix:\n";
       } else {
    $result = "pass_file_failed_error";
       }
    }
     }  else {      }  else {
  my $pf = IO::File->new(">$passfilename");   &Debug("Could not locate lcuseradd error: $lc_error_file");
  print $pf "unix:\n";   $result="bug_lcuseradd_no_output_file";
     }      }
  }   }
     } elsif ($umode eq 'none') {      } elsif ($umode eq 'none') {
  {   {
     my $pf = IO::File->new("> $passfilename");      my $pf = IO::File->new("> $passfilename");
     print $pf "none:\n";      if($pf) {
    print $pf "none:\n";
       } else {
    $result = "pass_file_failed_error";
       }
  }   }
     } else {      } else {
  $result="auth_mode_error\n";   $result="auth_mode_error\n";
Line 5462  sub make_passwd_file { Line 5918  sub make_passwd_file {
     return $result;      return $result;
 }  }
   
   sub convert_photo {
       my ($start,$dest)=@_;
       system("convert $start $dest");
   }
   
 sub sethost {  sub sethost {
     my ($remotereq) = @_;      my ($remotereq) = @_;
     my (undef,$hostid)=split(/:/,$remotereq);      my (undef,$hostid)=split(/:/,$remotereq);
Removed from v.1.257  
changed lines
  Added in v.1.299

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
500 Internal Server Error

Internal Server Error

The server encountered an internal error or misconfiguration and was unable to complete your request.

Please contact the server administrator at root@localhost to inform them of the time this error occurred, and the actions you performed just before this error.

More information about this error may be available in the server error log.